Getting this OID will return the phase load state.
normal(1) indicates that the bank is operating properly
within the atsConfigPhaseLowLoadThreshold and
atsConfigPhaseNearOverLoadThreshold OID values.
lowload(2) indicates that the bank load has dropped below
the atsConfigPhaseLowLoadThreshold OID value. An SNMP trap
will occur when this state is entered or cleared.
nearoverload(3) indicates that the bank load is greater than
or equal to the atsConfigPhaseNearOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
overload(4) indicates that the bank load is greater than or
equal to the atsConfigPhaseOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
Getting this OID will return the phase load state.
normal(1) indicates that the bank is operating properly
within the atsConfigPhaseLowLoadThreshold and
atsConfigPhaseNearOverLoadThreshold OID values.
lowload(2) indicates that the bank load has dropped below
the atsConfigPhaseLowLoadThreshold OID value. An SNMP trap
will occur when this state is entered or cleared.
nearoverload(3) indicates that the bank load is greater than
or equal to the atsConfigPhaseNearOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
overload(4) indicates that the bank load is greater than or
equal to the atsConfigPhaseOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
atsOutputPhaseState OBJECT-TYPE SYNTAX INTEGER { normal (1), lowload (2), nearoverload (3), overload (4) } ACCESS read-only STATUS mandatory DESCRIPTION "Getting this OID will return the phase load state. normal(1) indicates that the bank is operating properly within the atsConfigPhaseLowLoadThreshold and atsConfigPhaseNearOverLoadThreshold OID values. lowload(2) indicates that the bank load has dropped below the atsConfigPhaseLowLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared. nearoverload(3) indicates that the bank load is greater than or equal to the atsConfigPhaseNearOverLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared. overload(4) indicates that the bank load is greater than or equal to the atsConfigPhaseOverLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared." ::= { atsOutputPhaseEntry 19 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
atsOutputPhaseState OBJECT-TYPE SYNTAX INTEGER { normal (1), lowload (2), nearoverload (3), overload (4) } ACCESS read-only STATUS mandatory DESCRIPTION "Getting this OID will return the phase load state. normal(1) indicates that the bank is operating properly within the atsConfigPhaseLowLoadThreshold and atsConfigPhaseNearOverLoadThreshold OID values. lowload(2) indicates that the bank load has dropped below the atsConfigPhaseLowLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared. nearoverload(3) indicates that the bank load is greater than or equal to the atsConfigPhaseNearOverLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared. overload(4) indicates that the bank load is greater than or equal to the atsConfigPhaseOverLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared." ::= { atsOutputPhaseEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.1 | atsOutputPhaseTableIndex | 0 | 0 | The output identifier. |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.2 | atsOutputPhaseIndex | 0 | 0 | Description of each output phase utilized in this device and one for neutral. |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.3 | atsOutputVoltage | 0 | 0 | The output voltage in VAC, or -1 if it's unsupported by this ATS. |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.4 | atsOutputCurrent | 0 | 0 | The output current in 0.1 amperes drawn by the load on the ATS, or -1 if it's unsupported by this ATS. |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.5 | atsOutputMaxCurrent | 0 | 0 | The maximum output current in 0.1 amperes measured since the last time this variable was read or reset (atsStatusResetMaxMinValue… |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.6 | atsOutputMinCurrent | 0 | 0 | The minimum output current in 0.1 amperes measured since the last time this variable was read or reset (atsStatusResetMaxMinValue… |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.7 | atsOutputLoad | 0 | 0 | The output load in VA, or -1 if it's unsupported by this ATS. |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.8 | atsOutputMaxLoad | 0 | 0 | The maximum output load in VA measured since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (… |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.9 | atsOutputMinLoad | 0 | 0 | The minimum output load in VA measured since the last time this variable was read or reset (atsStatusResetMaxMinValues). Returns (… |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.10 | atsOutputPercentLoad | 0 | 0 | The percentage of the ATS load capacity in VA at redundancy @ (n + x) presently being used on this output phase, or -1 if it's un… |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.11 | atsOutputMaxPercentLoad | 0 | 0 | The maximum percentage of the ATS load capacity in VA measured at redundancy @ (n + x) presently being used on this output phase … |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.12 | atsOutputMinPercentLoad | 0 | 0 | The minimum percentage of the ATS load capacity in VA measured at redundancy @ (n + x) presently being used on this output phase … |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.13 | atsOutputPower | 0 | 0 | The output power in Watts, or -1 if it's unsupported by this ATS. |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.14 | atsOutputMaxPower | 0 | 0 | The maximum output power in Watts measured since the last time this variable was read or reset (atsStatusResetMaxMinValues). Retur… |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.15 | atsOutputMinPower | 0 | 0 | The minimum output power in Watts measured since the last time this variable was read or reset (atsStatusResetMaxMinValues). Retur… |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.16 | atsOutputPercentPower | 0 | 0 | The percentage of the ATSpower capacity in Watts at redundancy @ (n + x) presently being used on this output phase, or -1 if it's… |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.17 | atsOutputMaxPercentPower | 0 | 0 | The maximum percentage of the ATSpower capacity in Watts measured at redundancy @ (n + x) presently being used on this output pha… |
| 1.3.6.1.4.1.318.1.1.8.5.4.3.1.18 | atsOutputMinPercentPower | 0 | 0 | The minimum percentage of the ATSpower capacity in Watts measured at redundancy @ (n + x) presently being used on this output pha… |