This object is used to set S register S68 bit 0 which, does
not allow analog calls over digital data connection.
Default = 1
Parsed from file IMDM-MIB.mib.txt
Company: None
Module: IMDM-MIB
This object is used to set S register S68 bit 0 which, does
not allow analog calls over digital data connection.
Default = 1
Parsed from file IMDM-MIB.mib
Module: IMDM-MIB
Vendor: UTStarcom Incorporated
Module: IMDM-MIB
[Automatically extracted from oidview.com]
imdmCcAnlgOvrDig OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to set S register S68 bit 0 which, does not allow analog calls over digital data connection. Default = 1" ::= { imdmCcEntry 6 }
imdmCcAnlgOvrDig OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to set S register S68 bit 0 which, does not allow analog calls over digital data connection. Default = 1" ::= { imdmCcEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.19.1.1.1.1 | imdmCcIndex | 0 | 0 | The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index… |
| 1.3.6.1.4.1.429.1.19.1.1.1.2 | imdmCcRateAdapV110 | 0 | 0 | This object enables V110 rate adaption corresponds to S register S67 bit 0. Default = enable(2). |
| 1.3.6.1.4.1.429.1.19.1.1.1.3 | imdmCcFixedNtwkRate | 0 | 0 | This object sets the fixed network rate. This object correspond to S register S67 bit 1. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.4 | imdmCcNetworkRate | 0 | 0 | This object sets the Network rate speed. This object corresponds to the modem S register S67 bit 2. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.5 | imdmCcBcLinkDly | 0 | 0 | This object enable a 45 - 65 second link delay. This object corresponds to the S register S67 bit 4. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.7 | imdmCcAsyncPPP | 0 | 0 | This object is used to disable/enable async PPP/ sync PPP conversion. This object corresponds to S register S68 bit 2. Default = … |
| 1.3.6.1.4.1.429.1.19.1.1.1.8 | imdmCcX75 | 0 | 0 | This object is used to disable/enable X75. This object corresponds to S register S68 bit 3. Default = 1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.9 | imdmCcStarV2 | 0 | 0 | This object is used to set the data mode of the modem and is equivalent to *V2 = x AT command. Default =1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.10 | imdmCcStarU1 | 0 | 0 | This object is used to set the originate HDLC protocols of the modem and is equivalent to *U1 = x AT command. Default =2 |
| 1.3.6.1.4.1.429.1.19.1.1.1.11 | imdmCcStarU2 | 0 | 0 | This object is used to set the originate Non-HDLC protocols of the modem and is equivalent to *U2 = x AT command. Default =1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.12 | imdmCcStarU3 | 0 | 0 | This object is used to set the originate Analog modem/fax data mode of the modem and is equivalent to *U3 = x AT command. Default… |
| 1.3.6.1.4.1.429.1.19.1.1.1.13 | imdmCcV120 | 0 | 0 | This Object is used to Enable/Disable V120. This Object corresponds to S register 68 bit 4 default=1 |
| 1.3.6.1.4.1.429.1.19.1.1.1.14 | imdmCcFrameSize | 0 | 0 | This Object is used to set the Frame size for X75. Default = 2048 |
| 1.3.6.1.4.1.429.1.19.1.1.1.15 | imdmCcWindowSize | 0 | 0 | This Object is used to set the Window Size of X75 default=2 |