The tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the
number of seconds between each keep alive PDU transmission.
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxPortEtherDownWhenLoopedKeepAlive OBJECT-TYPE SYNTAX Unsigned32 (1..120) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The tmnxPortEtherDownWhenLoopedKeepAlive variable specifies the number of seconds between each keep alive PDU transmission." DEFVAL { 10 } ::= { tmnxPortEtherEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.1 | tmnxPortEtherMTU | 0 | 0 | The size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets. For interface… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.2 | tmnxPortEtherDuplex | 0 | 0 | The tmnxPortEtherDuplex variable specifies the duplex mode used by the Ethernet interface if tmnxPortEtherAutoNegotiate has a va… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.3 | tmnxPortEtherSpeed | 0 | 0 | The tmnxPortEtherSpeed variable specifies the link speed of the Ethernet interface if tmnxPortEtherAutoNegotiate has a value of '… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.4 | tmnxPortEtherAutoNegotiate | 0 | 0 | When the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet interface will automatically negotiate link parameters with… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.5 | tmnxPortEtherOperDuplex | 0 | 0 | The tmnxPortEtherOperDuplex variable indicates the operational duplex mode of the Ethernet interface. A value of 'fullDuplex' in… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.6 | tmnxPortEtherOperSpeed | 0 | 0 | The tmnxPortEtherOperSpeed variable indicates the operational speed of the Ethernet interface in mega-bits per second (mbps). I… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.7 | tmnxPortEtherAcctPolicyId | 0 | 0 | The value of the accounting policy must be defined prior to associating the policy with the ethernet port. Accounting policies c… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.8 | tmnxPortEtherCollectStats | 0 | 0 | Enable/disable the collection of accounting and statistical data for the network ethernet port. When applying accounting policie… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.9 | tmnxPortEtherMDIMDIX | 0 | 0 | The tmnxPortEtherMDIMDIX variable indicates whether the Ethernet interface is of type 'mdi' (Media Dependent Interface) or 'mdix'… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.10 | tmnxPortEtherXGigMode | 0 | 0 | The tmnxPortEtherXGigMode variable specifies whether the Ethernet interface is in LAN or WAN mode. tmnxPortEtherXGigMode must be… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.11 | tmnxPortEtherEgressRate | 0 | 0 | The tmnxPortEtherEgressRate variable specifies the maximum egress bandwidth (in kilobits per second) that the Ethernet interface… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.12 | tmnxPortEtherDot1qEtype | 0 | 0 | The tmnxPortEtherDot1qEtype variable indicates the ethertype expected when the port's encapsulation type is dot1qEncap. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.13 | tmnxPortEtherQinqEtype | 0 | 0 | The tmnxPortEtherQinqEtype variable indicates the ethertype expected when the port's encapsulation type is qinqEncap. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.14 | tmnxPortEtherIngressRate | 0 | 0 | The tmnxPortEtherIngressRate variable specifies the maximum ingress bandwidth (in mega-bits per second) that the Ethernet interf… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.15 | tmnxPortEtherReportAlarm | 0 | 0 | The value of tmnxPortEtherReportAlarm determines when and if to generate tmnxEqPortEtherAlarm and tmnxEqPortEtherAlarmClear. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.16 | tmnxPortEtherReportAlarmStatus | 0 | 0 | The value of tmnxPortEtherReportAlarmStatus indicates the alarms on this port. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.17 | tmnxPortEtherPkts1519toMax | 0 | 0 | The total number of packets received that were longer than 1518 octets but less than the maximum frame size for the particular m… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.18 | tmnxPortEtherHCOverPkts1519toMax | 0 | 0 | The number of times the associated tmnxPortEtherPkts1519toMax counter has overflowed. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.19 | tmnxPortEtherHCPkts1519toMax | 0 | 0 | The total number of packets (including bad packets) received that were between 1519 octets in length and the maximum frame size,… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.20 | tmnxPortEtherLacpTunnel | 0 | 0 | The value of tmnxPortEtherLacpTunnel specifies whether the LACP packet tunneling for the ethernet port is enabled or disabled. Wh… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.21 | tmnxPortEtherDownWhenLoopedEnabled | 0 | 0 | The value of tmnxPortEtherDownWhenLoopedEnabled specifies whether physical loop detection for the Ethernet port is enabled or dis… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.23 | tmnxPortEtherDownWhenLoopedRetry | 0 | 0 | The tmnxPortEtherDownWhenLoopedRetry variable specifies the minimum number of seconds the port should wait after detecting a loo… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.24 | tmnxPortEtherDownWhenLoopedState | 0 | 0 | The value of tmnxPortEtherDownWhenLoopedState indicates whether a physical loop has been detected on the port or not. If tmnxPor… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.25 | tmnxPortEtherPBBEtype | 0 | 0 | The tmnxPortEtherPBBEtype variable indicates the Ethertype expected for Provider Backbone Bridging Frames. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.4.1.26 | tmnxPortEtherReasonDownFlags | 0 | 0 | The tmnxPortEtherReasonDownFlags indicates why an ethernet port may be in the operationally 'down' state. The following reasons … |