Supports filter set prioritization when
multiple filters sets may be associated with
an entity (e.g., user, interface) but only
one can be applied at the given time. The
set with a higher priority value will take
precedence and supercede the set with a
lower priority value. When priority values
are equal, no filter set update will occur.
Consulted only when an entity/filter set
conflict needs resolution.
Parsed from file pibNtnEvol_004.mib.txt
Company: baynetworks
Module: NTN-QOS-POLICY-EVOL-PIB
Vendor: Avaya
Module: NTN-QOS-POLICY-EVOL-PIB (NTN-QOS-POLICY-EVOL-PIB.mib)
Type: TABULAR
Access: read-create
Syntax: Unsigned32
(
1..255 )
Automatically extracted from www.mibdepot.com
ntnQosAccessAsgnSetPriority OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Supports filter set prioritization when multiple filters sets may be associated with an entity (e.g., user, interface) but only one can be applied at the given time. The set with a higher priority value will take precedence and supercede the set with a lower priority value. When priority values are equal, no filter set update will occur. Consulted only when an entity/filter set conflict needs resolution." DEFVAL { 1 } ::= { ntnQosAccessAsgnEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.13.6.1.1 | ntnQosAccessAsgnId | 0 | 0 | An index that enumerates the access assignment entries. Managers can obtain new values for row creation in this table by reading … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.2 | ntnQosAccessAsgnAclType | 0 | 0 | Identifies the type of access element that is being referenced. |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.3 | ntnQosAccessAsgnName | 0 | 0 | A label used to reference an access assignment in a textual manner. This label, coupled with the access element type identifier a… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.4 | ntnQosAccessAsgnIfIndex | 0 | 0 | The interface to which the identified access element is to be applied, specified in terms of an ifIndex value. A value of 0 indica… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.5 | ntnQosAccessAsgnRate | 0 | 0 | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: CIR for Simple Token Bucket CIR in RFC 2697 for … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.6 | ntnQosAccessAsgnBurstSize | 0 | 0 | The maximum number of bytes in a single transmission burst. This attribute is used for: Token bucket size for Simple Token Bucket C… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.7 | ntnQosAccessAsgnOutActionDrop | 0 | 0 | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.8 | ntnQosAccessAsgnOutActionRemarkDscp | 0 | 0 | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated I… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.9 | ntnQosAccessAsgnOutActionRemarkCos | 0 | 0 | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deeme… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.10 | ntnQosAccessAsgnOutActionSetPrec | 0 | 0 | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop pre… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.11 | ntnQosAccessAsgnStatsType | 0 | 0 | The type of statistics tracking used by this access assignment. The value of this attribute dictates the amount of statistics tra… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.12 | ntnQosAccessAsgnStorage | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.13 | ntnQosAccessAsgnStatus | 0 | 0 | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.14 | ntnQosAccessAsgnNonMatchActionDrop | 0 | 0 | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.15 | ntnQosAccessAsgnMeterType | 0 | 0 | The metering algorithm associated with the rate and burst parameters. The number and type of algorithms supported is implementatio… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.16 | ntnQosAccessAsgnSecondaryRate | 0 | 0 | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: PIR in RFC 2698 for trTCM A rate value equal to … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.17 | ntnQosAccessAsgnSecondaryBurstSize | 0 | 0 | The maximum number of bytes in a single transmission burst. This attribute is used for: EBS in RFC 2697 for srTCM PBS in RFC 2698 f… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.18 | ntnQosAccessAsgnYelActionDrop | 0 | 0 | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.19 | ntnQosAccessAsgnYelActionRemarkDscp | 0 | 0 | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated I… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.20 | ntnQosAccessAsgnYelActionRemarkCos | 0 | 0 | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deeme… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.21 | ntnQosAccessAsgnYelActionSetPrec | 0 | 0 | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop pre… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.23 | ntnQosAccessAsgnMeteringMode | 0 | 0 | Identifies the metering mode requested for the identified filter set. A value of 'noMetering(1)' indicates that metering is not re… |