This is a high level 'smart MIB' object. This object provides a running
average of the bandwidth in use. This value is calculated locally on the
agent and so does not require processor bandwidth from the management
station or occupy valuable network bandwidth communicating with that
station.
By default an agent supporting this parameter will exhibit the following
characteristics:
1) The parameter will be recalculated at approx 15 second intervals
2) Every calculation period the device will read the value
of rptrMonitorPortReadableOctets.
3) The calculation will be performed on the most recent 4 samples as
follows:
4
Sum(sample(i)/(time(i) * K)) * 100/4
i=1
Sample(i) is rptrMonitorPortReadableOctets(i)-rptrMonitorPortReadableOctets(i-1)
time(i) is the time between sample(i-1) and sample(i)
K is the max bytes per unit time (i.e. the available bandwidth K
depends on the ring speed.
The value is expressed as a percentage.
A default threshold exists on this average so that if a calculated
average exceeds 15% a trap will be sent to the management station.
Further traps will not be sent until the average drops to below 10%.
A particular device may provide a means of changing the number of samples,
the averaging period, threshold and threshold action if it so wishes.
Parsed from file lbhub-fms.mib.txt
Company: a3com
Module: LBHUB-FMS-MIB
Vendor: 3Com
Module: LBHUB-BOOM-MIB (lbhub-boom.mib)
Type: TABULAR
Access: read-only
Syntax: Counter
Automatically extracted from www.mibdepot.com
mrmMonRepBandwidthUsed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " This is a high level 'smart MIB' object. This object provides a running average of the bandwidth in use. This value is calculated locally on the agent and so does not require processor bandwidth from the management station or occupy valuable network bandwidth communicating with that station. By default an agent supporting this parameter will exhibit the following characteristics: 1) The parameter will be recalculated at approx 15 second intervals 2) Every calculation period the device will read the value of rptrMonitorPortReadableOctets. 3) The calculation will be performed on the most recent 4 samples as follows: 4 Sum(sample(i)/(time(i) * K)) * 100/4 i=1 Sample(i) is rptrMonitorPortReadableOctets(i)-rptrMonitorPortReadableOctets(i-1) time(i) is the time between sample(i-1) and sample(i) K is the max bytes per unit time (i.e. the available bandwidth K depends on the ring speed. The value is expressed as a percentage. A default threshold exists on this average so that if a calculated average exceeds 15% a trap will be sent to the management station. Further traps will not be sent until the average drops to below 10%. A particular device may provide a means of changing the number of samples, the averaging period, threshold and threshold action if it so wishes." ::= {mrmMonitorRepEntry 28}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.17.2.1.1.1.1 | mrmMonRepServiceId | 0 | 0 | This parameter is used as the index in this table. A modular chassis contains potentially many repeater services. Each repeater … |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.2 | mrmMonRepReadableFrames | 0 | 0 | This counter is incremented by one for each frame whose OctetCount is greater than or equal to minFrameSize and less than or equ… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.3 | mrmMonRepUnicastFrames | 0 | 0 | This counter is incremented by one for each readable frame seen by the Repeater that is addressed to a unicast (non Card) addres… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.4 | mrmMonRepMulticastFrames | 0 | 0 | This counter is incremented by one for each readable frame seen by the Repeater that is addressed to a multicast (non broadcast)… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.5 | mrmMonRepBroadcastFrames | 0 | 0 | This counter is incremented by one for each readable frame seen by the Repeater that is addressed to the broadcast address fffff… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.6 | mrmMonRepReadableOctets | 0 | 0 | This counter is incremented by the octet count for each readable frame received by the repeater. NOTE: This counter does not real… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.7 | mrmMonRepUnicastOctets | 0 | 0 | This object is the number of octets contained in valid frames that have been received on this port in which the destination fiel… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.8 | mrmMonRepMulticastOctets | 0 | 0 | This object is the number of octets contained in valid frames that have been received on this port in which the destination was … |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.9 | mrmMonRepBroadcastOctets | 0 | 0 | This object is the number of octets contained in valid frames that have been received on this port in which the destination was … |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.10 | mrmMonRepFCSErrors | 0 | 0 | This counter is incremented by one for each frame with an FCS error that does not have a framing error and which is of legal fra… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.11 | mrmMonRepAlignmentErrors | 0 | 0 | This counter is incremented by one for each frame with an FCS error that does have a framing error and which is of legal frame s… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.12 | mrmMonRepFrameTooLongs | 0 | 0 | This counter is incremented by one for each frame whose octet count is greater than the max frame size that is received by the r… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.13 | mrmMonRepShortEvents | 0 | 0 | This counter is incremented by one for each carrier event whose duration is less than short event max time that is detected by t… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.14 | mrmMonRepRunts | 0 | 0 | This counter is incremented by one for each carrier event whose duration is greater than short event max time and less than vali… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.15 | mrmMonRepTxCollisions | 0 | 0 | This counter is incremented by one for any CarrierEvent signal on any port of this repeater for which the CollisionEvent signal … |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.16 | mrmMonRepLateEvents | 0 | 0 | This counter is incremented by one each time a collisions occurs after valid packet min time, a late event is counted as both a c… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.17 | mrmMonRepVeryLongEvents | 0 | 0 | This counter is incremented by one each time a carrier event occurs whose duration is greater than the MAU Jabber Lockup Protecti… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.18 | mrmMonRepDataRateMismatches | 0 | 0 | This counter is incremented by one each time a packet has been received by this repeater with the data rate detectably mismatche… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.19 | mrmMonRepAutoPartitions | 0 | 0 | This counter is incremented by one each time the repeater has automatically partitioned any port. NOTE: This counter does not rea… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.20 | mrmMonRepTotalErrors | 0 | 0 | The total number of errors which have occurred on all ports on all groups of this repeater. This counter is the summation of the… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.21 | mrmMonRepBound0 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of 64 octets which were received by ea… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.22 | mrmMonRepBound1 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of between 65 and 127 octets inclusive… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.23 | mrmMonRepBound2 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of between 128 and 255 octets inclusiv… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.24 | mrmMonRepBound3 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of between 256 and 511 octets inclusiv… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.25 | mrmMonRepBound4 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of between 512 and 1023 octets inclusi… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.26 | mrmMonRepBound5 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of between 1024 and 1518 octets inclus… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.27 | mrmMonRepAction | 0 | 0 | This object allows repeater stats specific actions to be implemented. There is only one action currently defined, 'clearCounters… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.29 | mrmMonRepErrorsPer10000Packets | 0 | 0 | This is a high level 'smart MIB' object. This object provides a running average of the number of errors per 10000 packets. This … |