| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.1 |
esmPortSlot | 0 | 0 |
The physical Slot number for this Ethernet Port. Slot number has been added to be used by the private Trap. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.2 |
esmPortIF | 0 | 0 |
The on-board interface number for this Ethernet Port. Port Number has been added to be used by the private Trap. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.3 |
esmPortAutoSpeed | 0 | 0 |
The automatically detected port line speed of this ESM port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.4 |
esmPortAutoDuplexMode | 0 | 0 |
The automatically detected port duplex mode of this ESM port.
Note: GigaEthernet supports only Full duplex mode. Default value for… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.6 |
esmPortCfgDuplexMode | 0 | 0 |
The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.7 |
esmPortCfgIFG | 0 | 0 |
Contains the setting of Inter-Frame Gap (IFG), in bytes for receive and transmit. The range is from 9 to 12 bytes.
Note: The defau… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.8 |
esmPortPauseSlotTime | 0 | 0 |
Indicates the number of microseconds the other end-station waits after the reception of a pause frame.
Note: Pause Flow control is… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.9 |
esmPortMaxFloodRate | 0 | 0 |
Broadcast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.10 |
esmPortFloodMcastEnable | 0 | 0 |
Enable/disable the maximum flood rate for multicast. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.11 |
esmPortCfgMaxFrameSize | 0 | 0 |
Configure the value of the maximum frame size allow. For 10/100: It is a range between 1518(untagged) and 1553 bytes. For GigaEther… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.12 |
esmPortCfgLongEnable | 0 | 0 |
Allow the user to change the maximun Frame size. Note: It is not configurable for 10/100 Ethernet port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.13 |
esmPortCfgRuntEnable | 0 | 0 |
Allow the user to change the minimum Frame size. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.14 |
esmPortCfgRuntSize | 0 | 0 |
Configure the value of the minimum frame size allow per ports. The range is 0 to 64. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.15 |
esmPortCfgAutoNegotiation | 0 | 0 |
Allow the user to enable or disable the port auto negotiation. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.16 |
esmPortCfgCrossover | 0 | 0 |
Allow the user to configure port crossover. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.17 |
esmPortCfgFlow | 0 | 0 |
Use the dot3PauseAdminMode from the standard MIB to configure the flow control. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.18 |
esmPortCfgHybridActiveType | 0 | 0 |
This object is only applicable to hybrid ports . It indicates configured active media type.(the operational media type may be dif… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.19 |
esmPortCfgHybridMode | 0 | 0 |
This object is only applicable to hybrid ports. This allows the user the user to configure the media type with which the port sho… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.20 |
esmPortOperationalHybridType | 0 | 0 |
This object is only applicable to hybrid ports . It indicates the actual media type that has link up and is or will be passing t… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.21 |
esmPortCfgMMULowWaterMarkCellSetLimit | 0 | 0 |
Per-port-per-CoS Head of Line blocking cell limits. Range is 0 - 16383 Firebolt register Offset: 0x006pp30 - 0x37 Bits: 13:0 Cell… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.22 |
esmPortCfgMMUDynamicCellSetLimit | 0 | 0 |
Per-egress port cell-based dynamic (shared buffer pool) memory usage drop and resume thresholds. This sets the limit for which th… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.23 |
esmPortViolationBitMap | 0 | 0 |
A bit map that identifies the set of Application that have blocked a port as a result of a particular violation |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.24 |
esmPortViolationClearAll | 0 | 0 |
Clear all port vioaltion |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.25 |
esmPortFloodBcastEnable | 0 | 0 |
Enable/disable the maximum flood rate for Broadcast. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.26 |
esmPortFloodUnknownUcastEnable | 0 | 0 |
Enable/disable the maximum flood rate for unknown unicast. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.27 |
esmPortMaxUnknownUcastFloodRate | 0 | 0 |
Unknown-Unicast flood threshold type. To set the type, set esmPortMaxUnknownUcastFloodRateLimit also |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.28 |
esmPortMaxMcastFloodRate | 0 | 0 |
Multicast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.29 |
esmPortMaxFloodRateLimit | 0 | 0 |
The value of the maximum broadcast flood limit. The actual range of the flood limit depends on the port speed. example: Percentage… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.30 |
esmPortMaxUnknownUcastFloodRateLimit | 0 | 0 |
The value of the maximum unknown-unicast flood limit The actual range of the flood limit depends on the port speed. example: Perce… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.31 |
esmPortMaxMcastFloodRateLimit | 0 | 0 |
The value of the maximum multicast flood limit The actual range of the flood limit depends on the port speed. example: Percentage:… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.32 |
esmPortCfgSFPType | 0 | 0 |
This object is only applicable to fiber ports. The string indicates the type of SFP/GBIC of active media. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.33 |
esmPortWaitToRestoreTimer | 0 | 0 |
|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.34 |
esmPortMinFloodRateLimit | 0 | 0 |
|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.35 |
esmPortMinMcastFloodRateLimit | 0 | 0 |
|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.36 |
esmPortFloodThresholdAction | 0 | 0 |
|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.37 |
esmPortMcastThresholdAction | 0 | 0 |
|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.38 |
esmPortFlood | 0 | 0 |
|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.39 |
esmPortMCastStorm | 0 | 0 |
|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.40 |
esmPortCfgEeeStatus | 0 | 0 |
|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.41 |
esmPortCfgEeeAutoNegState | 0 | 0 |
|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.42 |
esmPortCfgEeeCapability | 0 | 0 |
|