Setting this object to disabled(2) disables the port. A disabled port
neither transmits nor receives. Once disabled, a port must be
explicitly enabled to restore operation. A port which is disabled
when power is lost or when a reset is exerted shall remain disabled
when normal operation resumes.
The admin status takes precedence over auto- partition and
functionally operates between the auto-partition mechanism and the
AUI/PMA.
Setting this object to enabled(1) enables the port and exerts a BEGIN
on the port's auto-partition state machine.
In effect, when a port is disabled, the value of
mrmPortAutoPartitionState for that port is frozen until the port is
next enabled. When the port becomes enabled, the
mrmPortAutoPartitionState becomes notAutoPartitioned(2), regardless
of its pre-disabling state.)
Parsed from file msh100.mib.txt
Company: None
Module: LBMSH-MIB
Setting this object to disabled(2) disables the port. A disabled port
neither transmits nor receives. Once disabled, a port must be
explicitly enabled to restore operation. A port which is disabled
when power is lost or when a reset is exerted shall remain disabled
when normal operation resumes.
The admin status takes precedence over auto- partition and
functionally operates between the auto-partition mechanism and the
AUI/PMA.
Setting this object to enabled(1) enables the port and exerts a BEGIN
on the port's auto-partition state machine.
In effect, when a port is disabled, the value of
mrmPortAutoPartitionState for that port is frozen until the port is
next enabled. When the port becomes enabled, the
mrmPortAutoPartitionState becomes notAutoPartitioned(2), regardless
of its pre-disabling state.)
Parsed from file LBHUB-MSH-MIB.mib
Module: LBHUB-MSH-MIB
Vendor: 3Com
Module: LBHUB-BOOM-MIB (lbhub-boom.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
mrmPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to restore operation. A port which is disabled when power is lost or when a reset is exerted shall remain disabled when normal operation resumes. The admin status takes precedence over auto- partition and functionally operates between the auto-partition mechanism and the AUI/PMA. Setting this object to enabled(1) enables the port and exerts a BEGIN on the port's auto-partition state machine. In effect, when a port is disabled, the value of mrmPortAutoPartitionState for that port is frozen until the port is next enabled. When the port becomes enabled, the mrmPortAutoPartitionState becomes notAutoPartitioned(2), regardless of its pre-disabling state.)" ::= { mrmPortEntry 6 }
mrmPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to restore operation. A port which is disabled when power is lost or when a reset is exerted shall remain disabled when normal operation resumes. The admin status takes precedence over auto- partition and functionally operates between the auto-partition mechanism and the AUI/PMA. Setting this object to enabled(1) enables the port and exerts a BEGIN on the port's auto-partition state machine. In effect, when a port is disabled, the value of mrmPortAutoPartitionState for that port is frozen until the port is next enabled. When the port becomes enabled, the mrmPortAutoPartitionState becomes notAutoPartitioned(2), regardless of its pre-disabling state.)" ::= { mrmPortEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.17.1.2.1.1.1 | mrmPortServiceId | 0 | 0 | This object identifies the repeater which this entry contains information. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.2 | mrmPortCardIndex | 0 | 0 | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.3 | mrmPortIndex | 0 | 0 | This object identifies the port within the group for which this entry contains information. This value can never be greater tha… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.4 | mrmPortInterfaceType | 0 | 0 | This object specifies the type of electrical interface made available at the interface to the card for this port. The interface … |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.5 | mrmPortConnectorType | 0 | 0 | This specifies the type of the physical connector through which one would attach to this card. This is distinct from the media t… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.7 | mrmPortAutoPartitionState | 0 | 0 | The autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The … |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.8 | mrmPortLinkState | 0 | 0 | This object reflects the presence or absence of signal on this port. The signal may be either light in the case of fiber, or gen… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.9 | mrmPortBootState | 0 | 0 | A repeater port may be enabled or disabled after a reset. This parameter indicates the default for this port. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.10 | mrmPortESTFilter | 0 | 0 | This attribute determines whether and which address information is extracted from packets received on a port and forwarded to t… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.11 | mrmPortPartitionEvent | 0 | 0 | Specifies whether a trap should be sent if the port partition state changes. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.12 | mrmPortLinkStateEvent | 0 | 0 | Specifies whether a trap should be sent if the link state changes. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.13 | mrmPortSecurityAvailable | 0 | 0 | Specifies whether security is an available feature on this port. Only ports that have this feature available can have an entry i… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.14 | mrmPortLinkPulse | 0 | 0 | This attribute determines if link pulse generating and monitoring is enabled or disabled for a 10BaseT port. The attribute may t… |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.15 | mrmPortModule | 0 | 0 | This attribute indicates whether the port is a modular port or not. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.16 | mrmPortDUDAction | 0 | 0 | DUD Action for this port. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.17 | mrmPortFunction | 0 | 0 | This atribute indicates the function of the port. |
| 1.3.6.1.4.1.43.10.17.1.2.1.1.18 | mrmPortTest | 0 | 0 | An object that allows the user to test the operation of a port. Writing test(2) to this object forces the port to perform a dis… |