The value of vRtrMplsLspPathOperBandwidth specifies the amount of
bandwidth in mega-bits per seconds (Mbps) that has been reserved
for the operational LSP path.
When make-before-break functionality for the LSP is enabled and
if the path bandwidth is changed, the resources allocated to the
existing LSP paths will not be released until a new path with
the new bandwidth settings has been established. While a new path
is being signaled, the administrative value and the operational
values of the path bandwidth may differ. The value of
vRtrMplsLspPathBandwidth specifies the bandwidth requirements for
the new LSP path trying to be established whereas the value of
vRtrMplsLspPathOperBandwidth specifies the bandwidth reserved
for the existing LSP path.
Parsed from file TIMETRA-MPLS-MIB.mib
Module: TIMETRA-MPLS-MIB
vRtrMplsLspPathOperBandwidth OBJECT-TYPE SYNTAX Integer32 UNITS "mega-bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) that has been reserved for the operational LSP path. When make-before-break functionality for the LSP is enabled and if the path bandwidth is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new bandwidth settings has been established. While a new path is being signaled, the administrative value and the operational values of the path bandwidth may differ. The value of vRtrMplsLspPathBandwidth specifies the bandwidth requirements for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperBandwidth specifies the bandwidth reserved for the existing LSP path." ::= { vRtrMplsLspPathEntry 31 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.6.4.1.1 | vRtrMplsLspPathRowStatus | 0 | 0 | The row status used for creation, deletion, or control of vRtrMplsLspPathTable entries. Before the row can be placed into the 'a… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.2 | vRtrMplsLspPathLastChange | 0 | 0 | The sysUpTime when this row was last modified. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.3 | vRtrMplsLspPathType | 0 | 0 | This variable is an enum that represents the role this path is taking within this LSP. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.4 | vRtrMplsLspPathCos | 0 | 0 | The configured Class Of Service (COS) for this path. If the value is between 0 and 7 inclusive, this value will be inserted in t… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.5 | vRtrMplsLspPathProperties | 0 | 0 | The set of configured properties for this path expressed as a bit map. For example, if the path is an adaptive path, the bit cor… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.6 | vRtrMplsLspPathBandwidth | 0 | 0 | The value of vRtrMplsLspPathBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) to be reserved for this L… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.7 | vRtrMplsLspPathBwProtect | 0 | 0 | When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth protection is enabled on a LSP. LSPs that reserve bandwidth will … |
1.3.6.1.4.1.6527.3.1.2.6.4.1.8 | vRtrMplsLspPathState | 0 | 0 | The current working state of this path within this LSP. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.9 | vRtrMplsLspPathPreference | 0 | 0 | When there is no path in the LSP with vRtrMplsLspPathType value of 'primary', 'secondary' type paths of this LSP with the same va… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.10 | vRtrMplsLspPathCosSource | 0 | 0 | When vRtrMplsLspPathCosSource is set to 'true', the value of vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService. W… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.11 | vRtrMplsLspPathClassOfService | 0 | 0 | The name of the class of service value to be assigned to all packets on the LSP is specified with vRtrMplsLspPathClassOfService.… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.12 | vRtrMplsLspPathSetupPriority | 0 | 0 | The value of vRtrMplsLspPathSetupPriority specifies the setup priority to use when insufficient bandwidth is available to setup a… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.13 | vRtrMplsLspPathHoldPriority | 0 | 0 | The value of vRtrMplsLspPathHoldPriority specifies the hold priority to use when insufficient bandwidth is available to setup a L… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.14 | vRtrMplsLspPathRecord | 0 | 0 | When the value of vRtrMplsLspPathRecord is 'record', recording of all the hops that a LSP traverses is enabled. When the value o… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.15 | vRtrMplsLspPathHopLimit | 0 | 0 | The value of vRtrMplsLspPathHopLimit specifies the maximum number of hops that a LSP will traverse including the ingress and egre… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.16 | vRtrMplsLspPathSharing | 0 | 0 | When vRtrMplsLspPathSharing has a value of 'true', path-sharing is enabled for the secondary path. Path-sharing is used to contr… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.17 | vRtrMplsLspPathAdminState | 0 | 0 | The desired administrative state for this LSP path. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.18 | vRtrMplsLspPathOperState | 0 | 0 | The current operational state of this LSP path. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.19 | vRtrMplsLspPathInheritance | 0 | 0 | For each writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrMplsLsp… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.20 | vRtrMplsLspPathLspId | 0 | 0 | This value identifies the label switched path that is signaled for this entry. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.21 | vRtrMplsLspPathRetryTimeRemaining | 0 | 0 | The time in 10-millisecond units to signal this path. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.22 | vRtrMplsLspPathTunnelARHopListIndex | 0 | 0 | Primary index into the mplsTunnelARHopTable identifying a particular recorded hop list. A value of 0 implies that there is no rec… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.23 | vRtrMplsLspPathNegotiatedMTU | 0 | 0 | The value of vRtrMplsLspPathNegotiatedMTU specifies the size for the Maximum transmission unit (MTU) that is negotiated during es… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.24 | vRtrMplsLspPathFailCode | 0 | 0 | The value of vRtrMplsLspPathFailCode specifies the reason code for LSP Path failure. A value of 0 indicates that no failure has o… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.25 | vRtrMplsLspPathFailNodeAddr | 0 | 0 | The value of vRtrMplsLspPathFailNodeAddr specifies the IP address of the node in the LSP path at which the LSP path failed. When… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.26 | vRtrMplsLspPathAdminGroupInclude | 0 | 0 | The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that specifies a list of admin groups that should be included when thi… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.27 | vRtrMplsLspPathAdminGroupExclude | 0 | 0 | The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that specifies a list of admin groups that should be excluded when thi… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.28 | vRtrMplsLspPathAdaptive | 0 | 0 | Setting the value of vRtrMplsLspPathAdaptive to 'true', enables make-before-break functionality for the LSP path. Setting the va… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.29 | vRtrMplsLspPathOptimizeTimer | 0 | 0 | The value of vRtrMplsLspPathOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimiz… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.30 | vRtrMplsLspPathNextOptimize | 0 | 0 | The value of vRtrMplsLspPathNextOptimize specifies the current value of the optimize timer. This is the time, in seconds, remain… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.32 | vRtrMplsLspPathMBBState | 0 | 0 | The value of vRtrMplsLspPathMBBState specifies the state of the most recent invocation of the make-before-break functionality. Po… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.33 | vRtrMplsLspPathResignal | 0 | 0 | Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers the re-signaling of the LSP path. If the LSP path is operatio… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.34 | vRtrMplsLspPathTunnelCRHopListIndex | 0 | 0 | Primary index into the vRtrMplsTunnelCHopTable identifying a particular computed hop list. A value of 0 implies that there is no … |
1.3.6.1.4.1.6527.3.1.2.6.4.1.35 | vRtrMplsLspPathOperMTU | 0 | 0 | The value of vRtrMplsLspPathOperMTU specifies the size for the Maximum transmission unit (MTU) that is currently operation for th… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.36 | vRtrMplsLspPathRecordLabel | 0 | 0 | When the value of vRtrMplsLspPathRecordLabel is 'record', recording of labels at each node that a LSP traverses is enabled. When … |