The status column for this IOT ENET interface.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
This object may only be set to createAndGo(4).
Setting this object to active(1) when its value
is already active(1) is a no-op.
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit a row based on
the contents of the objects in the row. If all necessary
information is present in the row and the values are
acceptable to the agent, the agent will change the
status to active(1). If any of the necessary objects
are not available, the agent will reject the creation
request.
Parsed from file qbvtvc.mib.txt
Company: None
Module: QB-VT15-MIB
The status column for this IOT ENET interface.
This OBJECT can be set to:
createAndGo(4)
destroy(6)
The following values may be read:
active(1)
This object may only be set to createAndGo(4).
Setting this object to active(1) when its value
is already active(1) is a no-op.
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit a row based on
the contents of the objects in the row. If all necessary
information is present in the row and the values are
acceptable to the agent, the agent will change the
status to active(1). If any of the necessary objects
are not available, the agent will reject the creation
request.
Parsed from file QB-VT15-MIB.mib
Module: QB-VT15-MIB
Vendor: Quantum Bridge
Module: QB-VT15-MIB
[Automatically extracted from oidview.com]
qbVTVCConnRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status column for this IOT ENET interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) This object may only be set to createAndGo(4). Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to createAndGo(4) causes the agent to attempt to create and commit a row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptable to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request." ::= { qbVTVCConnEntry 12 }
qbVTVCConnRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status column for this IOT ENET interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) This object may only be set to createAndGo(4). Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to createAndGo(4) causes the agent to attempt to create and commit a row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptable to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request." ::= { qbVTVCConnEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.9.1.1.1.1 | qbVTVCIfIndex | 0 | 0 | The STS-3/SDH-1 signal interface. |
| 1.3.6.1.4.1.4323.2.9.1.1.1.2 | qbVTVCConnId | 0 | 0 | The identifier of the specified VT (virtual tributary) or VC signal. The VT identifier is determined by using the following formu… |
| 1.3.6.1.4.1.4323.2.9.1.1.1.3 | qbVTVCConnIotAtmIfIndex | 0 | 0 | An IOT interface index of the atm layer interface or DS1/E1 interface of the connection between an ATM/IOT and a VT1.5/VC12 or V… |
| 1.3.6.1.4.1.4323.2.9.1.1.1.4 | qbVTVCConnName | 0 | 0 | The textual name of the VT1.5/VC12 connection as specified by a user. It provides a non-volatile handle for this PVC.The supplied… |
| 1.3.6.1.4.1.4323.2.9.1.1.1.5 | qbVTVCConnAdminStatus | 0 | 0 | The desired administrative status of the connection The up and down states indicate that the traffic flow is enabled or disabled … |
| 1.3.6.1.4.1.4323.2.9.1.1.1.6 | qbVTVCConnOperStatus | 0 | 0 | The current operational status of the connection. |
| 1.3.6.1.4.1.4323.2.9.1.1.1.7 | qbVTVCConnLastChange | 0 | 0 | The value of sysUpTime at the time this connection entered its current operational state. |
| 1.3.6.1.4.1.4323.2.9.1.1.1.8 | qbVTVCConnAtmVpi | 0 | 0 | The value of this object is equal to the VPI used by the ATM VCL mapped through this connection to a VT. The value is irrelevant … |
| 1.3.6.1.4.1.4323.2.9.1.1.1.9 | qbVTVCConnAtmVci | 0 | 0 | The value of this object is equal to the VCI used by the ATM VCL mapped through this connection to a VT. The value is irrelevant … |
| 1.3.6.1.4.1.4323.2.9.1.1.1.10 | qbVTVCConnKind | 0 | 0 | The VT connection type. Two types of connection can be provisioned on the VT/sonet port (IOT-VT and VT-ATM) |
| 1.3.6.1.4.1.4323.2.9.1.1.1.11 | qbVTVCCrossConnId | 0 | 0 | This object is instantiated only for a VT/VC which is cross-connected to another VT/VC. Two entries that have the same value belo… |
| 1.3.6.1.4.1.4323.2.9.1.1.1.13 | qbVTVCConnLoopback | 0 | 0 | Activate a connection loopback for a PVC that has an endpoint on this VT. This object, when read, returns one of the following res… |
| 1.3.6.1.4.1.4323.2.9.1.1.1.14 | qbVTVCConnLoopbackEndpt | 0 | 0 | Define an endpoint on which loopback is activated or disabled. The object works in conjunction with the qbVTVCConnLoopback. |