When this object is set to the value of open(2),
the station should go into the open state. The
progress and success of the open is given by the
values of the objects dot5RingState and
dot5RingOpenStatus.
When this object is set to the value of
reset(3), then the station should do a reset.
On a reset, all MIB counters should retain their
values, if possible. Other side affects are
dependent on the hardware chip set.
When this object is set to the value of
close(4), the station should go into the stopped
state by removing itself from the ring.
Setting this object to a value of no-op(1)
has no effect.
When read, this object always has a value
of no-op(1).
Parsed from file isd_mib.txt
Company: None
Module: CHIPCOMMIB
When this object is set to the value of open(2),
the station should go into the open state. The
progress and success of the open is given by the
values of the objects expDot5RingState and
expDot5RingOpenStatus.
When this object is set to the value of
reset(3), then the station should do a reset.
On a reset, all MIB counters should retain their
values, if possible. Other side affects are
dependent on the hardware chip set.
When this object is set to the value of
close(4), the station should go into the stopped
state by removing itself from the ring.
Setting this object to a value of no-op(1)
has no effect.
When read, this object always has a value
of no-op(1).
Parsed from file CHIPCOMMIB.mib
Module: CHIPCOMMIB
Vendor: Chippcom
Module: CHIPCOMMIB
[Automatically extracted from oidview.com]
dot5Commands OBJECT-TYPE SYNTAX INTEGER { no-op(1), open(2), reset(3), close(4) } ACCESS read-write STATUS mandatory DESCRIPTION " When this object is set to the value of open(2), the station should go into the open state. The progress and success of the open is given by the values of the objects dot5RingState and dot5RingOpenStatus. When this object is set to the value of reset(3), then the station should do a reset. On a reset, all MIB counters should retain their values, if possible. Other side affects are dependent on the hardware chip set. When this object is set to the value of close(4), the station should go into the stopped state by removing itself from the ring. Setting this object to a value of no-op(1) has no effect. When read, this object always has a value of no-op(1)." ::= { dot5Entry 2 }
expDot5Commands OBJECT-TYPE SYNTAX INTEGER { no-op(1), open(2), reset(3), close(4) } ACCESS read-write STATUS obsolete DESCRIPTION " When this object is set to the value of open(2), the station should go into the open state. The progress and success of the open is given by the values of the objects expDot5RingState and expDot5RingOpenStatus. When this object is set to the value of reset(3), then the station should do a reset. On a reset, all MIB counters should retain their values, if possible. Other side affects are dependent on the hardware chip set. When this object is set to the value of close(4), the station should go into the stopped state by removing itself from the ring. Setting this object to a value of no-op(1) has no effect. When read, this object always has a value of no-op(1)." ::= { expDot5Entry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.49.2.4.1.1.1.1.1 | expDot5IfIndex, dot5IfIndex | 0 | 0 | The value of this object identifies the 802.5 interface for which this entry contains management information. The value of this o… |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.3 | expDot5RingStatus, dot5RingStatus | 0 | 0 | The current interface status which can be used to diagnose fluctuating problems that can occur on token rings, after a station ha… |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.4 | expDot5RingState, dot5RingState | 0 | 0 | The current interface state with respect to entering or leaving the ring. |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.5 | expDot5RingOpenStatus, dot5RingOpenStatus | 0 | 0 | This object indicates the success, or the reason for failure, of the station's most recent attempt to enter the ring. |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.6 | expDot5RingSpeed, dot5RingSpeed | 0 | 0 | The ring's bandwidth. |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.7 | expDot5UpStream, dot5UpStream | 0 | 0 | The MAC-address of the up stream neighbor station in the ring. |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.8 | expDot5ActMonParticipate, dot5ActMonParticipate | 0 | 0 | If this object has a value of true(1) then this interface will participate in the active monitor selection process. If the value… |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.9 | expDot5Functional, dot5Functional | 0 | 0 | The bit mask of all Token Ring functional addresses for which this interface will accept frames. |