A unique value for each X.25 subnetwork entity in the
chassis. The value of this object matches the value of the
index of the corresponding X.25 subnetwork entity entry in
the entity table of the chassis MIB.
Parsed from file UX25.MIB.txt
Company: cai
Module: UX25-MIB
Vendor: 3Com
Module: UX25-MIB (UX25.MIB)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ux25AdmnPacketIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB." ::= { ux25AdmnPacketEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.10.3.1.2 | ux25AdmnPktSequencing | 0 | 0 | Indicates whether modulo 8 or 128 sequence numbering operates on the network. Default=pktSeq8(16). |
| 1.3.6.1.4.1.429.1.10.3.1.3 | ux25AdmnLocMaxPktSize | 0 | 0 | Maximum acceptable size of packets in the local-to-remote direction. On an incoming call, a value for the packet size parameter … |
| 1.3.6.1.4.1.429.1.10.3.1.4 | ux25AdmnRemMaxPktSize | 0 | 0 | Maximum acceptable size of packets in the remote-to-local direction. On an incoming call, a value for the packet size parameter … |
| 1.3.6.1.4.1.429.1.10.3.1.5 | ux25AdmnLocDefPktSize | 0 | 0 | Specifies the value of the default packet size for the direction local-to-remote, which may be nonstandard, provided the value is… |
| 1.3.6.1.4.1.429.1.10.3.1.6 | ux25AdmnRemDefPktSize | 0 | 0 | Specifies the value of the default packet size for the direction remote-to-local, which may be nonstandard, provided the value is… |
| 1.3.6.1.4.1.429.1.10.3.1.7 | ux25AdmnLocMaxWinSize | 0 | 0 | Specifies the maximum local window size. NOTE: 127 allowed only for modulo 128 networks. Default=7. |
| 1.3.6.1.4.1.429.1.10.3.1.8 | ux25AdmnRemMaxWinSize | 0 | 0 | Specifies the maximum remote window size. NOTE: 127 allowed only for modulo 128 networks. Default=7. |
| 1.3.6.1.4.1.429.1.10.3.1.9 | ux25AdmnLocDefWinSize | 0 | 0 | Specifies the value of the default window size, which may be nonstandard, provided the value is agreed on by all parties on the L… |
| 1.3.6.1.4.1.429.1.10.3.1.10 | ux25AdmnRemDefWinSize | 0 | 0 | Specifies the value of the default window size, which may be nonstandard, provided the value is agreed on by all parties on the L… |
| 1.3.6.1.4.1.429.1.10.3.1.11 | ux25AdmnMaxNSDULimit | 0 | 0 | The default maximum length beyond which concatenation is stopped and data currently held is passed to the Network Service user. De… |
| 1.3.6.1.4.1.429.1.10.3.1.12 | ux25AdmnAccNoDiagnostic | 0 | 0 | Allow the omission of the diagnostic byte in incoming RESTART, CLEAR and RESET INDICATION packets. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.13 | ux25AdmnUseDiagnosticPacket | 0 | 0 | Use diagnostic packets. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.14 | ux25AdmnItutClearLen | 0 | 0 | Restrict the length of a CLEAR INDICATION to 5 bytes and a CLEAR CONFIRM to 3 bytes. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.15 | ux25AdmnBarDiagnosticPacket | 0 | 0 | Bar diagnostic packets. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.16 | ux25AdmnDiscNzDiagnostic | 0 | 0 | Discard all diagnostic packets on a non-zero LCN. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.17 | ux25AdmnAcceptHexAdd | 0 | 0 | Allow DTE addresses to contain hexadecimal digits. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.18 | ux25AdmnBarNonPrivilegeListen | 0 | 0 | Disallow a non-privileged user (i.e without superuser privilege) from listening for incoming calls. Default=enable(2). |
| 1.3.6.1.4.1.429.1.10.3.1.19 | ux25AdmnIntlAddrRecognition | 0 | 0 | Determine whether outgoing international calls are to be accepted. The values and their interpretation are: 1 - International call… |
| 1.3.6.1.4.1.429.1.10.3.1.20 | ux25AdmnDnic | 0 | 0 | This field contains the first four digits of DNIC and is only used when ux25AdmnIntlAddrRecognition is set to examineDnic(2). Not… |
| 1.3.6.1.4.1.429.1.10.3.1.21 | ux25AdmnIntlPrioritized | 0 | 0 | Determine whether some prioritizing method is to used for international calls and is used in conjuction with ux25AdmnPrtyEncodeCt… |
| 1.3.6.1.4.1.429.1.10.3.1.22 | ux25AdmnPrtyEncodeCtrl | 0 | 0 | Describes how the priority request is to be encoded for this PSDN. Default=x2588(1). |
| 1.3.6.1.4.1.429.1.10.3.1.23 | ux25AdmnPrtyPktForcedVal | 0 | 0 | If this entry is other than prioPktSz1(1) all priority call requests and incoming calls should have the associated packet size pa… |
| 1.3.6.1.4.1.429.1.10.3.1.24 | ux25AdmnSrcAddrCtrl | 0 | 0 | Provide a means to override or set the calling address in outgoing call requests for this PSDN. Default=noSaCntrl(1). |
| 1.3.6.1.4.1.429.1.10.3.1.25 | ux25AdmnDbitInAccept | 0 | 0 | Defines the action to take when a Call Accept is received with the D-bit set and there is no local D-bit support. Default=clearCal… |
| 1.3.6.1.4.1.429.1.10.3.1.26 | ux25AdmnDbitOutAccept | 0 | 0 | Defines the action to take when the remote user sends a Call Accept with the D-bit set when the local user did not request use of… |
| 1.3.6.1.4.1.429.1.10.3.1.27 | ux25AdmnDbitInData | 0 | 0 | Defines the action to take when a data packet is received with the D-bit set and the local user did not request use of the D-bit.… |
| 1.3.6.1.4.1.429.1.10.3.1.28 | ux25AdmnDbitOutData | 0 | 0 | Defines the action when the local user send a data packet with the D-bit set, but the remote party has not indicated D-bit suppor… |