Description 1
Used to turn oled display On or Off displayOff (1) to turn dispaly OFF. displayOn (2) to turn dispaly ON
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.38446.1.2.2.1.5
Used to turn oled display On or Off displayOff (1) to turn dispaly OFF. displayOn (2) to turn dispaly ON
Identification
{1 3 6 1 4 1 38446 1 2 2 1 5}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | displayOff | 1 |
| 2 | displayOn | 1 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ENLOGIC-PDU-MIB, the row index pduUnitConfigIndex is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.38446.1.2.2.1.5.<pduUnitConfigIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: pduUnitConfigIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.38446.1.2.2.1.5
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
pduUnitConfigOledDisplayControl OBJECT-TYPE
SYNTAX INTEGER {
displayOff (1),
displayOn (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to turn oled display On or Off
displayOff (1) to turn dispaly OFF.
displayOn (2) to turn dispaly ON"
::= { pduUnitConfigEntry 5 }pduUnitConfigColdstartDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time, specified in seconds, between when power
is provided to the PDU and when the PDU start providing basic master
power to the outlets"
::= { pduUnitConfigEntry 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Used to turn oled display On or Off displayOff (1) to turn dispaly OFF. displayOn (2) to turn dispaly ON
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
The amount of time, specified in seconds, between when power is provided to the PDU and when the PDU start providing basic master power to the outlets
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: pduUnitConfigOledDisplayControl
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"pduUnitConfigOledDisplayControl",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"displayOff",
"(",
"1",
")",
",",
"displayOn",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Used to turn oled display On or Off displayOff (1) to turn dispaly OFF. displayOn (2) to turn dispaly ON\"",
"::=",
"{",
"pduUnitConfigEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"displayOff",
1
],
[
"displayOn",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Used to turn oled display On or Off displayOff (1) to turn dispaly OFF. displayOn (2) to turn dispaly ON"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: ENLOGIC-PDU2-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'Integer32', 'Unsigned32', 'IpAddress'], 'RFC1213-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: pduUnitConfigColdstartDelay
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"pduUnitConfigColdstartDelay",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"3600",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The amount of time, specified in seconds, between when power is provided to the PDU and when the PDU start providing basic master power to the outlets\"",
"::=",
"{",
"pduUnitConfigEntry",
"5",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
3600
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The amount of time, specified in seconds, between when power is provided to the PDU and when the PDU start providing basic master power to the outlets"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: ENLOGIC-PDU-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'Integer32', 'Unsigned32', 'IpAddress'], 'RFC1213-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.38446.1.2.2.1.1 | pduUnitConfigIndex | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.2 | pduUnitConfigName | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.3 | pduUnitConfigLocation | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.4 | pduUnitConfigDisplayOrientation | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.6 | pduUnitConfigGlobalOutletStateOnStartup, pduUnitConfigColdstartDelay | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.7 | pduUnitConfigLowerCriticalThreshold, pduUnitConfigGlobalOutletStateOnStartup | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.8 | pduUnitConfigLowerWarningThreshold, pduUnitConfigLowerCriticalThreshold | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.9 | pduUnitConfigUpperCriticalThreshold, pduUnitConfigLowerWarningThreshold | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.10 | pduUnitConfigUpperWarningThreshold, pduUnitConfigUpperCriticalThreshold | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.11 | pduUnitConfigAlarmResetThreshold, pduUnitConfigUpperWarningThreshold | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.12 | pduUnitConfigAlarmStateChangeDelay, pduUnitConfigAlarmResetThreshold | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.13 | pduUnitConfigEnabledThresholds, pduUnitConfigAlarmStateChangeDelay | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.14 | pduUnitConfigPeakPowerReset, pduUnitConfigEnabledThresholds | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.15 | pduUnitConfigEnergyReset, pduUnitConfigPeakPowerReset | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.16 | pduUnitConfigOutletPeakPowerReset, pduUnitConfigEnergyReset | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.17 | pduUnitConfigOutletEnergyReset, pduUnitConfigOutletPeakPowerReset | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.18 | pduUnitConfigUsb, pduUnitConfigOutletEnergyReset | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.19 | pduUnitConfigSsh, pduUnitConfigUsb | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.20 | pduUnitConfigResetNetworkManagementCard, pduUnitConfigSsh | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.21 | pduUnitConfigDaisyChainState, pduUnitConfigResetNetworkManagementCard | 0 | 0 | |
| 1.3.6.1.4.1.38446.1.2.2.1.22 | pduUnitConfigDaisyChainState | 0 | 0 |