Getting this OID will return the bank load state.
normal(1) indicates that the bank is
operating properly within the atsConfigBankLowLoadThreshold
and atsConfigBankNearOverLoadThreshold OID values.
lowload(2) indicates that the bank load has dropped below the
atsConfigBankLowLoadThreshold OID value. An SNMP trap will
occur when this state is entered or cleared.
nearoverload(3) indicates that the bank load is greater than
or equal to the atsConfigBankNearOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
overload(4) indicates that the bank load is greater than or
equal to the atsConfigBankOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
Getting this OID will return the bank load state.
normal(1) indicates that the bank is
operating properly within the atsConfigBankLowLoadThreshold
and atsConfigBankNearOverLoadThreshold OID values.
lowload(2) indicates that the bank load has dropped below the
atsConfigBankLowLoadThreshold OID value. An SNMP trap will
occur when this state is entered or cleared.
nearoverload(3) indicates that the bank load is greater than
or equal to the atsConfigBankNearOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
overload(4) indicates that the bank load is greater than or
equal to the atsConfigBankOverLoadThreshold OID value.
An SNMP trap will occur when this state is entered or cleared.
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
atsOutputBankState OBJECT-TYPE SYNTAX INTEGER { normal (1), lowload (2), nearoverload (3), overload (4) } ACCESS read-only STATUS mandatory DESCRIPTION "Getting this OID will return the bank load state. normal(1) indicates that the bank is operating properly within the atsConfigBankLowLoadThreshold and atsConfigBankNearOverLoadThreshold OID values. lowload(2) indicates that the bank load has dropped below the atsConfigBankLowLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared. nearoverload(3) indicates that the bank load is greater than or equal to the atsConfigBankNearOverLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared. overload(4) indicates that the bank load is greater than or equal to the atsConfigBankOverLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared." ::= { atsOutputBankEntry 5 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
atsOutputBankState OBJECT-TYPE SYNTAX INTEGER { normal (1), lowload (2), nearoverload (3), overload (4) } ACCESS read-only STATUS mandatory DESCRIPTION "Getting this OID will return the bank load state. normal(1) indicates that the bank is operating properly within the atsConfigBankLowLoadThreshold and atsConfigBankNearOverLoadThreshold OID values. lowload(2) indicates that the bank load has dropped below the atsConfigBankLowLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared. nearoverload(3) indicates that the bank load is greater than or equal to the atsConfigBankNearOverLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared. overload(4) indicates that the bank load is greater than or equal to the atsConfigBankOverLoadThreshold OID value. An SNMP trap will occur when this state is entered or cleared." ::= { atsOutputBankEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.1 | atsOutputBankTableIndex | 0 | 0 | The index to the bank table entry. |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.2 | atsOutputPhase | 0 | 0 | The phase number of an ATS |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.3 | atsOutputBank | 0 | 0 | The bank number of an ATS |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.4 | atsOutputBankCurrent | 0 | 0 | Getting this OID will return the bank current measured in tenths of Amps. |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.6 | atsOutputBankOutputVoltage | 0 | 0 | The output voltage in VAC, or -1 if it's unsupported by this ATS. |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.7 | atsOutputBankMaxCurrent | 0 | 0 | The maximum output current, on the bank represented by OID atsOutputBank, in 0.1 amperes measured since the last time this variab… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.8 | atsOutputBankMinCurrent | 0 | 0 | The minimum output current, on the bank represented by OID atsOutputBank, in 0.1 amperes measured since the last time this variab… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.9 | atsOutputBankLoad | 0 | 0 | The output load, on the bank represented by OID atsOutputBank, in VA, or -1 if it's unsupported by this ATS. |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.10 | atsOutputBankMaxLoad | 0 | 0 | The maximum output load, on the bank represented by OID atsOutputBank, in VA measured since the last time this variable was read o… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.11 | atsOutputBankMinLoad | 0 | 0 | The minimum output load, on the bank represented by OID atsOutputBank, in VA measured since the last time this variable was read o… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.12 | atsOutputBankPercentLoad | 0 | 0 | The percentage of the ATS load capacity in VA at redundancy @ (n + x) presently being used on this bank, represented by OID atsOu… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.13 | atsOutputBankMaxPercentLoad | 0 | 0 | The maximum percentage of the ATS load capacity in VA measured at redundancy @ (n + x) presently being used on this bank, represe… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.14 | atsOutputBankMinPercentLoad | 0 | 0 | The minimum percentage of the ATS load capacity in VA measured at redundancy @ (n + x) presently being used on this bank, represe… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.15 | atsOutputBankPower | 0 | 0 | The output power in Watts on the bank represented by OID atsOutputBank or -1 if it's unsupported by this ATS. |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.16 | atsOutputBankMaxPower | 0 | 0 | The maximum output power in Watts measured on the bank represented by OID atsOutputBank since the last time this variable was rea… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.17 | atsOutputBankMinPower | 0 | 0 | The minimum output power in Watts measured on the bank represented by OID atsOutputBank since the last time this variable was rea… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.18 | atsOutputBankPercentPower | 0 | 0 | The percentage of the ATSpower capacity in Watts at redundancy @ (n + x) presently being used on this bank, represented by OID at… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.19 | atsOutputBankMaxPercentPower | 0 | 0 | The maximum percentage of the ATSpower capacity in Watts measured at redundancy @ (n + x) presently being used on this bank, repr… |
| 1.3.6.1.4.1.318.1.1.8.5.4.5.1.20 | atsOutputBankMinPercentPower | 0 | 0 | The minimum percentage of the ATSpower capacity in Watts measured at redundancy @ (n + x) presently being used on this bank, repr… |