This non-persistent variable contains the current state of
the loopback mode for the radio side of the T1 channel
of the radio.
'enabled' reconfigures the T1 data path of the radio.
The data path is set to take data received from the radio
side of the system and send it back out the transmitter of
the radio.
'disabled' turns off the T1 channel radio loopback
mode, and allows T1 data received from the radio side of
the system to be presented to its Line Interface Unit, and
T1 data received from the Line Interface Unit to be
transmitted by the radio.
The default value for this variable is disabled(2).
Parsed from file WESTERN-MULTIPLEX-RAD10006-MIB.mib
Module: WESTERN-MULTIPLEX-RAD10006-MIB
Vendor: Western Multiplex
Module: WESTERN-MULTIPLEX-RAD10006-MIB
[Automatically extracted from oidview.com]
cnfgT1NearEndRadioLoopback OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This non-persistent variable contains the current state of the loopback mode for the radio side of the T1 channel of the radio. 'enabled' reconfigures the T1 data path of the radio. The data path is set to take data received from the radio side of the system and send it back out the transmitter of the radio. 'disabled' turns off the T1 channel radio loopback mode, and allows T1 data received from the radio side of the system to be presented to its Line Interface Unit, and T1 data received from the Line Interface Unit to be transmitted by the radio. The default value for this variable is disabled(2)." ::= { config 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3727.20.20.1.1 | cnfgT1LineCode | 0 | 0 | This persistent variable contains the current T1 line encoding/decoding method. 'B8ZS' selects the Bipolar With 8-bit Zero Substi… |
| 1.3.6.1.4.1.3727.20.20.1.2 | cnfgT1LineBuildOut | 0 | 0 | This persistent variable contains the current T1 Line Build Out configuration for the radio. For DSX-1 applications, line lengths… |
| 1.3.6.1.4.1.3727.20.20.1.4 | cnfgT1FarEndRadioLoopback | 0 | 0 | This non-persistent variable contains the current state of the loopback mode for the radio side of the T1 channel of the remote r… |
| 1.3.6.1.4.1.3727.20.20.1.5 | cnfgT1InputAlarm | 0 | 0 | This non-persistent variable contains the configuration setting of the T1 channel input. It allows the SNMP user to control T1 ch… |
| 1.3.6.1.4.1.3727.20.20.1.6 | cnfgAIS | 0 | 0 | This non-persistent variable contains the configuration setting of the AIS output. It allows the SNMP user to control AIS output.… |
| 1.3.6.1.4.1.3727.20.20.1.7 | cnfgOrderwireAddr | 0 | 0 | This persistent variable contains the current number of the two-digit engineering orderwire (EOW) phone number of the handset con… |
| 1.3.6.1.4.1.3727.20.20.1.8 | cnfgLinkSecurityCode | 0 | 0 | This persistent variable contains the current number of the 12-byte security code. It allows the SNMP user to read and set the li… |
| 1.3.6.1.4.1.3727.20.20.1.9 | cnfgLearningFilter | 0 | 0 | This persistent variable configures the learning filter. 'disabled' turns off the learning filter. 'enabled' turns on the learnin… |
| 1.3.6.1.4.1.3727.20.20.1.10 | cnfgFiberOpticInterface | 0 | 0 | This persistent variable configures the fiber interface. 'disabled' turns off the fiber interface. 'enabled' turns on the fiber i… |
| 1.3.6.1.4.1.3727.20.20.1.11 | cnfgEthernetDuplex | 0 | 0 | This persistent variable contains the current configuration of the ethernet communication mode. 'full-duplex' indicates ethernet … |
| 1.3.6.1.4.1.3727.20.20.1.12 | cnfgDataRate | 0 | 0 | This persistent variable contains the current configuration of the data rate. 'full-duplex-45-MB' indicates 45 MB data rate with … |
| 1.3.6.1.4.1.3727.20.20.1.13 | cnfgInterfaceType | 0 | 0 | This persistent variable contains the current configuration of interface type. 't1-100BaseT' indicates 100BaseT and a T1 channel.… |
| 1.3.6.1.4.1.3727.20.20.1.14 | cnfgIDUSWVersion | 0 | 0 | This persistent variable contains the current number of the 4-byte IDU software Version. There is no default value for this varia… |
| 1.3.6.1.4.1.3727.20.20.1.15 | cnfgNMUSWVersion | 0 | 0 | This persistent variable contains the current number of the 4-byte NMU software Version. There is no default value for this varia… |