Defines how the modem determines the DTE data rate. When
set to the default, follows link rate, the modem switches
the DTE speed to match the link rate. When set to fixed,
the DTE speed remains at the default DTE data rate or the
rate of the last AT command. When set to ARQ fixed-Non ARQ
follows the dte speed remains fixed for ARQ calls and
follows the link rate for non ARQ calls.
Parsed from file MDM-MIB.mib.txt
Company: None
Module: MDM-MIB
Defines how the modem determines the DTE data rate. When
set to the default, follows link rate, the modem switches
the DTE speed to match the link rate. When set to fixed,
the DTE speed remains at the default DTE data rate or the
rate of the last AT command. When set to ARQ fixed-Non ARQ
follows the dte speed remains fixed for ARQ calls and
follows the link rate for non ARQ calls.
Parsed from file MDM-MIB.mib
Module: MDM-MIB
Vendor: UTStarcom Incorporated
Module: MDM-MIB
[Automatically extracted from oidview.com]
mdmDiDteDataRateMode OBJECT-TYPE SYNTAX INTEGER{ followsLinkRate(1), fixed(2), arqFixedNonArqFollows(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines how the modem determines the DTE data rate. When set to the default, follows link rate, the modem switches the DTE speed to match the link rate. When set to fixed, the DTE speed remains at the default DTE data rate or the rate of the last AT command. When set to ARQ fixed-Non ARQ follows the dte speed remains fixed for ARQ calls and follows the link rate for non ARQ calls." ::= { mdmDiEntry 19 }
mdmDiDteDataRateMode OBJECT-TYPE SYNTAX INTEGER{ followsLinkRate(1), fixed(2), arqFixedNonArqFollows(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines how the modem determines the DTE data rate. When set to the default, follows link rate, the modem switches the DTE speed to match the link rate. When set to fixed, the DTE speed remains at the default DTE data rate or the rate of the last AT command. When set to ARQ fixed-Non ARQ follows the dte speed remains fixed for ARQ calls and follows the link rate for non ARQ calls." ::= { mdmDiEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.6.5.1.1.1 | mdmDiIndex | 0 | 0 | The index for the DTE interface table contains the unique value associated with this modem as defined in the chassis mib entity t… |
| 1.3.6.1.4.1.429.1.6.5.1.1.2 | mdmDiEscCodeGuardTime | 0 | 0 | Duration in 50ths of a second of idle time that must precede and follow the modem's command mode escape code. Default=50. |
| 1.3.6.1.4.1.429.1.6.5.1.1.3 | mdmDiLocalEscChar | 0 | 0 | Decimal equivalent of the character that is used to escape to on-line command mode. Values between 128 and 255 disable the escap… |
| 1.3.6.1.4.1.429.1.6.5.1.1.4 | mdmDiCarriageRetChar | 0 | 0 | Specifies the decimal equivalent of the carriage return character. Default=13. |
| 1.3.6.1.4.1.429.1.6.5.1.1.5 | mdmDiLineFeedChar | 0 | 0 | Specifies the decimal equivalent of the line feed character. Default=10. |
| 1.3.6.1.4.1.429.1.6.5.1.1.6 | mdmDiBackspaceChar | 0 | 0 | Specifies the decimal equivalent of the backspace character. Default=8. |
| 1.3.6.1.4.1.429.1.6.5.1.1.7 | mdmDiDelAsBackspace | 0 | 0 | Defines functionality of the delete key. Acts either to delete the character the cursor is currently on or acts the same as the … |
| 1.3.6.1.4.1.429.1.6.5.1.1.8 | mdmDiResetOnDtrEna | 0 | 0 | When enabled, this option will cause the modem to restart when the DTR control signal drops. Default=disabled. |
| 1.3.6.1.4.1.429.1.6.5.1.1.9 | mdmDiResultCodePauseDis | 0 | 0 | When enabled, the modem pauses 250ms before transmission of any result code. Default=enable. |
| 1.3.6.1.4.1.429.1.6.5.1.1.10 | mdmDiInterbridgeEna | 0 | 0 | When enabled, the modem operates in a mode that is compatible with an 'Appletalk InterBridge Network'. Default=disabled. |
| 1.3.6.1.4.1.429.1.6.5.1.1.11 | mdmDiBreakLen | 0 | 0 | Defines the duration of break characters that are sent to the DTE in ARQ mode. Defined in 10ms increments. Default=10(100ms). |
| 1.3.6.1.4.1.429.1.6.5.1.1.12 | mdmDiXonChar | 0 | 0 | Defines the decimal equivalent of the Xon character. This character will be used when software flow control is enabled. Default… |
| 1.3.6.1.4.1.429.1.6.5.1.1.13 | mdmDiXoffChar | 0 | 0 | Defines the decimal equivalent of the xoff character. This character will be used when software flow control is enabled. Defaul… |
| 1.3.6.1.4.1.429.1.6.5.1.1.14 | mdmDiDsrPulseTime | 0 | 0 | Duration in 20 millisecond increments that the DSR signal is pulsed when the modem is configured for pulsed DSR mode. Default=150. |
| 1.3.6.1.4.1.429.1.6.5.1.1.15 | mdmDiRtsCtsDelay | 0 | 0 | Duration in 10 millisecond increments that the modem delays setting CTS after detecting the presence of RTS. Default=1. |
| 1.3.6.1.4.1.429.1.6.5.1.1.16 | mdmDiHiSpeedResCodeEna | 0 | 0 | Determines if connection establishment result codes above 9600 are sent to the DTE. Default=enable. |
| 1.3.6.1.4.1.429.1.6.5.1.1.17 | mdmDiCmdLocalEchoEna | 0 | 0 | Defines whether or not the characters transmitted by the DTE are echoed back when in command mode. Default=disabled. |
| 1.3.6.1.4.1.429.1.6.5.1.1.18 | mdmDiDataModeEchoEna | 0 | 0 | Defines whether or not the DTE's transmitted data is echoed back durring a connection(half duplex). Default=disabled. |
| 1.3.6.1.4.1.429.1.6.5.1.1.20 | mdmDiCdOverride | 0 | 0 | Defines the operation of the CD(Carrier Detect) signal. When overridden the CD signal is always asserted. Default=normal. |
| 1.3.6.1.4.1.429.1.6.5.1.1.21 | mdmDiDtrOverride | 0 | 0 | Defines operation with regard to DTR. When overridden the DTR signal is always assumed to be present. Default=normal. |
| 1.3.6.1.4.1.429.1.6.5.1.1.22 | mdmDiDsrOverride | 0 | 0 | Determines the functionality of the modem's DSR signal. Default=Override. |
| 1.3.6.1.4.1.429.1.6.5.1.1.23 | mdmDiEiaLineStatus | 0 | 0 | Provides a mechanism for the console to determine the current state of the DTE's EIA signals. |
| 1.3.6.1.4.1.429.1.6.5.1.1.24 | mdmDiTransmitFlowCntl | 0 | 0 | Determines if transmit flow control is enabled and if so whether it is hardware or software. Default=none. |
| 1.3.6.1.4.1.429.1.6.5.1.1.25 | mdmDiSoftwareRxFlowCntl | 0 | 0 | Determines if receive software flow control is enabled as well as what type. Default=none. |
| 1.3.6.1.4.1.429.1.6.5.1.1.26 | mdmDiHardwareRxFlowCntl | 0 | 0 | Determines if receive hardware flow control is enabled as well as how it is implemented. Default=RTS ignored. |
| 1.3.6.1.4.1.429.1.6.5.1.1.27 | mdmDiBreakHandling | 0 | 0 | Defines the method used to handle received breaks. When defined as destructive the modem's transmit data buffer is flushed. Whe… |
| 1.3.6.1.4.1.429.1.6.5.1.1.28 | mdmDiDteNvramLock | 0 | 0 | When locked, prohibits the DTE user from changing any of the NVRAM settings in the modem. Default=unlocked. |
| 1.3.6.1.4.1.429.1.6.5.1.1.29 | mdmDiSerialFormat | 0 | 0 | Defines the data bits and parity of the modem's DTE. Used in situations where the attached DTE is unable to send AT commands to … |
| 1.3.6.1.4.1.429.1.6.5.1.1.30 | mdmDiDefaultDteDataRate | 0 | 0 | Defines the data rate of the DTE. Useful in those cases where the DTE is incapable of sending an AT command to initialize the da… |
| 1.3.6.1.4.1.429.1.6.5.1.1.31 | mdmDiRemAccessMsg | 0 | 0 | Specifies if the modem is to send the 'Modem Unavailable' message to the DTE when the DTE attempts to send data to a modem that i… |
| 1.3.6.1.4.1.429.1.6.5.1.1.32 | mdmDiV25DteDataRate | 0 | 0 | Defines the DTE Data Rates supported for V25 bis. |
| 1.3.6.1.4.1.429.1.6.5.1.1.33 | mdmDiSrc | 0 | 0 | Specifies either NIC or Packet Bus as the source for the DTE interface. |
| 1.3.6.1.4.1.429.1.6.5.1.1.34 | mdmDiSlot | 0 | 0 | Specifies the slot address as the DTE interface source when mdmdiSrc is configured for Packet Bus. |
| 1.3.6.1.4.1.429.1.6.5.1.1.35 | mdmDiBusyClock | 0 | 0 | specifies whether the modem will support either the current transmit clock or a new busy out. |
| 1.3.6.1.4.1.429.1.6.5.1.1.36 | mdmDiAtString | 0 | 0 | Provides an interface for issuing an AT command to the modem. Not implemented as a command so as to allow the object to be saved … |
| 1.3.6.1.4.1.429.1.6.5.1.1.37 | mdmDiDtrRecognitionTime | 0 | 0 | S25 register tells the modem how quickly to react when DTR transitions from off to on. Default is 20. Increments are in 10 ms. |