The total number of packets (including bad packets) received that were
between 1519 octets in length and the maximum frame size, usually 12287
octets inclusive (excluding framing bits but including FCS octets).
The lower 32-bits of this 64-bit counter will equal the value of
tmnxPortEtherHCPkts1519toMax. The high 32-bits of this counter will
equal the value of tmnxPortEtherHCOverPkts1519toMax.
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxPortEtherHCPkts1519toMax OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 1519 octets in length and the maximum frame size, usually 12287 octets inclusive (excluding framing bits but including FCS octets). The lower 32-bits of this 64-bit counter will equal the value of tmnxPortEtherHCPkts1519toMax. The high 32-bits of this counter will equal the value of tmnxPortEtherHCOverPkts1519toMax." ::= { tmnxPortEtherEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.1 | tmnxPortEtherMTU | 0 | 0 | The size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets. For interface… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.2 | tmnxPortEtherDuplex | 0 | 0 | The tmnxPortEtherDuplex variable specifies the duplex mode used by the Ethernet interface if tmnxPortEtherAutoNegotiate has a va… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.3 | tmnxPortEtherSpeed | 0 | 0 | The tmnxPortEtherSpeed variable specifies the link speed of the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of '… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.4 | tmnxPortEtherAutoNegotiate | 0 | 0 | When the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet interface will automatically negotiate link parameters with… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.5 | tmnxPortEtherOperDuplex | 0 | 0 | The tmnxPortEtherOperDuplex variable indicates the operational duplex mode of the Ethernet interface. A value of 'fullDuplex' in… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.6 | tmnxPortEtherOperSpeed | 0 | 0 | The tmnxPortEtherOperSpeed variable indicates the operational speed of the Ethernet interface in mega-bits per second (mbps). I… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.7 | tmnxPortEtherAcctPolicyId | 0 | 0 | The value of the accounting policy must be defined prior to associating the policy with the ethernet port. Accounting policies c… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.8 | tmnxPortEtherCollectStats | 0 | 0 | Enable/disable the collection of accounting and statistical data for the network ethernet port. When applying accounting policie… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.9 | tmnxPortEtherMDIMDIX | 0 | 0 | The tmnxPortEtherMDIMDIX variable indicates whether the Ethernet interface is of type 'mdi' (Media Dependent Interface) or 'mdix'… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.10 | tmnxPortEtherXGigMode | 0 | 0 | The tmnxPortEtherXGigMode variable specifies whether the Ethernet interface is in LAN or WAN mode. tmnxPortEtherXGigMode must be… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.11 | tmnxPortEtherEgressRate | 0 | 0 | The tmnxPortEtherEgressRate variable specifies the maximum egress bandwidth (in kilobits per second) that the Ethernet interface… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.12 | tmnxPortEtherDot1qEtype | 0 | 0 | The tmnxPortEtherDot1qEtype variable indicates the ethertype expected when the port's encapsulation type is dot1qEncap. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.13 | tmnxPortEtherQinqEtype | 0 | 0 | The tmnxPortEtherQinqEtype variable indicates the ethertype expected when the port's encapsulation type is qinqEncap. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.14 | tmnxPortEtherIngressRate | 0 | 0 | The tmnxPortEtherIngressRate variable specifies the maximum ingress bandwidth (in mega-bits per second) that the Ethernet interf… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.15 | tmnxPortEtherReportAlarm | 0 | 0 | The value of tmnxPortEtherReportAlarm determines when and if to generate tmnxEqPortEtherAlarm and tmnxEqPortEtherAlarmClear. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.16 | tmnxPortEtherReportAlarmStatus | 0 | 0 | The value of tmnxPortEtherReportAlarmStatus indicates the alarms on this port. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.17 | tmnxPortEtherPkts1519toMax | 0 | 0 | The total number of packets received that were longer than 1518 octets but less than the maximum frame size for the particular m… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.18 | tmnxPortEtherHCOverPkts1519toMax | 0 | 0 | The number of times the associated tmnxPortEtherPkts1519toMax counter has overflowed. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.20 | tmnxPortEtherLacpTunnel | 0 | 0 | The value of tmnxPortEtherLacpTunnel specifies whether the LACP packet tunneling for the ethernet port is enabled or disabled. Wh… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.21 | tmnxPortEtherDownWhenLoopedEnabled | 0 | 0 | The value of tmnxPortEtherDownWhenLoopedEnabled specifies whether physical loop detection for the Ethernet port is enabled or dis… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.22 | tmnxPortEtherDownWhenLoopedKeepAlive | 0 | 0 | The tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the number of seconds between each keep alive PDU transmission. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.23 | tmnxPortEtherDownWhenLoopedRetry | 0 | 0 | The tmnxPortEtherDownWhenLoopedRetry variable specifies the minimum number of seconds the port should wait after detecting a loo… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.24 | tmnxPortEtherDownWhenLoopedState | 0 | 0 | The value of tmnxPortEtherDownWhenLoopedState indicates whether a physical loop has been detected on the port or not. If tmnxPor… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.25 | tmnxPortEtherPBBEtype | 0 | 0 | The tmnxPortEtherPBBEtype variable indicates the Ethertype expected for Provider Backbone Bridging Frames. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.26 | tmnxPortEtherReasonDownFlags | 0 | 0 | The tmnxPortEtherReasonDownFlags indicates why an ethernet port may be in the operationally 'down' state. The following reasons … |