The index which uniquely identifies the modem to which this
entry is applicable. The value corresponds to the value of
the index to the entity table in the chassis MIB that
corresponds to the same modem.
Parsed from file IMDM-MIB.mib.txt
Company: None
Module: IMDM-MIB
The index which uniquely identifies the modem to which this
entry is applicable. The value corresponds to the value of
the index to the entity table in the chassis MIB that
corresponds to the same modem.
Parsed from file IMDM-MIB.mib
Module: IMDM-MIB
Vendor: UTStarcom Incorporated
Module: IMDM-MIB
[Automatically extracted from oidview.com]
imdmCcIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index to the entity table in the chassis MIB that corresponds to the same modem." ::= { imdmCcEntry 1 }
imdmCcIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index to the entity table in the chassis MIB that corresponds to the same modem." ::= { imdmCcEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.19.1.1.1.2 | imdmCcRateAdapV110 | 0 | 0 | This object enables V110 rate adaption corresponds to S register S67 bit 0. Default = enable(2). |
| 1.3.6.1.4.1.429.1.19.1.1.1.3 | imdmCcFixedNtwkRate | 0 | 0 | This object sets the fixed network rate. This object correspond to S register S67 bit 1. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.4 | imdmCcNetworkRate | 0 | 0 | This object sets the Network rate speed. This object corresponds to the modem S register S67 bit 2. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.5 | imdmCcBcLinkDly | 0 | 0 | This object enable a 45 - 65 second link delay. This object corresponds to the S register S67 bit 4. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.6 | imdmCcAnlgOvrDig | 0 | 0 | This object is used to set S register S68 bit 0 which, does not allow analog calls over digital data connection. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.7 | imdmCcAsyncPPP | 0 | 0 | This object is used to disable/enable async PPP/ sync PPP conversion. This object corresponds to S register S68 bit 2. Default = … |
| 1.3.6.1.4.1.429.1.19.1.1.1.8 | imdmCcX75 | 0 | 0 | This object is used to disable/enable X75. This object corresponds to S register S68 bit 3. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.9 | imdmCcStarV2 | 0 | 0 | This object is used to set the data mode of the modem and is equivalent to *V2 = x AT command. Default =1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.10 | imdmCcStarU1 | 0 | 0 | This object is used to set the originate HDLC protocols of the modem and is equivalent to *U1 = x AT command. Default =2 |
| 1.3.6.1.4.1.429.1.19.1.1.1.11 | imdmCcStarU2 | 0 | 0 | This object is used to set the originate Non-HDLC protocols of the modem and is equivalent to *U2 = x AT command. Default =1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.12 | imdmCcStarU3 | 0 | 0 | This object is used to set the originate Analog modem/fax data mode of the modem and is equivalent to *U3 = x AT command. Default… |
| 1.3.6.1.4.1.429.1.19.1.1.1.13 | imdmCcV120 | 0 | 0 | This Object is used to Enable/Disable V120. This Object corresponds to S register 68 bit 4 default=1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.14 | imdmCcFrameSize | 0 | 0 | This Object is used to set the Frame size for X75. Default = 2048 |
| 1.3.6.1.4.1.429.1.19.1.1.1.15 | imdmCcWindowSize | 0 | 0 | This Object is used to set the Window Size of X75 default=2 |