the router id is usually the ip address of one of the router's
lan interface ip address. this variable can only be set when
usrIpAdminStatus is set to disabled.
Parsed from file USR-IP-ROUTING-MIB.mib.txt
Company: None
Module: USR-IP-ROUTING-MIB
the router id is usually the ip address of one of the router's
lan interface ip address. this variable can only be set when
usrIpAdminStatus is set to disabled.
Parsed from file USR-IP-ROUTING-MIB.mib
Module: USR-IP-ROUTING-MIB
Vendor: UTStarcom Incorporated
Module: USR-IP-ROUTING-MIB
[Automatically extracted from oidview.com]
usrIpRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "the router id is usually the ip address of one of the router's lan interface ip address. this variable can only be set when usrIpAdminStatus is set to disabled." ::= {usrIpRouting 1}
usrIpRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "the router id is usually the ip address of one of the router's lan interface ip address. this variable can only be set when usrIpAdminStatus is set to disabled." ::= {usrIpRouting 1}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.19.1.0 | usrIpRouterId | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.19.2 | usrIpAdminStatus | 1 | 1 | this variable is used to enable or disable the ip routing instance. |
| 1.3.6.1.4.1.429.4.19.3 | usrIpStaticProtoStatus | 1 | 1 | this variable is used to enable or disable static remote routes |
| 1.3.6.1.4.1.429.4.19.4 | usrIpASNumber | 1 | 1 | this is the autonomous system number used by egp, which can only be modified when usrIpAdminStatus is set to disabled. |
| 1.3.6.1.4.1.429.4.19.5 | usrIpRtabMaxAdmin | 1 | 1 | the max admin route table entries for next set. this is put in by rci for lightstream atm. it is not used by lanlinker or nets… |
| 1.3.6.1.4.1.429.4.19.6 | usrIpRtabMax | 1 | 1 | this displays the maximum routing table size, this value can no longer be modified. The max size of the routing table is determin… |
| 1.3.6.1.4.1.429.4.19.7 | usrIpNHEntryMax | 1 | 1 | this defines the maximum next hop entries, which can only be modified when usrIpAdminStatus is set to disabled. the default is 5… |
| 1.3.6.1.4.1.429.4.19.8 | usrIpRtEntryCount | 1 | 1 | this keeps the number of route entries. |
| 1.3.6.1.4.1.429.4.19.9 | usrIpGenStat | 1 | 1 | this variable denotes the existence of the ip routing instance, which can also be used to delete the routing instance. |
| 1.3.6.1.4.1.429.4.19.10 | usrIpRipGenStat | 1 | 1 | this mib variable is used to enable or disable the ip rip instance at the ip routing instance level. it is a no op if ip rip in… |
| 1.3.6.1.4.1.429.4.19.11 | usrIpRipAdminStatus | 1 | 1 | this variable is used to create or delete the ip rip instance. |
| 1.3.6.1.4.1.429.4.19.12 | usrIpRipFlags | 1 | 1 | Several Flags are supported by this mib object, only RIP_FLAG_RFC1058_METRICS, RIP_FLAG_SEND_REQUEST are accessible. The only all… |
| 1.3.6.1.4.1.429.4.19.13 | usrIpIfbTable | 1 | 13 | rci uses interface block to describe the system's network interface which is similar to pilgrim portal. |
| 1.3.6.1.4.1.429.4.19.14 | usrIpRipGenAdminStat | 1 | 1 | this variable is used to disable or enable the ip rip instance at the rip instance level. |
| 1.3.6.1.4.1.429.4.19.15 | usrIpRipGenIntfCnt | 1 | 1 | this variable shows the number of the ip rip interfaces. |
| 1.3.6.1.4.1.429.4.19.16 | usrIpRipGenNbrCnt | 1 | 1 | this variable shows the number of the rip neighbours. |
| 1.3.6.1.4.1.429.4.19.17 | usrIpRipGenJitter | 1 | 1 | this variable is used to enable or disable the rip packet jitter feature. |
| 1.3.6.1.4.1.429.4.19.18 | usrIpRipIfTable | 1 | 20 | usrIpRipIftable |
| 1.3.6.1.4.1.429.4.19.19 | usrIpRip2IfConfTable | 1 | 11 | usrIpRip2IfConftable |
| 1.3.6.1.4.1.429.4.19.20 | usrIpDelRouteAll | 1 | 1 | This object is used to clear the whole routing table - setting this object with ANY value will do this. |
| 1.3.6.1.4.1.429.4.19.21 | usrIPRterBaseCfgFileName | 1 | 1 | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the SLIP … |
| 1.3.6.1.4.1.429.4.19.22 | usrIPRterBaseCFMSaveStatus | 1 | 1 | Setting the value of this object to `save' causes the values of the SLIP Base Group entries to be written out to the current SLIP… |
| 1.3.6.1.4.1.429.4.19.23 | usrIpRTH | 1 | 11 | This entity's IP Routing table. |
| 1.3.6.1.4.1.429.4.19.24 | usrIpRTE | 1 | 11 | This entity's IP Routing table. |
| 1.3.6.1.4.1.429.4.19.26 | usrIpRipRXPacketCount | 1 | 1 | Number of IP RIP packets received. |
| 1.3.6.1.4.1.429.4.19.27 | usrIpRipTXPacketCount | 1 | 1 | Number of IP RIP packets transmitted. |
| 1.3.6.1.4.1.429.4.19.28 | usrIpRipIncorrectPacketCount | 1 | 1 | Number of incorrect IP RIP packets received. |