specifies whether the modem will support either the current
transmit clock or a new busy out.
Parsed from file MDM-MIB.mib.txt
Company: None
Module: MDM-MIB
specifies whether the modem will support either the current
transmit clock or a new busy out.
Parsed from file MDM-MIB.mib
Module: MDM-MIB
Vendor: UTStarcom Incorporated
Module: MDM-MIB
[Automatically extracted from oidview.com]
mdmDiBusyClock OBJECT-TYPE SYNTAX INTEGER{ extClock1(1), busyOut(2) } ACCESS read-write STATUS optional DESCRIPTION "specifies whether the modem will support either the current transmit clock or a new busy out." ::= { mdmDiEntry 35 }
mdmDiBusyClock OBJECT-TYPE SYNTAX INTEGER{ extClock1(1), busyOut(2) } ACCESS read-write STATUS optional DESCRIPTION "specifies whether the modem will support either the current transmit clock or a new busy out." ::= { mdmDiEntry 35 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.6.5.1.1.1 | mdmDiIndex | 0 | 0 | The index for the DTE interface table contains the unique value associated with this modem as defined in the chassis mib entity t… |
| 1.3.6.1.4.1.429.1.6.5.1.1.2 | mdmDiEscCodeGuardTime | 0 | 0 | Duration in 50ths of a second of idle time that must precede and follow the modem's command mode escape code. Default=50. |
| 1.3.6.1.4.1.429.1.6.5.1.1.3 | mdmDiLocalEscChar | 0 | 0 | Decimal equivalent of the character that is used to escape to on-line command mode. Values between 128 and 255 disable the escap… |
| 1.3.6.1.4.1.429.1.6.5.1.1.4 | mdmDiCarriageRetChar | 0 | 0 | Specifies the decimal equivalent of the carriage return character. Default=13. |
| 1.3.6.1.4.1.429.1.6.5.1.1.5 | mdmDiLineFeedChar | 0 | 0 | Specifies the decimal equivalent of the line feed character. Default=10. |
| 1.3.6.1.4.1.429.1.6.5.1.1.6 | mdmDiBackspaceChar | 0 | 0 | Specifies the decimal equivalent of the backspace character. Default=8. |
| 1.3.6.1.4.1.429.1.6.5.1.1.7 | mdmDiDelAsBackspace | 0 | 0 | Defines functionality of the delete key. Acts either to delete the character the cursor is currently on or acts the same as the … |
| 1.3.6.1.4.1.429.1.6.5.1.1.8 | mdmDiResetOnDtrEna | 0 | 0 | When enabled, this option will cause the modem to restart when the DTR control signal drops. Default=disabled. |
| 1.3.6.1.4.1.429.1.6.5.1.1.9 | mdmDiResultCodePauseDis | 0 | 0 | When enabled, the modem pauses 250ms before transmission of any result code. Default=enable. |
| 1.3.6.1.4.1.429.1.6.5.1.1.10 | mdmDiInterbridgeEna | 0 | 0 | When enabled, the modem operates in a mode that is compatible with an 'Appletalk InterBridge Network'. Default=disabled. |
| 1.3.6.1.4.1.429.1.6.5.1.1.11 | mdmDiBreakLen | 0 | 0 | Defines the duration of break characters that are sent to the DTE in ARQ mode. Defined in 10ms increments. Default=10(100ms). |
| 1.3.6.1.4.1.429.1.6.5.1.1.12 | mdmDiXonChar | 0 | 0 | Defines the decimal equivalent of the Xon character. This character will be used when software flow control is enabled. Default… |
| 1.3.6.1.4.1.429.1.6.5.1.1.13 | mdmDiXoffChar | 0 | 0 | Defines the decimal equivalent of the xoff character. This character will be used when software flow control is enabled. Defaul… |
| 1.3.6.1.4.1.429.1.6.5.1.1.14 | mdmDiDsrPulseTime | 0 | 0 | Duration in 20 millisecond increments that the DSR signal is pulsed when the modem is configured for pulsed DSR mode. Default=150. |
| 1.3.6.1.4.1.429.1.6.5.1.1.15 | mdmDiRtsCtsDelay | 0 | 0 | Duration in 10 millisecond increments that the modem delays setting CTS after detecting the presence of RTS. Default=1. |
| 1.3.6.1.4.1.429.1.6.5.1.1.16 | mdmDiHiSpeedResCodeEna | 0 | 0 | Determines if connection establishment result codes above 9600 are sent to the DTE. Default=enable. |
| 1.3.6.1.4.1.429.1.6.5.1.1.17 | mdmDiCmdLocalEchoEna | 0 | 0 | Defines whether or not the characters transmitted by the DTE are echoed back when in command mode. Default=disabled. |
| 1.3.6.1.4.1.429.1.6.5.1.1.18 | mdmDiDataModeEchoEna | 0 | 0 | Defines whether or not the DTE's transmitted data is echoed back durring a connection(half duplex). Default=disabled. |
| 1.3.6.1.4.1.429.1.6.5.1.1.19 | mdmDiDteDataRateMode | 0 | 0 | Defines how the modem determines the DTE data rate. When set to the default, follows link rate, the modem switches the DTE speed… |
| 1.3.6.1.4.1.429.1.6.5.1.1.20 | mdmDiCdOverride | 0 | 0 | Defines the operation of the CD(Carrier Detect) signal. When overridden the CD signal is always asserted. Default=normal. |
| 1.3.6.1.4.1.429.1.6.5.1.1.21 | mdmDiDtrOverride | 0 | 0 | Defines operation with regard to DTR. When overridden the DTR signal is always assumed to be present. Default=normal. |
| 1.3.6.1.4.1.429.1.6.5.1.1.22 | mdmDiDsrOverride | 0 | 0 | Determines the functionality of the modem's DSR signal. Default=Override. |
| 1.3.6.1.4.1.429.1.6.5.1.1.23 | mdmDiEiaLineStatus | 0 | 0 | Provides a mechanism for the console to determine the current state of the DTE's EIA signals. |
| 1.3.6.1.4.1.429.1.6.5.1.1.24 | mdmDiTransmitFlowCntl | 0 | 0 | Determines if transmit flow control is enabled and if so whether it is hardware or software. Default=none. |
| 1.3.6.1.4.1.429.1.6.5.1.1.25 | mdmDiSoftwareRxFlowCntl | 0 | 0 | Determines if receive software flow control is enabled as well as what type. Default=none. |
| 1.3.6.1.4.1.429.1.6.5.1.1.26 | mdmDiHardwareRxFlowCntl | 0 | 0 | Determines if receive hardware flow control is enabled as well as how it is implemented. Default=RTS ignored. |
| 1.3.6.1.4.1.429.1.6.5.1.1.27 | mdmDiBreakHandling | 0 | 0 | Defines the method used to handle received breaks. When defined as destructive the modem's transmit data buffer is flushed. Whe… |
| 1.3.6.1.4.1.429.1.6.5.1.1.28 | mdmDiDteNvramLock | 0 | 0 | When locked, prohibits the DTE user from changing any of the NVRAM settings in the modem. Default=unlocked. |
| 1.3.6.1.4.1.429.1.6.5.1.1.29 | mdmDiSerialFormat | 0 | 0 | Defines the data bits and parity of the modem's DTE. Used in situations where the attached DTE is unable to send AT commands to … |
| 1.3.6.1.4.1.429.1.6.5.1.1.30 | mdmDiDefaultDteDataRate | 0 | 0 | Defines the data rate of the DTE. Useful in those cases where the DTE is incapable of sending an AT command to initialize the da… |
| 1.3.6.1.4.1.429.1.6.5.1.1.31 | mdmDiRemAccessMsg | 0 | 0 | Specifies if the modem is to send the 'Modem Unavailable' message to the DTE when the DTE attempts to send data to a modem that i… |
| 1.3.6.1.4.1.429.1.6.5.1.1.32 | mdmDiV25DteDataRate | 0 | 0 | Defines the DTE Data Rates supported for V25 bis. |
| 1.3.6.1.4.1.429.1.6.5.1.1.33 | mdmDiSrc | 0 | 0 | Specifies either NIC or Packet Bus as the source for the DTE interface. |
| 1.3.6.1.4.1.429.1.6.5.1.1.34 | mdmDiSlot | 0 | 0 | Specifies the slot address as the DTE interface source when mdmdiSrc is configured for Packet Bus. |
| 1.3.6.1.4.1.429.1.6.5.1.1.36 | mdmDiAtString | 0 | 0 | Provides an interface for issuing an AT command to the modem. Not implemented as a command so as to allow the object to be saved … |
| 1.3.6.1.4.1.429.1.6.5.1.1.37 | mdmDiDtrRecognitionTime | 0 | 0 | S25 register tells the modem how quickly to react when DTR transitions from off to on. Default is 20. Increments are in 10 ms. |