Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"optApsConfigActiveRequest",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"optApsOther",
"(",
"1",
")",
",",
"optApsRevertive",
"(",
"2",
")",
",",
"optApsManual",
"(",
"3",
")",
",",
"optApsSignalFailure",
"(",
"4",
")",
",",
"optApsForceSwitch",
"(",
"5",
")",
",",
"optApsLockOut",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The Active Switch APS request: optApsRevertive : Switch back to working connection after the Wait-to-Restore interval is over, and failures are cleared. It is the lowest priority. optApsManual : Manual switch causes APS switch unless a request of equal or higher priority is in effect. optApsSignalFailure : Switch due to signal failure. optApsForceSwitch : Forced switch forces hardware to switch the active connection even if the other connection (could be working connection or protection connection) is in alarm. optApsLockOut : This is the highest priority switch. This will override all other requests. optApsLockOut : indicates that the last switchover to the working occurred because of protection lockout.\"",
"::=",
"{",
"optApsConfigEntry",
"20",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"optApsOther",
1
],
[
"optApsRevertive",
2
],
[
"optApsManual",
3
],
[
"optApsSignalFailure",
4
],
[
"optApsForceSwitch",
5
],
[
"optApsLockOut",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The Active Switch APS request: optApsRevertive : Switch back to working connection after the Wait-to-Restore interval is over, and failures are cleared. It is the lowest priority. optApsManual : Manual switch causes APS switch unless a request of equal or higher priority is in effect. optApsSignalFailure : Switch due to signal failure. optApsForceSwitch : Forced switch forces hardware to switch the active connection even if the other connection (could be working connection or protection connection) is in alarm. optApsLockOut : This is the highest priority switch. This will override all other requests. optApsLockOut : indicates that the last switchover to the working occurred because of protection lockout."
],
null,
null,
null,
null
]
}