The status of this conceptual table row entry.
In order to create an entry the object
docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be set
This table has 'holes' for all the read-create' objects
not specified in the setup.
An entry is set to 'active' status if at least one
read-create object of the list below is set, otherwise,
the entry is in 'notReady' status.
docsIfMCmtsEqamGlobCfgDownBandwidth
docsIfMCmtsEqamGlobCfgDownPower
docsIfMCmtsEqamGlobCfgDownModulation
docsIfMCmtsEqamGlobCfgDownInterleave
docsIfMCmtsEqamGlogCfgDownAnnex
docsIfMCmtsEqamGlobCfgDownSymbolRateM
docsIfMCmtsEqamGlobCfgDownSymbolRateN
Once an entry is active the QAM channels associated to the
docsIfMCmtsEqamGlobCfgDownPhysicalIndex containment tree
are set to the parameters specified in the entry.
The Entry remains in 'active' row status and the execution
status is reported by
docsIfMCmtsEqamGlobCfgDownExecutionCode.
Setting a previously set object to a new value or
specifying an object not initially set during row creation,
sets the entry in row status 'notInService'. A set of this
object to 'active' triggers again the global configuration
action. As a rule, the EQAM device is not expected to track
old parameter values. Thus, the set to 'active' of the
entry performs the global set of all the old and new
parameters defined in the entry.
Due to the possible value 'notInService' as a valid
configuration state, this entry MUST NOT be aged out when
Row Status is 'notInService'.
The status of this conceptual table row entry.
In order to create an entry the object
docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be set
This table has 'holes' for all the read-create' objects
not specified in the setup.
An entry is set to 'active' status if at least one
read-create object of the list below is set, otherwise,
the entry is in 'notReady' status.
docsIfMCmtsEqamGlobCfgDownBandwidth
docsIfMCmtsEqamGlobCfgDownPower
docsIfMCmtsEqamGlobCfgDownModulation
docsIfMCmtsEqamGlobCfgDownInterleave
docsIfMCmtsEqamGlogCfgDownAnnex
docsIfMCmtsEqamGlobCfgDownSymbolRateM
docsIfMCmtsEqamGlobCfgDownSymbolRateN
Once an entry is active the QAM channels associated to the
docsIfMCmtsEqamGlobCfgDownPhysicalIndex containment tree
are set to the parameters specified in the entry.
The Entry remains in 'active' row status and the execution
status is reported by
docsIfMCmtsEqamGlobCfgDownExecutionCode.
Setting a previously set object to a new value or
specifying an object not initially set during row creation,
sets the entry in row status 'notInService'. A set of this
object to 'active' triggers again the global configuration
action. As a rule, the EQAM device is not expected to track
old parameter values. Thus, the set to 'active' of the
entry performs the global set of all the old and new
parameters defined in the entry.
Due to the possible value 'notInService' as a valid
configuration state, this entry MUST NOT be aged out when
Row Status is 'notInService'.
Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB
The status of this conceptual table row entry.
In order to create an entry the object
docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be set
This table has 'holes' for all the read-create' objects
not specified in the setup.
An entry is set to 'active' status if at least one
read-create object of the list below is set, otherwise,
the entry is in 'notReady' status.
docsIfMCmtsEqamGlobCfgDownBandwidth
docsIfMCmtsEqamGlobCfgDownPower
docsIfMCmtsEqamGlobCfgDownModulation
docsIfMCmtsEqamGlobCfgDownInterleave
docsIfMCmtsEqamGlogCfgDownAnnex
docsIfMCmtsEqamGlobCfgDownSymbolRateM
docsIfMCmtsEqamGlobCfgDownSymbolRateN
Once an entry is active the QAM channels associated to the
docsIfMCmtsEqamGlobCfgDownPhysicalIndex containment tree
are set to the parameters specified in the entry.
The Entry remains in 'active' row status and the execution
status is reported by
docsIfMCmtsEqamGlobCfgDownExecutionCode.
Setting a previously set object to a new value or
specifying an object not initially set during row creation,
sets the entry in row status 'notInService'. A set of this
object to 'active' triggers again the global configuration
action. As a rule, the EQAM device is not expected to track
old parameter values. Thus, the set to 'active' of the
entry performs the global set of all the old and new
parameters defined in the entry.
Due to the possible value 'notInService' as a valid
configuration state, this entry MUST NOT be aged out when
Row Status is 'notInService'.
docsIfMCmtsEqamGlobCfgDownRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this conceptual table row entry. In order to create an entry the object docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be set This table has 'holes' for all the read-create' objects not specified in the setup. An entry is set to 'active' status if at least one read-create object of the list below is set, otherwise, the entry is in 'notReady' status. docsIfMCmtsEqamGlobCfgDownBandwidth docsIfMCmtsEqamGlobCfgDownPower docsIfMCmtsEqamGlobCfgDownModulation docsIfMCmtsEqamGlobCfgDownInterleave docsIfMCmtsEqamGlogCfgDownAnnex docsIfMCmtsEqamGlobCfgDownSymbolRateM docsIfMCmtsEqamGlobCfgDownSymbolRateN Once an entry is active the QAM channels associated to the docsIfMCmtsEqamGlobCfgDownPhysicalIndex containment tree are set to the parameters specified in the entry. The Entry remains in 'active' row status and the execution status is reported by docsIfMCmtsEqamGlobCfgDownExecutionCode. Setting a previously set object to a new value or specifying an object not initially set during row creation, sets the entry in row status 'notInService'. A set of this object to 'active' triggers again the global configuration action. As a rule, the EQAM device is not expected to track old parameter values. Thus, the set to 'active' of the entry performs the global set of all the old and new parameters defined in the entry. Due to the possible value 'notInService' as a valid configuration state, this entry MUST NOT be aged out when Row Status is 'notInService'." ::= { docsIfMCmtsEqamGlobCfgDownEntry 14 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB
[Automatically extracted from oidview.com]
docsIfMCmtsEqamGlobCfgDownRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual table row entry. In order to create an entry the object docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be set This table has 'holes' for all the read-create' objects not specified in the setup. An entry is set to 'active' status if at least one read-create object of the list below is set, otherwise, the entry is in 'notReady' status. docsIfMCmtsEqamGlobCfgDownBandwidth docsIfMCmtsEqamGlobCfgDownPower docsIfMCmtsEqamGlobCfgDownModulation docsIfMCmtsEqamGlobCfgDownInterleave docsIfMCmtsEqamGlogCfgDownAnnex docsIfMCmtsEqamGlobCfgDownSymbolRateM docsIfMCmtsEqamGlobCfgDownSymbolRateN Once an entry is active the QAM channels associated to the docsIfMCmtsEqamGlobCfgDownPhysicalIndex containment tree are set to the parameters specified in the entry. The Entry remains in 'active' row status and the execution status is reported by docsIfMCmtsEqamGlobCfgDownExecutionCode. Setting a previously set object to a new value or specifying an object not initially set during row creation, sets the entry in row status 'notInService'. A set of this object to 'active' triggers again the global configuration action. As a rule, the EQAM device is not expected to track old parameter values. Thus, the set to 'active' of the entry performs the global set of all the old and new parameters defined in the entry. Due to the possible value 'notInService' as a valid configuration state, this entry MUST NOT be aged out when Row Status is 'notInService'." ::= { docsIfMCmtsEqamGlobCfgDownEntry 14 }
docsIfMCmtsEqamGlobCfgDownRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual table row entry. In order to create an entry the object docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be set This table has 'holes' for all the read-create' objects not specified in the setup. An entry is set to 'active' status if at least one read-create object of the list below is set, otherwise, the entry is in 'notReady' status. docsIfMCmtsEqamGlobCfgDownBandwidth docsIfMCmtsEqamGlobCfgDownPower docsIfMCmtsEqamGlobCfgDownModulation docsIfMCmtsEqamGlobCfgDownInterleave docsIfMCmtsEqamGlogCfgDownAnnex docsIfMCmtsEqamGlobCfgDownSymbolRateM docsIfMCmtsEqamGlobCfgDownSymbolRateN Once an entry is active the QAM channels associated to the docsIfMCmtsEqamGlobCfgDownPhysicalIndex containment tree are set to the parameters specified in the entry. The Entry remains in 'active' row status and the execution status is reported by docsIfMCmtsEqamGlobCfgDownExecutionCode. Setting a previously set object to a new value or specifying an object not initially set during row creation, sets the entry in row status 'notInService'. A set of this object to 'active' triggers again the global configuration action. As a rule, the EQAM device is not expected to track old parameter values. Thus, the set to 'active' of the entry performs the global set of all the old and new parameters defined in the entry. Due to the possible value 'notInService' as a valid configuration state, this entry MUST NOT be aged out when Row Status is 'notInService'." ::= { docsIfMCmtsEqamGlobCfgDownEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.1 | docsIfMCmtsEqamGlobCfgDownIndex | 0 | 0 | The unique identifier of entries in this table. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.2 | docsIfMCmtsEqamGlobCfgDownPhysicalIndex | 0 | 0 | The ENTITY-MIB Physical Index that includes the QAM channels associated to the global parameter being set. The QAM Channels cover… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.3 | docsIfMCmtsEqamGlobCfgDownBandwidth | 0 | 0 | The object for global configuration of Downstream channel bandwidth of the QAM channels in the containment tree of docsIfMCmtsEqa… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.4 | docsIfMCmtsEqamGlobCfgDownPower | 0 | 0 | The object for global configuration of Downstream channel Power Level of the QAM channels in the containment tree of docsIfMCmtsE… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.5 | docsIfMCmtsEqamGlobCfgDownModulation | 0 | 0 | The object for global configuration of Downstream channel modulation of the QAM channels in the containment tree of docsIfMCmtsEq… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.6 | docsIfMCmtsEqamGlobCfgDownInterleave | 0 | 0 | The object for global configuration of Downstream channel interleave of the QAM channels in the containment tree of docsIfMCmtsEq… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.7 | docsIfMCmtsEqamGlogCfgDownAnnex | 0 | 0 | The object for global configuration of Downstream channel J.83 Annex of the QAM channels in the containment tree of docsIfMCmtsEq… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.8 | docsIfMCmtsEqamGlobCfgDownSymbolRateM | 0 | 0 | The object for global configuration of Downstream channel Symbol M factor of the QAM channels in the containment tree of docsIfMCm… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.9 | docsIfMCmtsEqamGlobCfgDownSymbolRateN | 0 | 0 | The object for global configuration of Downstream channel Symbol M factor of the QAM channels in the containment tree of docsIfMCm… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.10 | docsIfMCmtsEqamGlobCfgDownLockParams | 0 | 0 | The object for global configuration of Downstream channel lock state of the PHY parameters of the QAM channels in the containment… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.12 | docsIfMCmtsEqamGlobCfgDownExecutionCode | 0 | 0 | Indicates the status of the global configuration entry execution. If different than 'none', represents the last error condition p… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.13 | docsIfMCmtsEqamGlobCfgDownErrorsCount | 0 | 0 | The number of error cases where a QAM channel was not successfully set. This value starts counting at zero any time the global co… |