Specifies whether a trap should be sent if the port
partition state changes.
Parsed from file msh100.mib.txt
Company: None
Module: LBMSH-MIB
Specifies whether a trap should be sent if the port
partition state changes.
Parsed from file LBHUB-MSH-MIB.mib
Module: LBHUB-MSH-MIB
Vendor: 3Com
Module: LBHUB-BOOM-MIB (lbhub-boom.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
mrmPortPartitionEvent OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether a trap should be sent if the port partition state changes." ::= { mrmPortEntry 11 }
mrmPortPartitionEvent OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether a trap should be sent if the port partition state changes." ::= { mrmPortEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.17.1.2.1.1.1 | mrmPortServiceId | 0 | 0 | This object identifies the repeater which this entry contains information. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.2 | mrmPortCardIndex | 0 | 0 | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.3 | mrmPortIndex | 0 | 0 | This object identifies the port within the group for which this entry contains information. This value can never be greater tha… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.4 | mrmPortInterfaceType | 0 | 0 | This object specifies the type of electrical interface made available at the interface to the card for this port. The interface … |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.5 | mrmPortConnectorType | 0 | 0 | This specifies the type of the physical connector through which one would attach to this card. This is distinct from the media t… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.6 | mrmPortAdminStatus | 0 | 0 | Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port mu… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.7 | mrmPortAutoPartitionState | 0 | 0 | The autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The … |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.8 | mrmPortLinkState | 0 | 0 | This object reflects the presence or absence of signal on this port. The signal may be either light in the case of fiber, or gen… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.9 | mrmPortBootState | 0 | 0 | A repeater port may be enabled or disabled after a reset. This parameter indicates the default for this port. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.10 | mrmPortESTFilter | 0 | 0 | This attribute determines whether and which address information is extracted from packets received on a port and forwarded to t… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.12 | mrmPortLinkStateEvent | 0 | 0 | Specifies whether a trap should be sent if the link state changes. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.13 | mrmPortSecurityAvailable | 0 | 0 | Specifies whether security is an available feature on this port. Only ports that have this feature available can have an entry i… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.14 | mrmPortLinkPulse | 0 | 0 | This attribute determines if link pulse generating and monitoring is enabled or disabled for a 10BaseT port. The attribute may t… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.15 | mrmPortModule | 0 | 0 | This attribute indicates whether the port is a modular port or not. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.16 | mrmPortDUDAction | 0 | 0 | DUD Action for this port. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.17 | mrmPortFunction | 0 | 0 | This atribute indicates the function of the port. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.18 | mrmPortTest | 0 | 0 | An object that allows the user to test the operation of a port. Writing test(2) to this object forces the port to perform a dis… |