An estimate of the interface's current bandwidth in
bits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. If the bandwidth of the interface is
greater than the maximum value reportable by this
object then this object should report its maximum
value (4,294,967,295).
Parsed from file SSG-5000-CHASSIS-MIB.my.txt
Company: nortel
Module: SSG-5000-CHASSIS-MIB
Vendor: Nortel Networks
Module: SSG-5000-CHASSIS-MIB (SSG-5000-CHASSIS-MIB.my)
Type: TABULAR
Access: read-only
Syntax: Gauge32
Automatically extracted from www.mibdepot.com
ssg5000ETHPortSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295)." ::= { ssg5000ETHPortStatEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.1 | ssg5000ETHPortIndex | 0 | 0 | The ETH port index. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.2 | ssg5000ETHPortAdminStatus | 0 | 0 | The Administrative status of the ETH port. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.3 | ssg5000ETHPortOperStatus | 0 | 0 | The Operational status of the ETH port. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.4 | ssg5000ETHPortAlarms | 0 | 0 | The bitmask value that ETH port's alarms, bitmap [32,... ,9,8,7,6,5,4,3,2,1], refer ETHPortAlarmType for alarm acronyms.… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.5 | ssg5000ETHPortMtu | 0 | 0 | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.7 | ssg5000ETHPortPhysAddress | 0 | 0 | The ethernet interface's MAC address. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.8 | ssg5000ETHPortLastChange | 0 | 0 | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior t… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.9 | ssg5000ETHPortInOctets | 0 | 0 | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.10 | ssg5000ETHPortInUcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast … |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.11 | ssg5000ETHPortInNUcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast addr… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.12 | ssg5000ETHPortInDiscards | 0 | 0 | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being de… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.13 | ssg5000ETHPortInErrors | 0 | 0 | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.14 | ssg5000ETHPortInUnknownProtos | 0 | 0 | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.15 | ssg5000ETHPortInFcsErrors | 0 | 0 | The total number of packets received with frame checksum errors. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.16 | ssg5000ETHPortOutOctets | 0 | 0 | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.17 | ssg5000ETHPortOutUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or … |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.18 | ssg5000ETHPortOutNUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broa… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.19 | ssg5000ETHPortOutDiscards | 0 | 0 | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being t… |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.20 | ssg5000ETHPortOutErrors | 0 | 0 | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.21 | ssg5000ETHPortOutQLen | 0 | 0 | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.22 | ssg5000ETHPortAdminPhysMode | 0 | 0 | This value indicates the administratively configured physical mode of the local interface. |
| 1.3.6.1.4.1.3199.10.28.1.1.5.1.23 | ssg5000ETHPortOperPhysMode | 0 | 0 | This value indicates the current operational physical mode of the local interface. |