The value of tmnxDS0ChanGroupSignalPattern specifies the idle signal
fill pattern when the CAS CEM channel group experiences an underrun
and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'.
CAS ESF DS1 and CAS E1 support 4 signalling bits per timeslot (ABCD)
CAS SF DS1 supports 2 signalling bits per timeslot (AB)
The default value depends on the type of channel group:
For CAS DS1 ESF or CAS E1 channel group - 15 (Valid range 0..15)
For CAS DS1 SF channel group - 3 (Valid range 0..3)
For non-CAS or non-CEM channel group - 0 (Valid range 0..0)
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxDS0ChanGroupSignalPattern OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxDS0ChanGroupSignalPattern specifies the idle signal fill pattern when the CAS CEM channel group experiences an underrun and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'. CAS ESF DS1 and CAS E1 support 4 signalling bits per timeslot (ABCD) CAS SF DS1 supports 2 signalling bits per timeslot (AB) The default value depends on the type of channel group: For CAS DS1 ESF or CAS E1 channel group - 15 (Valid range 0..15) For CAS DS1 SF channel group - 3 (Valid range 0..3) For non-CAS or non-CEM channel group - 0 (Valid range 0..0)" DEFVAL { 0 } ::= { tmnxDS0ChanGroupEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.1 | tmnxDS0ChanGroupRowStatus | 0 | 0 | tmnxDS0ChanGroupRowStatus controls the creation and deletion of row entries in the tmnxDS0ChanGroupTable. The tmnxPortPortID for … |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.2 | tmnxDS0ChanGroupTimeSlots | 0 | 0 | tmnxDS0ChanGroupTimeSlots is a bitmap which is used to add/remove DS0 timeslots from a channel group. The description for TmnxDs0… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.3 | tmnxDS0ChanGroupSpeed | 0 | 0 | tmnxDS0ChanGroupSpeed configures the required link speed for all the time slots included in this channel group. |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.4 | tmnxDS0ChanGroupCRC | 0 | 0 | The value of tmnxDS0ChanGroupCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bi… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.5 | tmnxDS0ChanGroupMTU | 0 | 0 | The size of the largest packet which can be sent/received on the channel group, specified in octets. For groups that are used fo… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.6 | tmnxDS0ChanGroupOperMTU | 0 | 0 | The negotiated size of the largest packet which can be sent on the channel group, specified in octets. For channel groups that a… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.7 | tmnxDS0ChanGroupLastChangeTime | 0 | 0 | The tmnxDS0ChanGroupLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the t… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.8 | tmnxDS0ChanGroupIdleCycleFlags | 0 | 0 | tmnxDS0ChanGroupIdleCycleFlags configures the value that the channel group transmits during idle cycle. The default value applie… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.9 | tmnxDS0ChanGroupScramble | 0 | 0 | tmnxDS0ChanGroupScramble indicates whether payload scrambling is enabled on this ATM channel. Both ends of the connection must u… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.10 | tmnxDS0ChanGroupAcctPolicyId | 0 | 0 | The value of tmnxDS0ChanGroupAcctPolicyId specifies an existing accounting policy to use for the ds0 channel-group. Accounting p… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.11 | tmnxDS0ChanGroupCollectStats | 0 | 0 | The value of tmnxDS0ChanGroupCollectStats specifies whether or not the collection of accounting and statistical data for the net… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.12 | tmnxDS0ChanGroupPayloadFillType | 0 | 0 | The value of tmnxDS0ChanGroupPayloadFillType specifies the type of idle payload fill to be sent when the CEM channel group exper… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.13 | tmnxDS0ChanGroupPayloadPattern | 0 | 0 | The value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload fill pattern when the CEM channel group experiences an un… |
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.14 | tmnxDS0ChanGroupSignalFillType | 0 | 0 | The value of tmnxDS0ChanGroupSignalFillType specifies the type of idle signal fill to be sent when the CAS CEM channel group exp… |