OID reference

optApsConfigSwitchReason

1.3.6.1.4.1.4515.1.11.1.1.1.18

Description

The reason why APS switch happened. When the working connection on one end fails, its other end is told to do an APS switch. The following options in the increasing order of priority indicate what type of switch request it is. optApsRevertive : Switch back to working connection after the Wait-to-Restore interval is ov…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.4515.1.11.1.1.1 (optApsConfigEntry, optXpdConnConfigEntry)
Node code
18
Node name
optApsConfigSwitchReason
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.4515.1.11.1.1.1.18
URN notation
urn:oid:1.3.6.1.4.1.4515.1.11.1.1.1.18
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 4515 1 11 1 1 1 18}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOptApsMib(11) slOptApsConfig(1) optApsConfigTable(1) optApsConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOptApsMib(11) slOptApsConfig(1) optApsConfigTable(1) optXpdConnConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOptApsMib(11) slOptApsConfig(1) optXpdConnConfigTable(1) optApsConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOptApsMib(11) slOptApsConfig(1) optXpdConnConfigTable(1) optXpdConnConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOptApsMib(11) slOptConn(1) optApsConfigTable(1) optApsConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOptApsMib(11) slOptConn(1) optApsConfigTable(1) optXpdConnConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOptApsMib(11) slOptConn(1) optXpdConnConfigTable(1) optApsConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOptApsMib(11) slOptConn(1) optXpdConnConfigTable(1) optXpdConnConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOpt(11) slOptApsConfig(1) optApsConfigTable(1) optApsConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOpt(11) slOptApsConfig(1) optApsConfigTable(1) optXpdConnConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOpt(11) slOptApsConfig(1) optXpdConnConfigTable(1) optApsConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOpt(11) slOptApsConfig(1) optXpdConnConfigTable(1) optXpdConnConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOpt(11) slOptConn(1) optApsConfigTable(1) optApsConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOpt(11) slOptConn(1) optApsConfigTable(1) optXpdConnConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOpt(11) slOptConn(1) optXpdConnConfigTable(1) optApsConfigEntry(1) optApsConfigSwitchReason(18)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) packetlight(4515) sitelight(1) slOpt(11) slOptConn(1) optXpdConnConfigTable(1) optXpdConnConfigEntry(1) optApsConfigSwitchReason(18)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/4515/1/11/1/1/1/18
  • /ISO/Identified-Organization/6/1/4/1/4515/1/11/1/1/1/18
  • /ISO/3/6/1/4/1/4515/1/11/1/1/1/18
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOptApsMib/slOptApsConfig/optApsConfigTable/optApsConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOptApsMib/slOptApsConfig/optApsConfigTable/optXpdConnConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOptApsMib/slOptApsConfig/optXpdConnConfigTable/optApsConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOptApsMib/slOptApsConfig/optXpdConnConfigTable/optXpdConnConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOptApsMib/slOptConn/optApsConfigTable/optApsConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOptApsMib/slOptConn/optApsConfigTable/optXpdConnConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOptApsMib/slOptConn/optXpdConnConfigTable/optApsConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOptApsMib/slOptConn/optXpdConnConfigTable/optXpdConnConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOpt/slOptApsConfig/optApsConfigTable/optApsConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOpt/slOptApsConfig/optApsConfigTable/optXpdConnConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOpt/slOptApsConfig/optXpdConnConfigTable/optApsConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOpt/slOptApsConfig/optXpdConnConfigTable/optXpdConnConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOpt/slOptConn/optApsConfigTable/optApsConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOpt/slOptConn/optApsConfigTable/optXpdConnConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOpt/slOptConn/optXpdConnConfigTable/optApsConfigEntry/optApsConfigSwitchReason
  • /iso/identified-organization/dod/internet/private/enterprise/4515/sitelight/slOpt/slOptConn/optXpdConnConfigTable/optXpdConnConfigEntry/optApsConfigSwitchReason
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Enumerated values

ValueName
1optApsOther
2optApsRevertive
3optApsManual
4optApsSignalFailure
5optApsForceSwitch
6optApsLockOut

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: optApsConfigUserWorkingIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4515.1.11.1.1.1.18

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

optApsConfigSwitchReason · current

optApsConfigSwitchReason OBJECT-TYPE
      SYNTAX INTEGER {
            optApsOther(1),
            optApsRevertive(2),
            optApsManual(3),
            optApsSignalFailure(4),
            optApsForceSwitch(5),
            optApsLockOut(6)
		}
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
          "The reason why APS switch happened. When the working
           connection on one end fails, its other end is told to do
           an  APS switch. The following options in the increasing
           order of priority indicate what type of switch request 
           it is. 

          optApsRevertive : Switch back to working connection after the 
            Wait-to-Restore interval is over, and failures are 
            cleared. It is the lowest priority.
          optApsManual : Manual switch causes APS switch unless a 
            request of equal or higher priority is in effect.
          optApsSignalFailureHigh : switch occured due to SD failure. 
          optApsForceSwitch : Forced switch forces hardware to switch
            the active connection even if the other connection (could be 
            working connection or protection connection) is in alarm.
          optApsLockOut : This is the highest priority switch. This
            will override all other requests. 
          optApsLockOut :  indicates that the last switchover to the 
            working occurred because of protection lockout."      
      ::= { optApsConfigEntry 18 }

optApsConfigSwitchReason · current

optApsConfigSwitchReason OBJECT-TYPE
      SYNTAX INTEGER {
            optApsOther(1),
            optApsRevertive(2),
            optApsManual(3),
            optApsSignalFailure(4),
            optApsForceSwitch(5),
            optApsLockOut(6)
		}
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
          "The reason why APS switch happened. When the working
           connection on one end fails, its other end is told to do
           an  APS switch. The following options in the increasing
           order of priority indicate what type of switch request 
           it is. 

          optApsRevertive : Switch back to working connection after the 
            Wait-to-Restore interval is over, and failures are 
            cleared. It is the lowest priority.
          optApsManual : Manual switch causes APS switch unless a 
            request of equal or higher priority is in effect.
          optApsSignalFailureHigh : switch occured due to SD failure. 
          optApsForceSwitch : Forced switch forces hardware to switch
            the active connection even if the other connection (could be 
            working connection or protection connection) is in alarm.
          optApsLockOut : This is the highest priority switch. This
            will override all other requests. 
          optApsLockOut :  indicates that the last switchover to the 
            working occurred because of protection lockout."      
      ::= { optApsConfigEntry 18 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The reason why APS switch happened. When the working connection on one end fails, its other end is told to do an APS switch. The following options in the increasing order of priority indicate what type of switch request it is. optApsRevertive : Switch back to working connection after the Wait-to-Restore interval is over, and failures are cleared. It is the lowest priority. optApsManual : Manual switch causes APS switch unless a request of equal or higher priority is in effect. optApsSignalFailureHigh : switch occured due to SD failure. optApsForceSwitch : Forced switch forces hardware to switch the active connection even if the other connection (could be working connection or protection connection) is in alarm. optApsLockOut : This is the highest priority switch. This will override all other requests. optApsLockOut : indicates that the last switchover to the working occurred because of protection lockout.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 2 sources

Description 1

optApsConfigSwitchReason · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)2 sources

Status in source: current.

Names: optApsConfigSwitchReason

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "optApsConfigSwitchReason",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "optApsOther",
    "(",
    "1",
    ")",
    ",",
    "optApsRevertive",
    "(",
    "2",
    ")",
    ",",
    "optApsManual",
    "(",
    "3",
    ")",
    ",",
    "optApsSignalFailure",
    "(",
    "4",
    ")",
    ",",
    "optApsForceSwitch",
    "(",
    "5",
    ")",
    ",",
    "optApsLockOut",
    "(",
    "6",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The reason why APS switch happened. When the working connection on one end fails, its other end is told to do an APS switch. The following options in the increasing order of priority indicate what type of switch request it is. optApsRevertive : Switch back to working connection after the Wait-to-Restore interval is over, and failures are cleared. It is the lowest priority. optApsManual : Manual switch causes APS switch unless a request of equal or higher priority is in effect. optApsSignalFailureHigh : switch occured due to SD failure. optApsForceSwitch : Forced switch forces hardware to switch the active connection even if the other connection (could be working connection or protection connection) is in alarm. optApsLockOut : This is the highest priority switch. This will override all other requests. optApsLockOut : indicates that the last switchover to the working occurred because of protection lockout.\"",
    "::=",
    "{",
    "optApsConfigEntry",
    "18",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "optApsOther",
            1
          ],
          [
            "optApsRevertive",
            2
          ],
          [
            "optApsManual",
            3
          ],
          [
            "optApsSignalFailure",
            4
          ],
          [
            "optApsForceSwitch",
            5
          ],
          [
            "optApsLockOut",
            6
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The reason why APS switch happened. When the working connection on one end fails, its other end is told to do an APS switch. The following options in the increasing order of priority indicate what type of switch request it is. optApsRevertive : Switch back to working connection after the Wait-to-Restore interval is over, and failures are cleared. It is the lowest priority. optApsManual : Manual switch causes APS switch unless a request of equal or higher priority is in effect. optApsSignalFailureHigh : switch occured due to SD failure. optApsForceSwitch : Forced switch forces hardware to switch the active connection even if the other connection (could be working connection or protection connection) is in alarm. optApsLockOut : This is the highest priority switch. This will override all other requests. optApsLockOut : indicates that the last switchover to the working occurred because of protection lockout."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.4515)

Viner Omri

Siblings (21)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.4515.1.11.1.1.1.1 optApsConfigUserWorkingIndex, optXpdConnConfigIngressIf00
1.3.6.1.4.1.4515.1.11.1.1.1.2 optApsConfigNetWorkingIndex, optXpdConnConfigEgressIf00
1.3.6.1.4.1.4515.1.11.1.1.1.3 optApsConfigUserProtectingIndex, optXpdConnConfigRateControlAdmin00
1.3.6.1.4.1.4515.1.11.1.1.1.4 optApsConfigNetProtectingIndex, optXpdConnConfigRateControlOper00
1.3.6.1.4.1.4515.1.11.1.1.1.5 optApsConfigScheme, optXpdConnConfigRowStatus00
1.3.6.1.4.1.4515.1.11.1.1.1.6 optApsConfigEnable, optXpdConnConfigLosPropagation00
1.3.6.1.4.1.4515.1.11.1.1.1.7 optApsConfigArchMode, optXpdConnSonetRate00
1.3.6.1.4.1.4515.1.11.1.1.1.8 optApsConfigActiveConnectionRx00
1.3.6.1.4.1.4515.1.11.1.1.1.9 optApsConfigActiveConnectionTx00
1.3.6.1.4.1.4515.1.11.1.1.1.10 optApsConfigWaitToRestore00
1.3.6.1.4.1.4515.1.11.1.1.1.11 optApsConfigDirection00
1.3.6.1.4.1.4515.1.11.1.1.1.12 optApsConfigRevertive00
1.3.6.1.4.1.4515.1.11.1.1.1.13 optApsConfigChanStatus00
1.3.6.1.4.1.4515.1.11.1.1.1.14 optApsConfigChanSignalFailures00
1.3.6.1.4.1.4515.1.11.1.1.1.15 optApsConfigChanSwitchovers00
1.3.6.1.4.1.4515.1.11.1.1.1.16 optApsConfigChanLastSwitchover00
1.3.6.1.4.1.4515.1.11.1.1.1.17 optApsConfigSwitchCommand00
1.3.6.1.4.1.4515.1.11.1.1.1.19 optApsConfigResetCounters00
1.3.6.1.4.1.4515.1.11.1.1.1.20 optApsConfigActiveRequest00
1.3.6.1.4.1.4515.1.11.1.1.1.21 optApsConfigStatus00
1.3.6.1.4.1.4515.1.11.1.1.1.22 optApsConfigLosThreshold00