Define an endpoint on which loopback is activated or
disabled. The object works in conjunction with the qbVTVCConnLoopback.
Parsed from file qbvtvc.mib.txt
Company: None
Module: QB-VT15-MIB
Define an endpoint on which loopback is activated or
disabled. The object works in conjunction with the qbVTVCConnLoopback.
Parsed from file QB-VT15-MIB.mib
Module: QB-VT15-MIB
Vendor: Quantum Bridge
Module: QB-VT15-MIB
[Automatically extracted from oidview.com]
qbVTVCConnLoopbackEndpt OBJECT-TYPE SYNTAX INTEGER { vtLoopback(1), nonVtLoopback(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Define an endpoint on which loopback is activated or disabled. The object works in conjunction with the qbVTVCConnLoopback." DEFVAL { vtLoopback } ::= { qbVTVCConnEntry 14 }
qbVTVCConnLoopbackEndpt OBJECT-TYPE SYNTAX INTEGER { vtLoopback(1), nonVtLoopback(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Define an endpoint on which loopback is activated or disabled. The object works in conjunction with the qbVTVCConnLoopback." DEFVAL { vtLoopback } ::= { qbVTVCConnEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.9.1.1.1.1 | qbVTVCIfIndex | 0 | 0 | The STS-3/SDH-1 signal interface. |
| 1.3.6.1.4.1.4323.2.9.1.1.1.2 | qbVTVCConnId | 0 | 0 | The identifier of the specified VT (virtual tributary) or VC signal. The VT identifier is determined by using the following formu… |
| 1.3.6.1.4.1.4323.2.9.1.1.1.3 | qbVTVCConnIotAtmIfIndex | 0 | 0 | An IOT interface index of the atm layer interface or DS1/E1 interface of the connection between an ATM/IOT and a VT1.5/VC12 or V… |
| 1.3.6.1.4.1.4323.2.9.1.1.1.4 | qbVTVCConnName | 0 | 0 | The textual name of the VT1.5/VC12 connection as specified by a user. It provides a non-volatile handle for this PVC.The supplied… |
| 1.3.6.1.4.1.4323.2.9.1.1.1.5 | qbVTVCConnAdminStatus | 0 | 0 | The desired administrative status of the connection The up and down states indicate that the traffic flow is enabled or disabled … |
| 1.3.6.1.4.1.4323.2.9.1.1.1.6 | qbVTVCConnOperStatus | 0 | 0 | The current operational status of the connection. |
| 1.3.6.1.4.1.4323.2.9.1.1.1.7 | qbVTVCConnLastChange | 0 | 0 | The value of sysUpTime at the time this connection entered its current operational state. |
| 1.3.6.1.4.1.4323.2.9.1.1.1.8 | qbVTVCConnAtmVpi | 0 | 0 | The value of this object is equal to the VPI used by the ATM VCL mapped through this connection to a VT. The value is irrelevant … |
| 1.3.6.1.4.1.4323.2.9.1.1.1.9 | qbVTVCConnAtmVci | 0 | 0 | The value of this object is equal to the VCI used by the ATM VCL mapped through this connection to a VT. The value is irrelevant … |
| 1.3.6.1.4.1.4323.2.9.1.1.1.10 | qbVTVCConnKind | 0 | 0 | The VT connection type. Two types of connection can be provisioned on the VT/sonet port (IOT-VT and VT-ATM) |
| 1.3.6.1.4.1.4323.2.9.1.1.1.11 | qbVTVCCrossConnId | 0 | 0 | This object is instantiated only for a VT/VC which is cross-connected to another VT/VC. Two entries that have the same value belo… |
| 1.3.6.1.4.1.4323.2.9.1.1.1.12 | qbVTVCConnRowStatus | 0 | 0 | The status column for this IOT ENET interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be rea… |
| 1.3.6.1.4.1.4323.2.9.1.1.1.13 | qbVTVCConnLoopback | 0 | 0 | Activate a connection loopback for a PVC that has an endpoint on this VT. This object, when read, returns one of the following res… |