The current interface status which can be used
to diagnose fluctuating problems that can occur
on token rings, after a station has successfully
been added to the ring.
Before an open is completed, this object has
the value for the 'no status' condition. The
dot5RingState and dot5RingOpenStatus objects
provide for debugging problems when the station
can not even enter the ring.
The object's value is a sum of values, one
for each currently applicable condition. The
following values are defined for various
conditions:
0 = No Problems detected
32 = Ring Recovery
64 = Single Station
256 = Remove Received
512 = reserved
1024 = Auto-Removal Error
2048 = Lobe Wire Fault
4096 = Transmit Beacon
8192 = Soft Error
16384 = Hard Error
32768 = Signal Loss
131072 = no status, open not completed.
Parsed from file isd_mib.txt
Company: None
Module: CHIPCOMMIB
The current interface status which can be used
to diagnose fluctuating problems that can occur
on token rings, after a station has successfully
been added to the ring.
Before an open is completed, this object has
the value for the 'no status' condition. The
expDot5RingState and expDot5RingOpenStatus objects
provide for debugging problems when the station
can not even enter the ring.
The object's value is a sum of values, one
for each currently applicable condition. The
following values are defined for various
conditions:
0 = No Problems detected
32 = Ring Recovery
64 = Single Station
256 = Remove Received
512 = reserved
1024 = Auto-Removal Error
2048 = Lobe Wire Fault
4096 = Transmit Beacon
8192 = Soft Error
16384 = Hard Error
32768 = Signal Loss
131072 = no status, open not completed.
Parsed from file CHIPCOMMIB.mib
Module: CHIPCOMMIB
Vendor: Chippcom
Module: CHIPCOMMIB
[Automatically extracted from oidview.com]
dot5RingStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The current interface status which can be used to diagnose fluctuating problems that can occur on token rings, after a station has successfully been added to the ring. Before an open is completed, this object has the value for the 'no status' condition. The dot5RingState and dot5RingOpenStatus objects provide for debugging problems when the station can not even enter the ring. The object's value is a sum of values, one for each currently applicable condition. The following values are defined for various conditions: 0 = No Problems detected 32 = Ring Recovery 64 = Single Station 256 = Remove Received 512 = reserved 1024 = Auto-Removal Error 2048 = Lobe Wire Fault 4096 = Transmit Beacon 8192 = Soft Error 16384 = Hard Error 32768 = Signal Loss 131072 = no status, open not completed." ::= { dot5Entry 3 }
expDot5RingStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION " The current interface status which can be used to diagnose fluctuating problems that can occur on token rings, after a station has successfully been added to the ring. Before an open is completed, this object has the value for the 'no status' condition. The expDot5RingState and expDot5RingOpenStatus objects provide for debugging problems when the station can not even enter the ring. The object's value is a sum of values, one for each currently applicable condition. The following values are defined for various conditions: 0 = No Problems detected 32 = Ring Recovery 64 = Single Station 256 = Remove Received 512 = reserved 1024 = Auto-Removal Error 2048 = Lobe Wire Fault 4096 = Transmit Beacon 8192 = Soft Error 16384 = Hard Error 32768 = Signal Loss 131072 = no status, open not completed." ::= { expDot5Entry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.49.2.4.1.1.1.1.1 | expDot5IfIndex, dot5IfIndex | 0 | 0 | The value of this object identifies the 802.5 interface for which this entry contains management information. The value of this o… |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.2 | expDot5Commands, dot5Commands | 0 | 0 | When this object is set to the value of open(2), the station should go into the open state. The progress and success of the open… |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.4 | expDot5RingState, dot5RingState | 0 | 0 | The current interface state with respect to entering or leaving the ring. |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.5 | expDot5RingOpenStatus, dot5RingOpenStatus | 0 | 0 | This object indicates the success, or the reason for failure, of the station's most recent attempt to enter the ring. |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.6 | expDot5RingSpeed, dot5RingSpeed | 0 | 0 | The ring's bandwidth. |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.7 | expDot5UpStream, dot5UpStream | 0 | 0 | The MAC-address of the up stream neighbor station in the ring. |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.8 | expDot5ActMonParticipate, dot5ActMonParticipate | 0 | 0 | If this object has a value of true(1) then this interface will participate in the active monitor selection process. If the value… |
| 1.3.6.1.4.1.49.2.4.1.1.1.1.9 | expDot5Functional, dot5Functional | 0 | 0 | The bit mask of all Token Ring functional addresses for which this interface will accept frames. |