Enable the generation of an SNMP trap upon detection of
loss of signal on the specified DS1.
Parsed from file RDS1.MIB.txt
Company: cai
Module: RDS1-MIB
Vendor: 3Com
Module: RDS1-MIB (RDS1.MIB)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
usrds1EventLossOfSignal OBJECT-TYPE SYNTAX INTEGER{ enableTrap(1), disableAll(2), enableLog(3), enableAll(4) } ACCESS read-write STATUS optional DESCRIPTION "Enable the generation of an SNMP trap upon detection of loss of signal on the specified DS1." ::= { usrds1EventCfgEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.27.4.1.1 | usrds1EventIndex | 0 | 0 | A unique value for each CSU in the chassis. The value of usrds1EventIndex matches the value of the index for the corresponding N… |
| 1.3.6.1.4.1.429.1.27.4.1.2 | usrds1EventYellowAlarm | 0 | 0 | Enable the generation of an SNMP trap upon detection of a yellow alarm condition on the specified DS1. |
| 1.3.6.1.4.1.429.1.27.4.1.3 | usrds1EventRedAlarm | 0 | 0 | Enable the generation of an SNMP trap upon detection of a red alarm condition on the specified DS1. |
| 1.3.6.1.4.1.429.1.27.4.1.5 | usrds1EventAlarmIndSignal | 0 | 0 | Enable the generation of an SNMP trap upon detection of an alarm indication signal (AIS) on the specified DS1. |
| 1.3.6.1.4.1.429.1.27.4.1.6 | usrds1EventYellowAlarmClr | 0 | 0 | Enable the generation of an SNMP trap upon detection of a yellow alarm condition being cleared on the specified DS1. |
| 1.3.6.1.4.1.429.1.27.4.1.7 | usrds1EventRedAlarmClr | 0 | 0 | Enable the generation of an SNMP trap upon detection of a red alarm condition being cleared on the specified DS1. |
| 1.3.6.1.4.1.429.1.27.4.1.8 | usrds1EventLossOfSgnlClr | 0 | 0 | Enable the generation of an SNMP trap upon detection of loss of signal condition being cleared on the specified DS1. |
| 1.3.6.1.4.1.429.1.27.4.1.9 | usrds1EventAlrmIndSgnlClr | 0 | 0 | Enable the generation of an SNMP trap upon detection of an alarm indication signal (AIS) being cleared on the specified DS1. |
| 1.3.6.1.4.1.429.1.27.4.1.10 | usrds1EventContCrcAlrm | 0 | 0 | Enable the generation of an SNMP trap upon detection of a continuous CRC condition on the specified DS1. |
| 1.3.6.1.4.1.429.1.27.4.1.11 | usrds1EventContCrcAlrmClr | 0 | 0 | Enable the generation of an SNMP trap upon detection of the clearing of a continuous CRC condition on the specified DS1. |
| 1.3.6.1.4.1.429.1.27.4.1.12 | usrds1EventPhysStateChng | 0 | 0 | Enable the generation of an SNMP trap upon detection of a change in the physical state of the specified DS1. |
| 1.3.6.1.4.1.429.1.27.4.1.13 | usrds1EventDs0InSrvc | 0 | 0 | Enable the generation of an SNMP trap upon detection of a change in the service state of a DS0 on this span line from Out of Serv… |
| 1.3.6.1.4.1.429.1.27.4.1.14 | usrds1EventDs0OutOfSrvc | 0 | 0 | Enable the generation of an SNMP trap upon detection of a change in the service state of a DS0 on this span line from In Service … |
| 1.3.6.1.4.1.429.1.27.4.1.15 | usrds1EventDs0ServStateMt | 0 | 0 | Enable the generation of an SNMP trap when - B - channel(s), specified, change to Maintenance Service State. |
| 1.3.6.1.4.1.429.1.27.4.1.16 | usrds1EventloopBack | 0 | 0 | Enable the generation of an SNMP trap when - The span line has been looped up. Loop back has occurred on span line. |
| 1.3.6.1.4.1.429.1.27.4.1.17 | usrds1EventloopBackCleard | 0 | 0 | Enable the generation of an SNMP trap when - The span line has been looped down. Loop back has cleared on span line. |
| 1.3.6.1.4.1.429.1.27.4.1.18 | usrds1EvntelcoAbnornalRsp | 0 | 0 | Enable the generation of an SNMP trap when - NCC signal TELCO to disconnect a call, the TELCO failed to respond. |
| 1.3.6.1.4.1.429.1.27.4.1.19 | usrds1EventDchanInSrvc | 0 | 0 | Enable the generation of an SNMP trap upon detection of a change in the service state of a D channel on this span line from Out o… |
| 1.3.6.1.4.1.429.1.27.4.1.20 | usrds1DchanOutOfSrvc | 0 | 0 | Enable the generation of an SNMP trap upon detection of a change in the service state of a D channel on this span line from In se… |
| 1.3.6.1.4.1.429.1.27.4.1.21 | usrds1EventDs0InConnFail | 0 | 0 | Enable the generation of an SNMP trap upon detection of a incoming call failure at the DS0 level. Default = disableAll(2). |
| 1.3.6.1.4.1.429.1.27.4.1.22 | usrds1EventDs0OutConnFail | 0 | 0 | Enable the generation of an SNMP trap upon detection of a out going call failure at the DS0 level. Default = disableAll(2). |
| 1.3.6.1.4.1.429.1.27.4.1.23 | usrds1EventCallArrive | 0 | 0 | Enable the generation of an SNMP trap to track call arrivals. Default = disableAll(2). |
| 1.3.6.1.4.1.429.1.27.4.1.24 | usrds1EventCallTerm | 0 | 0 | Enable the generation of an SNMP trap to track normal call event. Default = disableAll(2). |
| 1.3.6.1.4.1.429.1.27.4.1.25 | usrds1EventNfasDchSwStart | 0 | 0 | Enable the generation of an SNMP trap upon detection of a begining of D-channel switch-over process. |
| 1.3.6.1.4.1.429.1.27.4.1.26 | usrds1EventNfasDchSwEnd | 0 | 0 | Enable the generation of an SNMP trap upon detection of the ending of D-channel switch-over process. |
| 1.3.6.1.4.1.429.1.27.4.1.27 | usrds1EventNfasDchSwfail | 0 | 0 | Enable the generation of an SNMP trap upon detection of a failure of the D-channel switch-over process. |
| 1.3.6.1.4.1.429.1.27.4.1.28 | usrds1EventEnterMaintMode | 0 | 0 | Enable the generation of an SNMP trap when the d-channel enters disconnect maintenance mode or enters the blue alarm maintenance … |
| 1.3.6.1.4.1.429.1.27.4.1.29 | usrds1EventExitMaintMode | 0 | 0 | Enable the generation of an SNMP trap when the d-channel exits disconnect maintenance mode or exits the blue alarm maintenance mo… |
| 1.3.6.1.4.1.429.1.27.4.1.30 | usrds1EventDs0LpBkEntered | 0 | 0 | Trap disable/enable for DS0 Loop Back entered. Default is disable. |
| 1.3.6.1.4.1.429.1.27.4.1.31 | usrds1EventDs0LpBkCleared | 0 | 0 | Trap disable/enable for DS0 Loop Back cleared. Default is disable. |