Discard all diagnostic packets on a non-zero
LCN.
Default=disable(1).
Parsed from file UX25.MIB.txt
Company: cai
Module: UX25-MIB
Vendor: 3Com
Module: UX25-MIB (UX25.MIB)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ux25AdmnDiscNzDiagnostic OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Discard all diagnostic packets on a non-zero LCN. Default=disable(1)." ::= { ux25AdmnPacketEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.10.3.1.1 | ux25AdmnPacketIndex | 0 | 0 | A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the co… |
| 1.3.6.1.4.1.429.1.10.3.1.2 | ux25AdmnPktSequencing | 0 | 0 | Indicates whether modulo 8 or 128 sequence numbering operates on the network. Default=pktSeq8(16). |
| 1.3.6.1.4.1.429.1.10.3.1.3 | ux25AdmnLocMaxPktSize | 0 | 0 | Maximum acceptable size of packets in the local-to-remote direction. On an incoming call, a value for the packet size parameter … |
| 1.3.6.1.4.1.429.1.10.3.1.4 | ux25AdmnRemMaxPktSize | 0 | 0 | Maximum acceptable size of packets in the remote-to-local direction. On an incoming call, a value for the packet size parameter … |
| 1.3.6.1.4.1.429.1.10.3.1.5 | ux25AdmnLocDefPktSize | 0 | 0 | Specifies the value of the default packet size for the direction local-to-remote, which may be nonstandard, provided the value is… |
| 1.3.6.1.4.1.429.1.10.3.1.6 | ux25AdmnRemDefPktSize | 0 | 0 | Specifies the value of the default packet size for the direction remote-to-local, which may be nonstandard, provided the value is… |
| 1.3.6.1.4.1.429.1.10.3.1.7 | ux25AdmnLocMaxWinSize | 0 | 0 | Specifies the maximum local window size. NOTE: 127 allowed only for modulo 128 networks. Default=7. |
| 1.3.6.1.4.1.429.1.10.3.1.8 | ux25AdmnRemMaxWinSize | 0 | 0 | Specifies the maximum remote window size. NOTE: 127 allowed only for modulo 128 networks. Default=7. |
| 1.3.6.1.4.1.429.1.10.3.1.9 | ux25AdmnLocDefWinSize | 0 | 0 | Specifies the value of the default window size, which may be nonstandard, provided the value is agreed on by all parties on the L… |
| 1.3.6.1.4.1.429.1.10.3.1.10 | ux25AdmnRemDefWinSize | 0 | 0 | Specifies the value of the default window size, which may be nonstandard, provided the value is agreed on by all parties on the L… |
| 1.3.6.1.4.1.429.1.10.3.1.11 | ux25AdmnMaxNSDULimit | 0 | 0 | The default maximum length beyond which concatenation is stopped and data currently held is passed to the Network Service user. De… |
| 1.3.6.1.4.1.429.1.10.3.1.12 | ux25AdmnAccNoDiagnostic | 0 | 0 | Allow the omission of the diagnostic byte in incoming RESTART, CLEAR and RESET INDICATION packets. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.13 | ux25AdmnUseDiagnosticPacket | 0 | 0 | Use diagnostic packets. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.14 | ux25AdmnItutClearLen | 0 | 0 | Restrict the length of a CLEAR INDICATION to 5 bytes and a CLEAR CONFIRM to 3 bytes. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.15 | ux25AdmnBarDiagnosticPacket | 0 | 0 | Bar diagnostic packets. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.17 | ux25AdmnAcceptHexAdd | 0 | 0 | Allow DTE addresses to contain hexadecimal digits. Default=disable(1). |
| 1.3.6.1.4.1.429.1.10.3.1.18 | ux25AdmnBarNonPrivilegeListen | 0 | 0 | Disallow a non-privileged user (i.e without superuser privilege) from listening for incoming calls. Default=enable(2). |
| 1.3.6.1.4.1.429.1.10.3.1.19 | ux25AdmnIntlAddrRecognition | 0 | 0 | Determine whether outgoing international calls are to be accepted. The values and their interpretation are: 1 - International call… |
| 1.3.6.1.4.1.429.1.10.3.1.20 | ux25AdmnDnic | 0 | 0 | This field contains the first four digits of DNIC and is only used when ux25AdmnIntlAddrRecognition is set to examineDnic(2). Not… |
| 1.3.6.1.4.1.429.1.10.3.1.21 | ux25AdmnIntlPrioritized | 0 | 0 | Determine whether some prioritizing method is to used for international calls and is used in conjuction with ux25AdmnPrtyEncodeCt… |
| 1.3.6.1.4.1.429.1.10.3.1.22 | ux25AdmnPrtyEncodeCtrl | 0 | 0 | Describes how the priority request is to be encoded for this PSDN. Default=x2588(1). |
| 1.3.6.1.4.1.429.1.10.3.1.23 | ux25AdmnPrtyPktForcedVal | 0 | 0 | If this entry is other than prioPktSz1(1) all priority call requests and incoming calls should have the associated packet size pa… |
| 1.3.6.1.4.1.429.1.10.3.1.24 | ux25AdmnSrcAddrCtrl | 0 | 0 | Provide a means to override or set the calling address in outgoing call requests for this PSDN. Default=noSaCntrl(1). |
| 1.3.6.1.4.1.429.1.10.3.1.25 | ux25AdmnDbitInAccept | 0 | 0 | Defines the action to take when a Call Accept is received with the D-bit set and there is no local D-bit support. Default=clearCal… |
| 1.3.6.1.4.1.429.1.10.3.1.26 | ux25AdmnDbitOutAccept | 0 | 0 | Defines the action to take when the remote user sends a Call Accept with the D-bit set when the local user did not request use of… |
| 1.3.6.1.4.1.429.1.10.3.1.27 | ux25AdmnDbitInData | 0 | 0 | Defines the action to take when a data packet is received with the D-bit set and the local user did not request use of the D-bit.… |
| 1.3.6.1.4.1.429.1.10.3.1.28 | ux25AdmnDbitOutData | 0 | 0 | Defines the action when the local user send a data packet with the D-bit set, but the remote party has not indicated D-bit suppor… |