Indicates the status of the global configuration entry
execution. If different than 'none', represents the last
error condition present.
'complete' indicates the Global configuration success with
no errors.
'errorNoPhysIndex' indicates the value of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex does not
exist.
'errorSetFailures' indicates the global set was commit but
individual QAM channels reported errors on sets. The
counter docsIfMCmtsEqamGlobCfgDownErrorCount is
increased for each QAM channel set failure.
'errorNoCommitted' indicates the entry was not committed as
sets to the associated QAM channels due to inconsistent
PHY parameters. Few possible cases are:
- refer to the docsIfMCmtsEqamGlogCfgDownAnnex
constraints and related Annex objects as it
describes.
- setting an unique parameter with wrong syntax, leaving
the entry in 'notReady' status See
RowStatus Object
description.
'warningDependencies' indicates the command was executed
and the system may have detected dependencies. This
execution code is optional and considered a warning
rather than an error, as the management entity can have
knowledge about group dependencies prior to setting an
entry by inspecting docsIfMCmtsEqamGroupDependencyTable.
'errorOther' indicates an error condition not considered in
the above situations.
As multiple QAM channels are set only the last error
condition is maintained in case of a no 'complete'
execution status. A warning condition (e.g.,
'warningDependencies' does not override an existing
error condition (other enumeration values).
Indicates the status of the global configuration entry
execution. If different than 'none', represents the last
error condition present.
'complete' indicates the Global configuration success with
no errors.
'errorNoPhysIndex' indicates the value of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex does not
exist.
'errorSetFailures' indicates the global set was commit but
individual QAM channels reported errors on sets. The
counter docsIfMCmtsEqamGlobCfgDownErrorCount is
increased for each QAM channel set failure.
'errorNoCommitted' indicates the entry was not committed as
sets to the associated QAM channels due to inconsistent
PHY parameters. Few possible cases are:
- refer to the docsIfMCmtsEqamGlogCfgDownAnnex
constraints and related Annex objects as it
describes.
- setting an unique parameter with wrong syntax, leaving
the entry in 'notReady' status See
RowStatus Object
description.
'warningDependencies' indicates the command was executed
and the system may have detected dependencies. This
execution code is optional and considered a warning
rather than an error, as the management entity can have
knowledge about group dependencies prior to setting an
entry by inspecting docsIfMCmtsEqamGroupDependencyTable.
'errorOther' indicates an error condition not considered in
the above situations.
As multiple QAM channels are set only the last error
condition is maintained in case of a no 'complete'
execution status. A warning condition (e.g.,
'warningDependencies' does not override an existing
error condition (other enumeration values).
Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB
Indicates the status of the global configuration entry
execution. If different than 'none', represents the last
error condition present.
'complete' indicates the Global configuration success with
no errors.
'errorNoPhysIndex' indicates the value of
docsIfMCmtsEqamGlobCfgDownPhysicalIndex does not
exist.
'errorSetFailures' indicates the global set was commit but
individual QAM channels reported errors on sets. The
counter docsIfMCmtsEqamGlobCfgDownErrorCount is
increased for each QAM channel set failure.
'errorNoCommitted' indicates the entry was not committed as
sets to the associated QAM channels due to inconsistent
PHY parameters. Few possible cases are:
- refer to the docsIfMCmtsEqamGlogCfgDownAnnex
constraints and related Annex objects as it
describes.
- setting an unique parameter with wrong syntax, leaving
the entry in 'notReady' status See
RowStatus Object
description.
'warningDependencies' indicates the command was executed
and the system may have detected dependencies. This
execution code is optional and considered a warning
rather than an error, as the management entity can have
knowledge about group dependencies prior to setting an
entry by inspecting docsIfMCmtsEqamGroupDependencyTable.
'errorOther' indicates an error condition not considered in
the above situations.
As multiple QAM channels are set only the last error
condition is maintained in case of a no 'complete'
execution status. A warning condition (e.g.,
'warningDependencies' does not override an existing
error condition (other enumeration values).
docsIfMCmtsEqamGlobCfgDownExecutionCode OBJECT-TYPE SYNTAX INTEGER { complete(1), errorNoPhysIndex(2), errorNoQAMChannels(3), errorSetFailures(4), errorNoCommitted(5), warningDependencies(6), errorOther(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the status of the global configuration entry execution. If different than 'none', represents the last error condition present. 'complete' indicates the Global configuration success with no errors. 'errorNoPhysIndex' indicates the value of docsIfMCmtsEqamGlobCfgDownPhysicalIndex does not exist. 'errorSetFailures' indicates the global set was commit but individual QAM channels reported errors on sets. The counter docsIfMCmtsEqamGlobCfgDownErrorCount is increased for each QAM channel set failure. 'errorNoCommitted' indicates the entry was not committed as sets to the associated QAM channels due to inconsistent PHY parameters. Few possible cases are: - refer to the docsIfMCmtsEqamGlogCfgDownAnnex constraints and related Annex objects as it describes. - setting an unique parameter with wrong syntax, leaving the entry in 'notReady' status See RowStatus Object description. 'warningDependencies' indicates the command was executed and the system may have detected dependencies. This execution code is optional and considered a warning rather than an error, as the management entity can have knowledge about group dependencies prior to setting an entry by inspecting docsIfMCmtsEqamGroupDependencyTable. 'errorOther' indicates an error condition not considered in the above situations. As multiple QAM channels are set only the last error condition is maintained in case of a no 'complete' execution status. A warning condition (e.g., 'warningDependencies' does not override an existing error condition (other enumeration values)." ::= { docsIfMCmtsEqamGlobCfgDownEntry 12 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB
[Automatically extracted from oidview.com]
docsIfMCmtsEqamGlobCfgDownExecutionCode OBJECT-TYPE SYNTAX INTEGER { complete(1), errorNoPhysIndex(2), errorNoQAMChannels(3), errorSetFailures(4), errorNoCommitted(5), warningDependencies(6), errorOther(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the global configuration entry execution. If different than 'none', represents the last error condition present. 'complete' indicates the Global configuration success with no errors. 'errorNoPhysIndex' indicates the value of docsIfMCmtsEqamGlobCfgDownPhysicalIndex does not exist. 'errorSetFailures' indicates the global set was commit but individual QAM channels reported errors on sets. The counter docsIfMCmtsEqamGlobCfgDownErrorCount is increased for each QAM channel set failure. 'errorNoCommitted' indicates the entry was not committed as sets to the associated QAM channels due to inconsistent PHY parameters. Few possible cases are: - refer to the docsIfMCmtsEqamGlogCfgDownAnnex constraints and related Annex objects as it describes. - setting an unique parameter with wrong syntax, leaving the entry in 'notReady' status See RowStatus Object description. 'warningDependencies' indicates the command was executed and the system may have detected dependencies. This execution code is optional and considered a warning rather than an error, as the management entity can have knowledge about group dependencies prior to setting an entry by inspecting docsIfMCmtsEqamGroupDependencyTable. 'errorOther' indicates an error condition not considered in the above situations. As multiple QAM channels are set only the last error condition is maintained in case of a no 'complete' execution status. A warning condition (e.g., 'warningDependencies' does not override an existing error condition (other enumeration values)." ::= { docsIfMCmtsEqamGlobCfgDownEntry 12 }
docsIfMCmtsEqamGlobCfgDownExecutionCode OBJECT-TYPE SYNTAX INTEGER { complete(1), errorNoPhysIndex(2), errorNoQAMChannels(3), errorSetFailures(4), errorNoCommitted(5), warningDependencies(6), errorOther(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the global configuration entry execution. If different than 'none', represents the last error condition present. 'complete' indicates the Global configuration success with no errors. 'errorNoPhysIndex' indicates the value of docsIfMCmtsEqamGlobCfgDownPhysicalIndex does not exist. 'errorSetFailures' indicates the global set was commit but individual QAM channels reported errors on sets. The counter docsIfMCmtsEqamGlobCfgDownErrorCount is increased for each QAM channel set failure. 'errorNoCommitted' indicates the entry was not committed as sets to the associated QAM channels due to inconsistent PHY parameters. Few possible cases are: - refer to the docsIfMCmtsEqamGlogCfgDownAnnex constraints and related Annex objects as it describes. - setting an unique parameter with wrong syntax, leaving the entry in 'notReady' status See RowStatus Object description. 'warningDependencies' indicates the command was executed and the system may have detected dependencies. This execution code is optional and considered a warning rather than an error, as the management entity can have knowledge about group dependencies prior to setting an entry by inspecting docsIfMCmtsEqamGroupDependencyTable. 'errorOther' indicates an error condition not considered in the above situations. As multiple QAM channels are set only the last error condition is maintained in case of a no 'complete' execution status. A warning condition (e.g., 'warningDependencies' does not override an existing error condition (other enumeration values)." ::= { docsIfMCmtsEqamGlobCfgDownEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.1 | docsIfMCmtsEqamGlobCfgDownIndex | 0 | 0 | The unique identifier of entries in this table. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.2 | docsIfMCmtsEqamGlobCfgDownPhysicalIndex | 0 | 0 | The ENTITY-MIB Physical Index that includes the QAM channels associated to the global parameter being set. The QAM Channels cover… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.3 | docsIfMCmtsEqamGlobCfgDownBandwidth | 0 | 0 | The object for global configuration of Downstream channel bandwidth of the QAM channels in the containment tree of docsIfMCmtsEqa… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.4 | docsIfMCmtsEqamGlobCfgDownPower | 0 | 0 | The object for global configuration of Downstream channel Power Level of the QAM channels in the containment tree of docsIfMCmtsE… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.5 | docsIfMCmtsEqamGlobCfgDownModulation | 0 | 0 | The object for global configuration of Downstream channel modulation of the QAM channels in the containment tree of docsIfMCmtsEq… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.6 | docsIfMCmtsEqamGlobCfgDownInterleave | 0 | 0 | The object for global configuration of Downstream channel interleave of the QAM channels in the containment tree of docsIfMCmtsEq… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.7 | docsIfMCmtsEqamGlogCfgDownAnnex | 0 | 0 | The object for global configuration of Downstream channel J.83 Annex of the QAM channels in the containment tree of docsIfMCmtsEq… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.8 | docsIfMCmtsEqamGlobCfgDownSymbolRateM | 0 | 0 | The object for global configuration of Downstream channel Symbol M factor of the QAM channels in the containment tree of docsIfMCm… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.9 | docsIfMCmtsEqamGlobCfgDownSymbolRateN | 0 | 0 | The object for global configuration of Downstream channel Symbol M factor of the QAM channels in the containment tree of docsIfMCm… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.10 | docsIfMCmtsEqamGlobCfgDownLockParams | 0 | 0 | The object for global configuration of Downstream channel lock state of the PHY parameters of the QAM channels in the containment… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.13 | docsIfMCmtsEqamGlobCfgDownErrorsCount | 0 | 0 | The number of error cases where a QAM channel was not successfully set. This value starts counting at zero any time the global co… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.14 | docsIfMCmtsEqamGlobCfgDownRowStatus | 0 | 0 | The status of this conceptual table row entry. In order to create an entry the object docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUS… |