Contains status parameters specific to LUNs.
Parsed from file NISHAN-MGT.mib.txt
Company: brocade
Module: NISHAN-MGT
Vendor: Brocade
Module: NISHAN-MGT (NISHAN-MGT.mib)
Type: TABLE
Access: not-accessible
Syntax: SEQUENCE OF
Automatically extracted from www.mibdepot.com
fcswLunInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF FcswLunInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains status parameters specific to LUNs." ::= { nishanFCsw 34 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4369.1.8.34.1 | fcswLunInfoEntry | 13 | 13 | Information for the Nishan SNS LUNs. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4369.1.8.1 | fcswMaxZoneId | 1 | 1 | The maximum Zone ID that is supported in SoIP network. |
| 1.3.6.1.4.1.4369.1.8.2 | fcswPortsCanBelongInMaxNumZones | 1 | 1 | The Maximum number of Zones that any port can be configured in a SoIP network. |
| 1.3.6.1.4.1.4369.1.8.3 | fcswNewDeviceZoneStatus | 1 | 1 | DURABLE: { inNoZone } Zone Status for new device when plugged in this switch. Either the new device will automatically go in no z… |
| 1.3.6.1.4.1.4369.1.8.7 | fcswZoneInfoTable | 1 | 7 | A table containing configuration information for each ZONE configured into the device by (local or network) management. All ent… |
| 1.3.6.1.4.1.4369.1.8.8 | fcswNumFcPortMapEntry | 1 | 1 | The current number of entries in fcswFcPortMapTable. |
| 1.3.6.1.4.1.4369.1.8.9 | fcswFcPortMapTable | 1 | 6 | FC Port Loop table |
| 1.3.6.1.4.1.4369.1.8.10 | fcswSNSCommSet | 1 | 1 | Indicates the type of communication that will be used by the SNS entities in the SAN. This setting takes effect after the next r… |
| 1.3.6.1.4.1.4369.1.8.11 | fcswSNSCommCurrent | 1 | 1 | In software versions less than 4.1, this variable indicates the type of communication that is currently being used by the SNS ent… |
| 1.3.6.1.4.1.4369.1.8.12 | fcswPrimarySNSIpAddress | 1 | 1 | The in-band IP address of the current primary SNS in this SAN. |
| 1.3.6.1.4.1.4369.1.8.13 | fcswPrimarySNSMgtIpAddress | 1 | 1 | The out-of-band/management IP address of the current primary SNS in this SAN. |
| 1.3.6.1.4.1.4369.1.8.14 | fcswSNSLocalRoleSet | 1 | 1 | Indicates the role that the local SNS entity will take after the next reset of the switch. server: the switch will participate in… |
| 1.3.6.1.4.1.4369.1.8.15 | fcswSNSRoleStatus | 1 | 1 | The current Name Server mode of this device. server: the switch is elected as a primary server; client: the switch did not partic… |
| 1.3.6.1.4.1.4369.1.8.16 | fcswNsPortTable | 1 | 19 | The SNS Port table for this SAN. |
| 1.3.6.1.4.1.4369.1.8.17 | fcswALPortMappingTable | 1 | 3 | AL port virtual mapping table |
| 1.3.6.1.4.1.4369.1.8.18 | fcswNsNodeTable | 1 | 5 | The SNS Node table for this SAN. |
| 1.3.6.1.4.1.4369.1.8.19 | fcpPortTable | 1 | 11 | This table gives/stores registered SCSI FCP targets properties. |
| 1.3.6.1.4.1.4369.1.8.20 | fcswSNSCommPortSet | 1 | 1 | For software versions before 4.1, this variable indicates the UDP/TCP port that the local SNS entity will use after the next rese… |
| 1.3.6.1.4.1.4369.1.8.21 | fcswSNSCommPortCurrent | 1 | 1 | The current UDP port being used for name server communication. For software version 4.1 and later, this variable returns the same… |
| 1.3.6.1.4.1.4369.1.8.22 | fcswSNSL3McastGrpSet | 1 | 1 | For software versions before 4.1, this variable indicates the multicast group that the local SNS entity will use after the next r… |
| 1.3.6.1.4.1.4369.1.8.23 | fcswSNSL3McastGrpCurrent | 1 | 1 | The current multicast group being used for name server communication. This group is only valid if multicast communication has be… |
| 1.3.6.1.4.1.4369.1.8.24 | fcswNumSNSPorts | 1 | 1 | The current number of entries in Name Server's port table. |
| 1.3.6.1.4.1.4369.1.8.25 | fcswNumSNSNodes | 1 | 1 | The current number of entries in Name Server's node table. |
| 1.3.6.1.4.1.4369.1.8.26 | fcswNumSNSZones | 1 | 1 | The current total number of entries in SNS zone table. |
| 1.3.6.1.4.1.4369.1.8.27 | fcswSNSCommTypeSet | 1 | 1 | Indicates the communication type that the SNS will use after the next reinitialization. All SNS clients in the network must use… |
| 1.3.6.1.4.1.4369.1.8.28 | fcswSNSCommTypeCurrent | 1 | 1 | The communication type that the SNS is currently using for communication. All SNS clients in the network must use the same commun… |
| 1.3.6.1.4.1.4369.1.8.29 | fcswSNSUnicastCfgTable | 1 | 4 | SNS IP Address Table for Unicast Communication Configuration. |
| 1.3.6.1.4.1.4369.1.8.30 | fcswSNSrevInfo | 2 | 4 | None |
| 1.3.6.1.4.1.4369.1.8.31 | fcswSNSzsInfo | 1 | 7 | None |
| 1.3.6.1.4.1.4369.1.8.32 | fcswSNSLunMapping | 1 | 1 | Indicates whether LUN Masking/Mapping is enabled or disabled. |
| 1.3.6.1.4.1.4369.1.8.33 | fcswLunsTable | 1 | 3 | Contains status parameters specific to LUNs. |
| 1.3.6.1.4.1.4369.1.8.35 | fcswLunMappingTable | 1 | 6 | Contains status parameters specific to LUNs. |