This persistent variable controls whether the Agent will
attempt to sent a trap the MIB II 'coldStart' trap whenever
the Network Management Unit, or NMU, resets or is powered
up.
The 'coldStart' trap is defined in RFC 1215, but offers no
control for enabling or disabling. This MIB represents an
extension to this definition for the purpose of allowing
all traps to be selectively enabled or disabled. This
coldStart trap has no variable bindings. The NMU does not
support the 'warmStart' trap, since it does not
differentiate the type of startup.
'enabled' allows the SNMP Agent to attempt to send the
coldStart trap, provided the other checks describe below
do not prohibit this trap from transmission.
'disabled' disallows the SNMP Agent from attempting to send
the coldStart trap, thus 'filtering' this trap from
transmission'. In this case, 'trapFilteredSpecific' will
be incremented.
This MIB variable is the first of four checks that the NMU
Agent uses to filter traps, based upon 1) a specific
enable or disable control variable; 2) 'trapControl' which
offers a gross on/off/limit control; 3) 'trapMgrTable'
with 'trapMgrControl' and 'trapMgrAddress' which filters
whether standard traps (such as this coldStart) and/or
enterprise traps are sent to each specific trap manager;
and 4) 'trapSeverityFilter' which filters traps according
to a controlling severity level (In the case of coldStart,
there is no associated severity level, so this final
filter does not apply).
Whenever any of these trap filters cause a trap to be
filtered, the corresponding MIB statistic is incremented.
These statistics are 'trapFilteredSpecific',
'trapFilteredControl', 'trapFilteredManager', and
'trapFilteredSeverity' .
See the MIB descriptions for any of these above variables
for details.
Parsed from file WESTERN-MULTIPLEX-MIB.mib
Module: WESTERN-MULTIPLEX-MIB
Vendor: Western Multiplex
Module: WESTERN-MULTIPLEX-MIB
[Automatically extracted from oidview.com]
trapColdStartControl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This persistent variable controls whether the Agent will attempt to sent a trap the MIB II 'coldStart' trap whenever the Network Management Unit, or NMU, resets or is powered up. The 'coldStart' trap is defined in RFC 1215, but offers no control for enabling or disabling. This MIB represents an extension to this definition for the purpose of allowing all traps to be selectively enabled or disabled. This coldStart trap has no variable bindings. The NMU does not support the 'warmStart' trap, since it does not differentiate the type of startup. 'enabled' allows the SNMP Agent to attempt to send the coldStart trap, provided the other checks describe below do not prohibit this trap from transmission. 'disabled' disallows the SNMP Agent from attempting to send the coldStart trap, thus 'filtering' this trap from transmission'. In this case, 'trapFilteredSpecific' will be incremented. This MIB variable is the first of four checks that the NMU Agent uses to filter traps, based upon 1) a specific enable or disable control variable; 2) 'trapControl' which offers a gross on/off/limit control; 3) 'trapMgrTable' with 'trapMgrControl' and 'trapMgrAddress' which filters whether standard traps (such as this coldStart) and/or enterprise traps are sent to each specific trap manager; and 4) 'trapSeverityFilter' which filters traps according to a controlling severity level (In the case of coldStart, there is no associated severity level, so this final filter does not apply). Whenever any of these trap filters cause a trap to be filtered, the corresponding MIB statistic is incremented. These statistics are 'trapFilteredSpecific', 'trapFilteredControl', 'trapFilteredManager', and 'trapFilteredSeverity' . See the MIB descriptions for any of these above variables for details." ::= { trap 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3727.20.10.5.1 | trapControl | 0 | 0 | This persistent variable controls the generation of SNMP traps by the Agent within the NMU of the radio. 'disabled' forces the Ag… |
| 1.3.6.1.4.1.3727.20.10.5.2 | trapClearDate | 0 | 0 | The SNMP user writing any value to this variable, causes the following variables to be modified: 1) 'trapMgrCounter' variables of… |
| 1.3.6.1.4.1.3727.20.10.5.3 | trapMgrTable | 1 | 5 | This table contains a list of trap managers that the Agent must attempt to sent its traps, assuming other controls (or filters) a… |
| 1.3.6.1.4.1.3727.20.10.5.4 | trapFlow | 0 | 0 | This variable indicates whether the Agent has its ability to send SNMP traps limited because it has sent 'trapMaxPerWindow' traps… |
| 1.3.6.1.4.1.3727.20.10.5.5 | trapLastTimestamp | 0 | 0 | This variable contains the Date and Time that the Agent attempted to send the last trap. (The time the Agent formatted the SNMP t… |
| 1.3.6.1.4.1.3727.20.10.5.6 | trapWindowPeriod | 0 | 0 | This persistent variable indicates the time period in minutes that is used by the feedback/pin trap limiting algorithm as specifi… |
| 1.3.6.1.4.1.3727.20.10.5.7 | trapMaxPerWindow | 0 | 0 | This persistent variable indicates the maximum number of traps that can occur and be sent during the time period specified by 'tr… |
| 1.3.6.1.4.1.3727.20.10.5.10 | trapSequenceClearDate | 0 | 0 | The SNMP user writing any value to this variable, causes the following variables to be modified: 1) 'trapSequenceNumber' variable… |
| 1.3.6.1.4.1.3727.20.10.5.11 | trapSequenceNumber | 0 | 0 | This persistent variable increments every time an enterprise or standard trap (coldStart, LinkUp, etc.) is generated by the Netwo… |
| 1.3.6.1.4.1.3727.20.10.5.12 | trapSeverityFilter | 0 | 0 | This persistent variable indicates the desired severity level for sending a generated SNMP trap based upon this severity level. T… |
| 1.3.6.1.4.1.3727.20.10.5.13 | trapCommunity | 0 | 0 | This persistent variable identifies the community string to be used when sending traps to any of the trap managers specified in '… |
| 1.3.6.1.4.1.3727.20.10.5.18 | trapFilteredSpecific | 0 | 0 | This variable counts the number of occurrences of events that have an associated SNMP trap, and no trap was sent due to a trap fi… |
| 1.3.6.1.4.1.3727.20.10.5.19 | trapFilteredControl | 0 | 0 | This variable counts the number of occurrences of events that have an associated SNMP trap, and no trap was sent due to the 'trap… |
| 1.3.6.1.4.1.3727.20.10.5.20 | trapFilteredManager | 0 | 0 | This variable counts the number of occurrences of events that have an associated SNMP trap, and no trap was sent due to the 'trap… |
| 1.3.6.1.4.1.3727.20.10.5.21 | trapFilteredSeverity | 0 | 0 | This variable counts the number of occurrences of events that have an associated SNMP trap, and no trap was sent due to the trap … |
| 1.3.6.1.4.1.3727.20.10.5.23 | trapLinkDownControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to sent a trap the MIB II 'linkDown' trap whenever the Network M… |
| 1.3.6.1.4.1.3727.20.10.5.24 | trapLinkUpControl | 0 | 0 | This persistent variable controls whether the Agent will attempt to sent a trap the MIB II 'linkUp' trap whenever the Network Man… |