| 1.3.6.1.4.1.6527.3.1.2.6.1.1.1 |
vRtrMplsLspIndex | 0 | 0 |
The unique value which identifies this Labeled Switch Path (LSP) for this virtual router in the Alcatel 7x50 SR system. It is a … |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.2 |
vRtrMplsLspRowStatus | 0 | 0 |
The row status used for creation, deletion, or control of vRtrMplsLspTable entries. Before the row can be placed into the 'activ… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.3 |
vRtrMplsLspLastChange | 0 | 0 |
The sysUpTime when this row was last modified. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.4 |
vRtrMplsLspName | 0 | 0 |
Administrative name for this Labeled Switch Path. The vRtrMplsLspName must be unique within a virtual router instance. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.5 |
vRtrMplsLspAdminState | 0 | 0 |
The desired administrative state for this LSP. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.6 |
vRtrMplsLspOperState | 0 | 0 |
The current operational state of this LSP. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.7 |
vRtrMplsLspFromAddr | 0 | 0 |
Source IP address of this LSP. If vRtrMplsLspFromAddr has not been explicitly set, the system IP address will be used. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.8 |
vRtrMplsLspToAddr | 0 | 0 |
Destination IP address of this LSP. This LSP will not be signaled until vRtrMplsLspToAddr is explicitly set. |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.9 |
vRtrMplsLspType | 0 | 0 |
The vRtrMplsLspType object is an enumerated value that indicates whether the label value is statically or dynamically assigned o… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.10 |
vRtrMplsLspOutSegIndx | 0 | 0 |
The vRtrMplsLspOutSegIndx is the index value of the entry in the mplsOutSegmentTable associated with this vRtrMplsLspEntry when v… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.11 |
vRtrMplsLspRetryTimer | 0 | 0 |
The value of vRtrMplsLspRetryTimer specifies the time in seconds the software will wait before attempting the establish the faile… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.12 |
vRtrMplsLspRetryLimit | 0 | 0 |
The value of vRtrMplsLspRetryLimit specifies the number of attempts the software should make to reestablish a failed LSP before t… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.13 |
vRtrMplsLspMetric | 0 | 0 |
The value of vRtrMplsLspMetric specifies the metric for this LSP which is used to select an LSP among a set of LSPs which are des… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.14 |
vRtrMplsLspDecrementTtl | 0 | 0 |
When the value of vRtrMplsLspDecrementTtl is 'true', the ingress ESR writes the TTL of the IP packet into the label and each tran… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.15 |
vRtrMplsLspCspf | 0 | 0 |
When the value of vRtrMplsLspCspf is 'true', CSPF computation for constrained-path LSP is enabled. When the value of vRtrMplsLsp… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.16 |
vRtrMplsLspFastReroute | 0 | 0 |
When the value of vRtrMplsLspFastReroute is 'true', fast reroute is enabled. A pre-computed detour LSP is created from each nod… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.17 |
vRtrMplsLspFRHopLimit | 0 | 0 |
The value of vRtrMplsLspFRHopLimit specifies the total number of hops a detour LSP can take before merging back onto the main LSP… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.18 |
vRtrMplsLspFRBandwidth | 0 | 0 |
The value of vRtrMplsLspFRBandwidth specified the amount of bandwidth in mega-bits per second (Mbps) to be reserved for the detou… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.19 |
vRtrMplsLspClassOfService | 0 | 0 |
The name of the class of service value to be assigned to all packets on the LSP is specified with vRtrMplsLspClassOfService. The … |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.20 |
vRtrMplsLspSetupPriority | 0 | 0 |
The value of vRtrMplsLspSetupPriority specifies the setup priority to use when insufficient bandwidth is available to setup a LS… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.21 |
vRtrMplsLspHoldPriority | 0 | 0 |
The value of vRtrMplsLspHoldPriority specifies the hold priority to use when insufficient bandwidth is available to setup a LSP. … |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.22 |
vRtrMplsLspRecord | 0 | 0 |
When the value of vRtrMplsLspRecord is 'true', recording of all the hops that a LSP traverses is enabled. When the value of vRtr… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.23 |
vRtrMplsLspPreference | 0 | 0 |
The value of vRtrMplsLspPreference specifies the preference for the LSP. This value is used for load balancing between multiple … |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.24 |
vRtrMplsLspBandwidth | 0 | 0 |
The value of vRtrMplsLspBandwidth specifies the amount of bandwidth in mega-bits per second (Mbps) to be reserved for the LSP. A … |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.25 |
vRtrMplsLspBwProtect | 0 | 0 |
When vRtrMplsLspBwProtect has a value of 'true', bandwidth protection is enabled on a LSP. LSPs that reserve bandwidth will be u… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.26 |
vRtrMplsLspHopLimit | 0 | 0 |
The value of vRtrMplsLspHopLimit specifies the maximum number of hops that a LSP will traverse including the ingress and egress E… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.27 |
vRtrMplsLspNegotiatedMTU | 0 | 0 |
The value of vRtrMplsLspNegotiatedMTU specifies the size for the Maximum transmission unit (MTU) that is negotiated during LSP es… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.28 |
vRtrMplsLspRsvpResvStyle | 0 | 0 |
The value of vRtrMplsLspRsvpResvStyle specifies the reservation style for RSVP. The reservation style can be set to 'Shared- Expl… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.29 |
vRtrMplsLspRsvpAdspec | 0 | 0 |
When the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC object will be included in RSVP messages. When the value of vRtrMpl… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.30 |
vRtrMplsLspFRMethod | 0 | 0 |
The value of vRtrMplsLspFRMethod specifies the fast reroute method used. In the 'One-to-one Backup' method, a backup LSP is esta… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.31 |
vRtrMplsLspFRNodeProtect | 0 | 0 |
Setting the value of vRtrMplsLspFRNodeProtect to 'true' enables node protection i.e. protection against the failure of a node on … |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.32 |
vRtrMplsLspAdminGroupInclude | 0 | 0 |
The value of vRtrMplsLspAdminGroupInclude is a bit-map that specifies a list of admin groups that should be included when this LS… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.33 |
vRtrMplsLspAdminGroupExclude | 0 | 0 |
The value of vRtrMplsLspAdminGroupExclude is a bit-map that specifies a list of admin groups that should be excluded when this LS… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.34 |
vRtrMplsLspAdaptive | 0 | 0 |
Setting the value of vRtrMplsLspAdaptive to 'true' enables make-before-break functionality for the LSP. When the attributes of an… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.35 |
vRtrMplsLspInheritance | 0 | 0 |
For each writable object in this row that can be configured to inherit its value from the corresponding object in the vRtrMplsGen… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.36 |
vRtrMplsLspOptimizeTimer | 0 | 0 |
The value of vRtrMplsLspOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimize the… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.37 |
vRtrMplsLspOperFastReroute | 0 | 0 |
The value of vRtrMplsLspOperFastReroute specifies whether the operational LSP has fast reroute enabled or disabled.
When make-bef… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.38 |
vRtrMplsLspFRObject | 0 | 0 |
The value of vRtrMplsLspFRObject specifies whether fast reroute, for LSPs using 'Facility Backup', is signalled with or without t… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.39 |
vRtrMplsLspHoldTimer | 0 | 0 |
The value of vRtrMplsLspHoldTimer specifies the time, in seconds, for which the ingress node holds a bit before programming its d… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.40 |
vRtrMplsLspCspfTeMetricEnabled | 0 | 0 |
The value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE metric would be used for the purpose of the LSP path comput… |
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.41 |
vRtrMplsLspP2mpId | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.42 |
vRtrMplsLspClassType | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.43 |
vRtrMplsLspOperMetric | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.44 |
vRtrMplsLspLdpOverRsvpInclude | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.45 |
vRtrMplsLspLeastFill | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.46 |
vRtrMplsLspVprnAutoBindInclude | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.47 |
vRtrMplsLspMainCTRetryLimit | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.48 |
vRtrMplsLspIgpShortcut | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.50 |
vRtrMplsLspAutoBandwidth | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.1.1.51 |
vRtrMplsLspCspfToFirstLoose | 0 | 0 |
|