The value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload
fill pattern when the CEM channel group experiences an underrun and
tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'.
The default value depends on the encap type of the channel group:
For CEM encap channel group - 255 (Valid range 0..255)
For non-CEM encap channel group - 0 (Valid range 0..0).
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxDS0ChanGroupPayloadPattern OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload fill pattern when the CEM channel group experiences an underrun and tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'. The default value depends on the encap type of the channel group: For CEM encap channel group - 255 (Valid range 0..255) For non-CEM encap channel group - 0 (Valid range 0..0)." DEFVAL { 0 } ::= { tmnxDS0ChanGroupEntry 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.1 | tmnxDS0ChanGroupRowStatus | 0 | 0 | tmnxDS0ChanGroupRowStatus controls the creation and deletion of row entries in the tmnxDS0ChanGroupTable. The tmnxPortPortID for … |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.2 | tmnxDS0ChanGroupTimeSlots | 0 | 0 | tmnxDS0ChanGroupTimeSlots is a bitmap which is used to add/remove DS0 timeslots from a channel group. The description for TmnxDs0… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.3 | tmnxDS0ChanGroupSpeed | 0 | 0 | tmnxDS0ChanGroupSpeed configures the required link speed for all the time slots included in this channel group. |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.4 | tmnxDS0ChanGroupCRC | 0 | 0 | The value of tmnxDS0ChanGroupCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bi… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.5 | tmnxDS0ChanGroupMTU | 0 | 0 | The size of the largest packet which can be sent/received on the channel group, specified in octets. For groups that are used fo… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.6 | tmnxDS0ChanGroupOperMTU | 0 | 0 | The negotiated size of the largest packet which can be sent on the channel group, specified in octets. For channel groups that a… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.7 | tmnxDS0ChanGroupLastChangeTime | 0 | 0 | The tmnxDS0ChanGroupLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the t… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.8 | tmnxDS0ChanGroupIdleCycleFlags | 0 | 0 | tmnxDS0ChanGroupIdleCycleFlags configures the value that the channel group transmits during idle cycle. The default value applie… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.9 | tmnxDS0ChanGroupScramble | 0 | 0 | tmnxDS0ChanGroupScramble indicates whether payload scrambling is enabled on this ATM channel. Both ends of the connection must u… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.10 | tmnxDS0ChanGroupAcctPolicyId | 0 | 0 | The value of tmnxDS0ChanGroupAcctPolicyId specifies an existing accounting policy to use for the ds0 channel-group. Accounting p… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.11 | tmnxDS0ChanGroupCollectStats | 0 | 0 | The value of tmnxDS0ChanGroupCollectStats specifies whether or not the collection of accounting and statistical data for the net… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.12 | tmnxDS0ChanGroupPayloadFillType | 0 | 0 | The value of tmnxDS0ChanGroupPayloadFillType specifies the type of idle payload fill to be sent when the CEM channel group exper… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.14 | tmnxDS0ChanGroupSignalFillType | 0 | 0 | The value of tmnxDS0ChanGroupSignalFillType specifies the type of idle signal fill to be sent when the CAS CEM channel group exp… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.15 | tmnxDS0ChanGroupSignalPattern | 0 | 0 | The value of tmnxDS0ChanGroupSignalPattern specifies the idle signal fill pattern when the CAS CEM channel group experiences an … |