The value of vRtrMplsLspFRMethod specifies the fast reroute
method used.
In the 'One-to-one Backup' method, a backup LSP is established
which will intersect the original LSP somewhere downstream
of the point of link or node failure. For each LSP that is
backed up, a separate backup LSP is established.
In the 'Facility Backup' method, instead of creating a separate
LSP for every LSP that is to be backed up, a single LSP is
created which serves as a backup for a set of LSPs. Such an LSP
tunnel is called a 'bypass tunnel'.
Parsed from file TIMETRA-MPLS-MIB.mib
Module: TIMETRA-MPLS-MIB
vRtrMplsLspFRMethod OBJECT-TYPE SYNTAX INTEGER { oneToOneBackup(1), facilityBackup(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspFRMethod specifies the fast reroute method used. In the 'One-to-one Backup' method, a backup LSP is established which will intersect the original LSP somewhere downstream of the point of link or node failure. For each LSP that is backed up, a separate backup LSP is established. In the 'Facility Backup' method, instead of creating a separate LSP for every LSP that is to be backed up, a single LSP is created which serves as a backup for a set of LSPs. Such an LSP tunnel is called a 'bypass tunnel'." DEFVAL { oneToOneBackup } ::= { vRtrMplsLspEntry 30 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.1 | vRtrMplsLspIndex | 0 | 0 | The unique value which identifies this Labeled Switch Path (LSP) for this virtual router in the Alcatel 7x50 SR system. It is a … |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.2 | vRtrMplsLspRowStatus | 0 | 0 | The row status used for creation, deletion, or control of vRtrMplsLspTable entries. Before the row can be placed into the 'activ… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.3 | vRtrMplsLspLastChange | 0 | 0 | The sysUpTime when this row was last modified. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.4 | vRtrMplsLspName | 0 | 0 | Administrative name for this Labeled Switch Path. The vRtrMplsLspName must be unique within a virtual router instance. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.5 | vRtrMplsLspAdminState | 0 | 0 | The desired administrative state for this LSP. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.6 | vRtrMplsLspOperState | 0 | 0 | The current operational state of this LSP. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.7 | vRtrMplsLspFromAddr | 0 | 0 | Source IP address of this LSP. If vRtrMplsLspFromAddr has not been explicitly set, the system IP address will be used. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.8 | vRtrMplsLspToAddr | 0 | 0 | Destination IP address of this LSP. This LSP will not be signaled until vRtrMplsLspToAddr is explicitly set. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.9 | vRtrMplsLspType | 0 | 0 | The vRtrMplsLspType object is an enumerated value that indicates whether the label value is statically or dynamically assigned o… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.10 | vRtrMplsLspOutSegIndx | 0 | 0 | The vRtrMplsLspOutSegIndx is the index value of the entry in the mplsOutSegmentTable associated with this vRtrMplsLspEntry when v… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.11 | vRtrMplsLspRetryTimer | 0 | 0 | The value of vRtrMplsLspRetryTimer specifies the time in seconds the software will wait before attempting the establish the faile… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.12 | vRtrMplsLspRetryLimit | 0 | 0 | The value of vRtrMplsLspRetryLimit specifies the number of attempts the software should make to reestablish a failed LSP before t… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.13 | vRtrMplsLspMetric | 0 | 0 | The value of vRtrMplsLspMetric specifies the metric for this LSP which is used to select an LSP among a set of LSPs which are des… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.14 | vRtrMplsLspDecrementTtl | 0 | 0 | When the value of vRtrMplsLspDecrementTtl is 'true', the ingress ESR writes the TTL of the IP packet into the label and each tran… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.15 | vRtrMplsLspCspf | 0 | 0 | When the value of vRtrMplsLspCspf is 'true', CSPF computation for constrained-path LSP is enabled. When the value of vRtrMplsLsp… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.16 | vRtrMplsLspFastReroute | 0 | 0 | When the value of vRtrMplsLspFastReroute is 'true', fast reroute is enabled. A pre-computed detour LSP is created from each nod… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.17 | vRtrMplsLspFRHopLimit | 0 | 0 | The value of vRtrMplsLspFRHopLimit specifies the total number of hops a detour LSP can take before merging back onto the main LSP… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.18 | vRtrMplsLspFRBandwidth | 0 | 0 | The value of vRtrMplsLspFRBandwidth specified the amount of bandwidth in mega-bits per second (Mbps) to be reserved for the detou… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.19 | vRtrMplsLspClassOfService | 0 | 0 | The name of the class of service value to be assigned to all packets on the LSP is specified with vRtrMplsLspClassOfService. The … |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.20 | vRtrMplsLspSetupPriority | 0 | 0 | The value of vRtrMplsLspSetupPriority specifies the setup priority to use when insufficient bandwidth is available to setup a LS… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.21 | vRtrMplsLspHoldPriority | 0 | 0 | The value of vRtrMplsLspHoldPriority specifies the hold priority to use when insufficient bandwidth is available to setup a LSP.… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.22 | vRtrMplsLspRecord | 0 | 0 | When the value of vRtrMplsLspRecord is 'true', recording of all the hops that a LSP traverses is enabled. When the value of vRtr… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.23 | vRtrMplsLspPreference | 0 | 0 | The value of vRtrMplsLspPreference specifies the preference for the LSP. This value is used for load balancing between multiple… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.24 | vRtrMplsLspBandwidth | 0 | 0 | The value of vRtrMplsLspBandwidth specifies the amount of bandwidth in mega-bits per second (Mbps) to be reserved for the LSP. A … |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.25 | vRtrMplsLspBwProtect | 0 | 0 | When vRtrMplsLspBwProtect has a value of 'true', bandwidth protection is enabled on a LSP. LSPs that reserve bandwidth will be u… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.26 | vRtrMplsLspHopLimit | 0 | 0 | The value of vRtrMplsLspHopLimit specifies the maximum number of hops that a LSP will traverse including the ingress and egress E… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.27 | vRtrMplsLspNegotiatedMTU | 0 | 0 | The value of vRtrMplsLspNegotiatedMTU specifies the size for the Maximum transmission unit (MTU) that is negotiated during LSP es… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.28 | vRtrMplsLspRsvpResvStyle | 0 | 0 | The value of vRtrMplsLspRsvpResvStyle specifies the reservation style for RSVP. The reservation style can be set to 'Shared- Expl… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.29 | vRtrMplsLspRsvpAdspec | 0 | 0 | When the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC object will be included in RSVP messages. When the value of vRtrMpl… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.31 | vRtrMplsLspFRNodeProtect | 0 | 0 | Setting the value of vRtrMplsLspFRNodeProtect to 'true' enables node protection i.e. protection against the failure of a node on… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.32 | vRtrMplsLspAdminGroupInclude | 0 | 0 | The value of vRtrMplsLspAdminGroupInclude is a bit-map that specifies a list of admin groups that should be included when this LS… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.33 | vRtrMplsLspAdminGroupExclude | 0 | 0 | The value of vRtrMplsLspAdminGroupExclude is a bit-map that specifies a list of admin groups that should be excluded when this LS… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.34 | vRtrMplsLspAdaptive | 0 | 0 | Setting the value of vRtrMplsLspAdaptive to 'true' enables make-before-break functionality for the LSP. When the attributes of an… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.35 | vRtrMplsLspInheritance | 0 | 0 | For each writable object in this row that can be configured to inherit its value from the corresponding object in the vRtrMplsGen… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.36 | vRtrMplsLspOptimizeTimer | 0 | 0 | The value of vRtrMplsLspOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimize the… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.37 | vRtrMplsLspOperFastReroute | 0 | 0 | The value of vRtrMplsLspOperFastReroute specifies whether the operational LSP has fast reroute enabled or disabled. When make-bef… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.38 | vRtrMplsLspFRObject | 0 | 0 | The value of vRtrMplsLspFRObject specifies whether fast reroute, for LSPs using 'Facility Backup', is signalled with or without t… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.39 | vRtrMplsLspHoldTimer | 0 | 0 | The value of vRtrMplsLspHoldTimer specifies the time, in seconds, for which the ingress node holds a bit before programming its d… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.40 | vRtrMplsLspCspfTeMetricEnabled | 0 | 0 | The value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE metric would be used for the purpose of the LSP path comput… |