The state of the port, is it having normal or stormed broad cast traffic.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Alcatel-Lucent Enterprise MIB copies (LibreNMS)
OID reference
1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.38
The state of the port, is it having normal or stormed broad cast traffic.
Identification
{1 3 6 1 4 1 6486 800 1 2 1 5 1 1 2 1 1 38}
| Value | Name |
|---|---|
| 0 | normal |
| 1 | storm |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.38
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
esmPortFlood OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
storm(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the port, is it having normal or stormed broad
cast traffic."
::= { esmConfEntry 38}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The state of the port, is it having normal or stormed broad cast traffic.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Alcatel-Lucent Enterprise MIB copies (LibreNMS)
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: current.
Names: esmPortFlood
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"esmPortFlood",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"normal",
"(",
"0",
")",
",",
"storm",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The state of the port, is it having normal or stormed broad cast traffic.\"",
"::=",
"{",
"esmConfEntry",
"38",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"normal",
0
],
[
"storm",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The state of the port, is it having normal or stormed broad cast traffic."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. Alcatel-Lucent Enterprise support.
Module: ALCATEL-IND1-PORT-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'ifInErrors', 'ifOutErrors', 'InterfaceIndex'], 'SNMPv2-TC': ['TimeStamp', 'RowStatus', 'DateAndTime', 'TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Counter64', 'Unsigned32', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'ALCATEL-IND1-BASE': ['softentIND1Port', 'cmmEsmDrvTraps'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: ALCATEL-IND1-PORT-MIB
{'IF-MIB': ['ifIndex', 'ifInErrors', 'ifOutErrors', 'InterfaceIndex'], 'SNMPv2-TC': ['TimeStamp', 'RowStatus', 'DateAndTime', 'TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Counter64', 'Unsigned32', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'ALCATEL-IND1-BASE': ['softentIND1Port', 'cmmEsmDrvTraps'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.1 | esmPortSlot | 0 | 0 | The physical Slot number for this Ethernet Port. Slot number has been added to be used by the private Trap. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.2 | esmPortIF | 0 | 0 | The on-board interface number for this Ethernet Port. Port Number has been added to be used by the private Trap. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.3 | esmPortAutoSpeed | 0 | 0 | The automatically detected port line speed of this ESM port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.4 | esmPortAutoDuplexMode | 0 | 0 | The automatically detected port duplex mode of this ESM port. Note: GigaEthernet supports only Full duplex mode. Default value for… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.5 | esmPortCfgSpeed | 0 | 0 | The configured port line speed of this ESM port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.6 | esmPortCfgDuplexMode | 0 | 0 | The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.7 | esmPortCfgIFG | 0 | 0 | Contains the setting of Inter-Frame Gap (IFG), in bytes for receive and transmit. The range is from 9 to 12 bytes. Note: The defau… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.8 | esmPortPauseSlotTime | 0 | 0 | Indicates the number of microseconds the other end-station waits after the reception of a pause frame. Note: Pause Flow control is… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.9 | esmPortMaxFloodRate | 0 | 0 | Broadcast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.10 | esmPortFloodMcastEnable | 0 | 0 | Enable/disable the maximum flood rate for multicast. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.11 | esmPortCfgMaxFrameSize | 0 | 0 | Configure the value of the maximum frame size allow. For 10/100: It is a range between 1518(untagged) and 1553 bytes. For GigaEther… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.12 | esmPortCfgLongEnable | 0 | 0 | Allow the user to change the maximun Frame size. Note: It is not configurable for 10/100 Ethernet port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.13 | esmPortCfgRuntEnable | 0 | 0 | Allow the user to change the minimum Frame size. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.14 | esmPortCfgRuntSize | 0 | 0 | Configure the value of the minimum frame size allow per ports. The range is 0 to 64. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.15 | esmPortCfgAutoNegotiation | 0 | 0 | Allow the user to enable or disable the port auto negotiation. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.16 | esmPortCfgCrossover | 0 | 0 | Allow the user to configure port crossover. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.17 | esmPortCfgFlow | 0 | 0 | Use the dot3PauseAdminMode from the standard MIB to configure the flow control. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.18 | esmPortCfgHybridActiveType | 0 | 0 | This object is only applicable to hybrid ports . It indicates configured active media type.(the operational media type may be dif… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.19 | esmPortCfgHybridMode | 0 | 0 | This object is only applicable to hybrid ports. This allows the user the user to configure the media type with which the port sho… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.20 | esmPortOperationalHybridType | 0 | 0 | This object is only applicable to hybrid ports . It indicates the actual media type that has link up and is or will be passing t… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.21 | esmPortCfgMMULowWaterMarkCellSetLimit | 0 | 0 | Per-port-per-CoS Head of Line blocking cell limits. Range is 0 - 16383 Firebolt register Offset: 0x006pp30 - 0x37 Bits: 13:0 Cell… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.22 | esmPortCfgMMUDynamicCellSetLimit | 0 | 0 | Per-egress port cell-based dynamic (shared buffer pool) memory usage drop and resume thresholds. This sets the limit for which th… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.23 | esmPortViolationBitMap | 0 | 0 | A bit map that identifies the set of Application that have blocked a port as a result of a particular violation |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.24 | esmPortViolationClearAll | 0 | 0 | Clear all port vioaltion |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.25 | esmPortFloodBcastEnable | 0 | 0 | Enable/disable the maximum flood rate for Broadcast. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.26 | esmPortFloodUnknownUcastEnable | 0 | 0 | Enable/disable the maximum flood rate for unknown unicast. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.27 | esmPortMaxUnknownUcastFloodRate | 0 | 0 | Unknown-Unicast flood threshold type. To set the type, set esmPortMaxUnknownUcastFloodRateLimit also |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.28 | esmPortMaxMcastFloodRate | 0 | 0 | Multicast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.29 | esmPortMaxFloodRateLimit | 0 | 0 | The value of the maximum broadcast flood limit. The actual range of the flood limit depends on the port speed. example: Percentage… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.30 | esmPortMaxUnknownUcastFloodRateLimit | 0 | 0 | The value of the maximum unknown-unicast flood limit The actual range of the flood limit depends on the port speed. example: Perce… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.31 | esmPortMaxMcastFloodRateLimit | 0 | 0 | The value of the maximum multicast flood limit The actual range of the flood limit depends on the port speed. example: Percentage:… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.32 | esmPortCfgSFPType | 0 | 0 | This object is only applicable to fiber ports. The string indicates the type of SFP/GBIC of active media. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.33 | esmPortWaitToRestoreTimer | 0 | 0 | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.34 | esmPortMinFloodRateLimit | 0 | 0 | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.35 | esmPortMinMcastFloodRateLimit | 0 | 0 | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.36 | esmPortFloodThresholdAction | 0 | 0 | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.37 | esmPortMcastThresholdAction | 0 | 0 | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.39 | esmPortMCastStorm | 0 | 0 | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.40 | esmPortCfgEeeStatus | 0 | 0 | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.41 | esmPortCfgEeeAutoNegState | 0 | 0 | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.42 | esmPortCfgEeeCapability | 0 | 0 |