The total number of octets transmitted out of the
interface, including framing characters.
Parsed from file SSG-5000-CHASSIS-MIB.my.txt
Company: nortel
Module: SSG-5000-CHASSIS-MIB
Vendor: Nortel Networks
Module: SSG-5000-CHASSIS-MIB (SSG-5000-CHASSIS-MIB.my)
Type: TABULAR
Access: read-only
Syntax: Counter32
Automatically extracted from www.mibdepot.com
ssg5000ETHPortOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::= { ssg5000ETHPortStatEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.1 | ssg5000ETHPortIndex | 0 | 0 | The ETH port index. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.2 | ssg5000ETHPortAdminStatus | 0 | 0 | The Administrative status of the ETH port. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.3 | ssg5000ETHPortOperStatus | 0 | 0 | The Operational status of the ETH port. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.4 | ssg5000ETHPortAlarms | 0 | 0 | The bitmask value that ETH port's alarms, bitmap [32,... ,9,8,7,6,5,4,3,2,1], refer ETHPortAlarmType for alarm acronyms.… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.5 | ssg5000ETHPortMtu | 0 | 0 | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.6 | ssg5000ETHPortSpeed | 0 | 0 | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those … |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.7 | ssg5000ETHPortPhysAddress | 0 | 0 | The ethernet interface's MAC address. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.8 | ssg5000ETHPortLastChange | 0 | 0 | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior t… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.9 | ssg5000ETHPortInOctets | 0 | 0 | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.10 | ssg5000ETHPortInUcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast … |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.11 | ssg5000ETHPortInNUcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast addr… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.12 | ssg5000ETHPortInDiscards | 0 | 0 | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being de… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.13 | ssg5000ETHPortInErrors | 0 | 0 | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.14 | ssg5000ETHPortInUnknownProtos | 0 | 0 | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.15 | ssg5000ETHPortInFcsErrors | 0 | 0 | The total number of packets received with frame checksum errors. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.17 | ssg5000ETHPortOutUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or … |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.18 | ssg5000ETHPortOutNUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broa… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.19 | ssg5000ETHPortOutDiscards | 0 | 0 | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being t… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.20 | ssg5000ETHPortOutErrors | 0 | 0 | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.21 | ssg5000ETHPortOutQLen | 0 | 0 | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.22 | ssg5000ETHPortAdminPhysMode | 0 | 0 | This value indicates the administratively configured physical mode of the local interface. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.23 | ssg5000ETHPortOperPhysMode | 0 | 0 | This value indicates the current operational physical mode of the local interface. |