This object is the number of octets contained in valid frames that
have been received on this port in which the destination was the
broadcast address ffffffffffff. By attaching a gauge to this counter
one can monitor the port for broadcast storms. Action can then be taken
to automatically recover network normal operation.
The approximate minimum time for rollover of this counter is 58
minutes.
Parsed from file msh100.mib.txt
Company: None
Module: LBMSH-MIB
This object is the number of octets contained in valid frames that
have been received on this port in which the destination was the
broadcast address ffffffffffff. By attaching a gauge to this counter
one can monitor the port for broadcast storms. Action can then be taken
to automatically recover network normal operation.
The approximate minimum time for rollover of this counter is 58
minutes.
Parsed from file LBHUB-MSH-MIB.mib
Module: LBHUB-MSH-MIB
Vendor: 3Com
Module: LBHUB-BOOM-MIB (lbhub-boom.mib)
Type: TABULAR
Access: read-only
Syntax: Counter
Automatically extracted from www.mibdepot.com
mrmMonRepBroadcastOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " This object is the number of octets contained in valid frames that have been received on this port in which the destination was the broadcast address ffffffffffff. By attaching a gauge to this counter one can monitor the port for broadcast storms. Action can then be taken to automatically recover network normal operation. The approximate minimum time for rollover of this counter is 58 minutes." ::= { mrmMonitorRepEntry 9 }
mrmMonRepBroadcastOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " This object is the number of octets contained in valid frames that have been received on this port in which the destination was the broadcast address ffffffffffff. By attaching a gauge to this counter one can monitor the port for broadcast storms. Action can then be taken to automatically recover network normal operation. The approximate minimum time for rollover of this counter is 58 minutes." ::= { mrmMonitorRepEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.17.2.1.1.1.1 | mrmMonRepServiceId | 0 | 0 | This parameter is used as the index in this table. A modular chassis contains potentially many repeater services. Each repeater … |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.2 | mrmMonRepReadableFrames | 0 | 0 | This counter is incremented by one for each frame whose OctetCount is greater than or equal to minFrameSize and less than or equ… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.3 | mrmMonRepUnicastFrames | 0 | 0 | This counter is incremented by one for each readable frame seen by the Repeater that is addressed to a unicast (non Card) addres… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.4 | mrmMonRepMulticastFrames | 0 | 0 | This counter is incremented by one for each readable frame seen by the Repeater that is addressed to a multicast (non broadcast)… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.5 | mrmMonRepBroadcastFrames | 0 | 0 | This counter is incremented by one for each readable frame seen by the Repeater that is addressed to the broadcast address fffff… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.6 | mrmMonRepReadableOctets | 0 | 0 | This counter is incremented by the octet count for each readable frame received by the repeater. NOTE: This counter does not real… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.7 | mrmMonRepUnicastOctets | 0 | 0 | This object is the number of octets contained in valid frames that have been received on this port in which the destination fiel… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.8 | mrmMonRepMulticastOctets | 0 | 0 | This object is the number of octets contained in valid frames that have been received on this port in which the destination was … |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.10 | mrmMonRepFCSErrors | 0 | 0 | This counter is incremented by one for each frame with an FCS error that does not have a framing error and which is of legal fra… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.11 | mrmMonRepAlignmentErrors | 0 | 0 | This counter is incremented by one for each frame with an FCS error that does have a framing error and which is of legal frame s… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.12 | mrmMonRepFrameTooLongs | 0 | 0 | This counter is incremented by one for each frame whose octet count is greater than the max frame size that is received by the r… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.13 | mrmMonRepShortEvents | 0 | 0 | This counter is incremented by one for each carrier event whose duration is less than short event max time that is detected by t… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.14 | mrmMonRepRunts | 0 | 0 | This counter is incremented by one for each carrier event whose duration is greater than short event max time and less than vali… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.15 | mrmMonRepTxCollisions | 0 | 0 | This counter is incremented by one for any CarrierEvent signal on any port of this repeater for which the CollisionEvent signal … |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.16 | mrmMonRepLateEvents | 0 | 0 | This counter is incremented by one each time a collisions occurs after valid packet min time, a late event is counted as both a c… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.17 | mrmMonRepVeryLongEvents | 0 | 0 | This counter is incremented by one each time a carrier event occurs whose duration is greater than the MAU Jabber Lockup Protecti… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.18 | mrmMonRepDataRateMismatches | 0 | 0 | This counter is incremented by one each time a packet has been received by this repeater with the data rate detectably mismatche… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.19 | mrmMonRepAutoPartitions | 0 | 0 | This counter is incremented by one each time the repeater has automatically partitioned any port. NOTE: This counter does not rea… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.20 | mrmMonRepTotalErrors | 0 | 0 | The total number of errors which have occurred on all ports on all groups of this repeater. This counter is the summation of the… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.21 | mrmMonRepBound0 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of 64 octets which were received by ea… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.22 | mrmMonRepBound1 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of between 65 and 127 octets inclusive… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.23 | mrmMonRepBound2 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of between 128 and 255 octets inclusiv… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.24 | mrmMonRepBound3 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of between 256 and 511 octets inclusiv… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.25 | mrmMonRepBound4 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of between 512 and 1023 octets inclusi… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.26 | mrmMonRepBound5 | 0 | 0 | This object is a summation of the number of frames (including error frames) with a length of between 1024 and 1518 octets inclus… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.27 | mrmMonRepAction | 0 | 0 | This object allows repeater stats specific actions to be implemented. There is only one action currently defined, 'clearCounters… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.28 | mrmMonRepBandwidthUsed | 0 | 0 | This is a high level 'smart MIB' object. This object provides a running average of the bandwidth in use. This value is calculate… |
| 1.3.6.1.4.1.43.10.17.2.1.1.1.29 | mrmMonRepErrorsPer10000Packets | 0 | 0 | This is a high level 'smart MIB' object. This object provides a running average of the number of errors per 10000 packets. This … |