This is a bit map representing the active alarms for this breaker:
b0 - Minimum current threshold exceeded (critical)
b1 - Low current threshold exceeded (warning)
b2 - High current threshold exceeded (warning)
b3 - Maximum current threshold exceeded (critical)
b4 - Breaker is open (critical)
If a bit is set, the corresponding alarm is active.
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
This is a bit map representing the active alarms for this breaker:
b0 - Minimum current threshold exceeded (critical)
b1 - Low current threshold exceeded (warning)
b2 - High current threshold exceeded (warning)
b3 - Maximum current threshold exceeded (critical)
b4 - Breaker is open (critical)
If a bit is set, the corresponding alarm is active.
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
isxModularDistModuleBreakerAlarmStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a bit map representing the active alarms for this breaker: b0 - Minimum current threshold exceeded (critical) b1 - Low current threshold exceeded (warning) b2 - High current threshold exceeded (warning) b3 - Maximum current threshold exceeded (critical) b4 - Breaker is open (critical) If a bit is set, the corresponding alarm is active." ::= { isxModularDistModuleBreakerEntry 3 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
isxModularDistModuleBreakerAlarmStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is a bit map representing the active alarms for this breaker: b0 - Minimum current threshold exceeded (critical) b1 - Low current threshold exceeded (warning) b2 - High current threshold exceeded (warning) b3 - Maximum current threshold exceeded (critical) b4 - Breaker is open (critical) If a bit is set, the corresponding alarm is active." ::= { isxModularDistModuleBreakerEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.22.2.4.1.1 | isxModularDistModuleBreakerModIndex | 0 | 0 | The distribution module number. |
| 1.3.6.1.4.1.318.1.1.22.2.4.1.2 | isxModularDistModuleBreakerPhaseIndex | 0 | 0 | The index to an individual breaker in the distribution module. The index also corresponds to the system phase to which the brea… |
| 1.3.6.1.4.1.318.1.1.22.2.4.1.4 | isxModularDistModuleBreakerRating | 0 | 0 | The current rating of the breaker. |
| 1.3.6.1.4.1.318.1.1.22.2.4.1.5 | isxModularDistModuleBreakerPhysicalGroup | 0 | 0 | Numeric value used to indicate that a breaker is a part of a multi-pole breaker. Breakers within a distribution module, with equ… |
| 1.3.6.1.4.1.318.1.1.22.2.4.1.6 | isxModularDistModuleBreakerCableNum | 0 | 0 | Numeric value used to indicate the distribution cable to which this breaker is connected. These distribution cables are describe… |
| 1.3.6.1.4.1.318.1.1.22.2.4.1.7 | isxModularDistModuleBreakerPosition | 0 | 0 | The physical status of this breaker pole, either closed or open (including tripped). |
| 1.3.6.1.4.1.318.1.1.22.2.4.1.8 | isxModularDistModuleBreakerPositionAlarms | 0 | 0 | Enable or disable breaker position alarms for this circuit breaker. |
| 1.3.6.1.4.1.318.1.1.22.2.4.1.9 | isxModularDistModuleBreakerCurrent | 0 | 0 | The current flowing though this breaker. Measured in tenths of amps. |
| 1.3.6.1.4.1.318.1.1.22.2.4.1.10 | isxModularDistModuleBreakerPercent | 0 | 0 | The loading on this breaker as a percentage of the breaker's current rating. Expressed in tenths of percent. |
| 1.3.6.1.4.1.318.1.1.22.2.4.1.11 | isxModularDistModuleBreakerPower | 0 | 0 | The power being supplied through this breaker. Measured in tenths of kW. |