In software versions less than 4.1, this variable
indicates the type of communication that is currently
being used by the SNS entities in the SAN. All SNS
entities in the SAN must use the same type for proper
functionality.
In software version 4.1, this variable is not used.
It returns the same value as fcswSNSCommSet.
Parsed from file NISHAN-MGT.mib.txt
Company: brocade
Module: NISHAN-MGT
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
fcswSNSCommCurrent OBJECT-TYPE SYNTAX INTEGER {l2Brdcst(1), multicast(2), unicast(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "In software versions less than 4.1, this variable indicates the type of communication that is currently being used by the SNS entities in the SAN. All SNS entities in the SAN must use the same type for proper functionality. In software version 4.1, this variable is not used. It returns the same value as fcswSNSCommSet." ::= { nishanFCsw 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4369.1.8.11.0 | fcswSNSCommCurrent | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4369.1.8.1 | fcswMaxZoneId | 1 | 1 | The maximum Zone ID that is supported in SoIP network. |
| 1.3.6.1.4.1.4369.1.8.2 | fcswPortsCanBelongInMaxNumZones | 1 | 1 | The Maximum number of Zones that any port can be configured in a SoIP network. |
| 1.3.6.1.4.1.4369.1.8.3 | fcswNewDeviceZoneStatus | 1 | 1 | DURABLE: { inNoZone } Zone Status for new device when plugged in this switch. Either the new device will automatically go in no z… |
| 1.3.6.1.4.1.4369.1.8.7 | fcswZoneInfoTable | 1 | 7 | A table containing configuration information for each ZONE configured into the device by (local or network) management. All ent… |
| 1.3.6.1.4.1.4369.1.8.8 | fcswNumFcPortMapEntry | 1 | 1 | The current number of entries in fcswFcPortMapTable. |
| 1.3.6.1.4.1.4369.1.8.9 | fcswFcPortMapTable | 1 | 6 | FC Port Loop table |
| 1.3.6.1.4.1.4369.1.8.10 | fcswSNSCommSet | 1 | 1 | Indicates the type of communication that will be used by the SNS entities in the SAN. This setting takes effect after the next r… |
| 1.3.6.1.4.1.4369.1.8.12 | fcswPrimarySNSIpAddress | 1 | 1 | The in-band IP address of the current primary SNS in this SAN. |
| 1.3.6.1.4.1.4369.1.8.13 | fcswPrimarySNSMgtIpAddress | 1 | 1 | The out-of-band/management IP address of the current primary SNS in this SAN. |
| 1.3.6.1.4.1.4369.1.8.14 | fcswSNSLocalRoleSet | 1 | 1 | Indicates the role that the local SNS entity will take after the next reset of the switch. server: the switch will participate in… |
| 1.3.6.1.4.1.4369.1.8.15 | fcswSNSRoleStatus | 1 | 1 | The current Name Server mode of this device. server: the switch is elected as a primary server; client: the switch did not partic… |
| 1.3.6.1.4.1.4369.1.8.16 | fcswNsPortTable | 1 | 19 | The SNS Port table for this SAN. |
| 1.3.6.1.4.1.4369.1.8.17 | fcswALPortMappingTable | 1 | 3 | AL port virtual mapping table |
| 1.3.6.1.4.1.4369.1.8.18 | fcswNsNodeTable | 1 | 5 | The SNS Node table for this SAN. |
| 1.3.6.1.4.1.4369.1.8.19 | fcpPortTable | 1 | 11 | This table gives/stores registered SCSI FCP targets properties. |
| 1.3.6.1.4.1.4369.1.8.20 | fcswSNSCommPortSet | 1 | 1 | For software versions before 4.1, this variable indicates the UDP/TCP port that the local SNS entity will use after the next rese… |
| 1.3.6.1.4.1.4369.1.8.21 | fcswSNSCommPortCurrent | 1 | 1 | The current UDP port being used for name server communication. For software version 4.1 and later, this variable returns the same… |
| 1.3.6.1.4.1.4369.1.8.22 | fcswSNSL3McastGrpSet | 1 | 1 | For software versions before 4.1, this variable indicates the multicast group that the local SNS entity will use after the next r… |
| 1.3.6.1.4.1.4369.1.8.23 | fcswSNSL3McastGrpCurrent | 1 | 1 | The current multicast group being used for name server communication. This group is only valid if multicast communication has be… |
| 1.3.6.1.4.1.4369.1.8.24 | fcswNumSNSPorts | 1 | 1 | The current number of entries in Name Server's port table. |
| 1.3.6.1.4.1.4369.1.8.25 | fcswNumSNSNodes | 1 | 1 | The current number of entries in Name Server's node table. |
| 1.3.6.1.4.1.4369.1.8.26 | fcswNumSNSZones | 1 | 1 | The current total number of entries in SNS zone table. |
| 1.3.6.1.4.1.4369.1.8.27 | fcswSNSCommTypeSet | 1 | 1 | Indicates the communication type that the SNS will use after the next reinitialization. All SNS clients in the network must use… |
| 1.3.6.1.4.1.4369.1.8.28 | fcswSNSCommTypeCurrent | 1 | 1 | The communication type that the SNS is currently using for communication. All SNS clients in the network must use the same commun… |
| 1.3.6.1.4.1.4369.1.8.29 | fcswSNSUnicastCfgTable | 1 | 4 | SNS IP Address Table for Unicast Communication Configuration. |
| 1.3.6.1.4.1.4369.1.8.30 | fcswSNSrevInfo | 2 | 4 | None |
| 1.3.6.1.4.1.4369.1.8.31 | fcswSNSzsInfo | 1 | 7 | None |
| 1.3.6.1.4.1.4369.1.8.32 | fcswSNSLunMapping | 1 | 1 | Indicates whether LUN Masking/Mapping is enabled or disabled. |
| 1.3.6.1.4.1.4369.1.8.33 | fcswLunsTable | 1 | 3 | Contains status parameters specific to LUNs. |
| 1.3.6.1.4.1.4369.1.8.34 | fcswLunInfoTable | 1 | 14 | Contains status parameters specific to LUNs. |
| 1.3.6.1.4.1.4369.1.8.35 | fcswLunMappingTable | 1 | 6 | Contains status parameters specific to LUNs. |