The value of vRtrMplsLspPathMBBState specifies the state of the
most recent invocation of the make-before-break functionality.
Possible states are:
none (1) - no make-before-break invoked
success (2) - make-before-break successful
inProgress (3) - make-before-break in progress
fail (4) - make-before-break failed.
Parsed from file TIMETRA-MPLS-MIB.mib
Module: TIMETRA-MPLS-MIB
vRtrMplsLspPathMBBState OBJECT-TYPE SYNTAX INTEGER { none (1), success (2), inProgress (3), fail (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMBBState specifies the state of the most recent invocation of the make-before-break functionality. Possible states are: none (1) - no make-before-break invoked success (2) - make-before-break successful inProgress (3) - make-before-break in progress fail (4) - make-before-break failed." ::= { vRtrMplsLspPathEntry 32 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.6.4.1.1 | vRtrMplsLspPathRowStatus | 0 | 0 | The row status used for creation, deletion, or control of vRtrMplsLspPathTable entries. Before the row can be placed into the 'a… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.2 | vRtrMplsLspPathLastChange | 0 | 0 | The sysUpTime when this row was last modified. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.3 | vRtrMplsLspPathType | 0 | 0 | This variable is an enum that represents the role this path is taking within this LSP. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.4 | vRtrMplsLspPathCos | 0 | 0 | The configured Class Of Service (COS) for this path. If the value is between 0 and 7 inclusive, this value will be inserted in t… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.5 | vRtrMplsLspPathProperties | 0 | 0 | The set of configured properties for this path expressed as a bit map. For example, if the path is an adaptive path, the bit cor… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.6 | vRtrMplsLspPathBandwidth | 0 | 0 | The value of vRtrMplsLspPathBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) to be reserved for this L… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.7 | vRtrMplsLspPathBwProtect | 0 | 0 | When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth protection is enabled on a LSP. LSPs that reserve bandwidth will … |
1.3.6.1.4.1.6527.3.1.2.6.4.1.8 | vRtrMplsLspPathState | 0 | 0 | The current working state of this path within this LSP. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.9 | vRtrMplsLspPathPreference | 0 | 0 | When there is no path in the LSP with vRtrMplsLspPathType value of 'primary', 'secondary' type paths of this LSP with the same va… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.10 | vRtrMplsLspPathCosSource | 0 | 0 | When vRtrMplsLspPathCosSource is set to 'true', the value of vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService. W… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.11 | vRtrMplsLspPathClassOfService | 0 | 0 | The name of the class of service value to be assigned to all packets on the LSP is specified with vRtrMplsLspPathClassOfService.… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.12 | vRtrMplsLspPathSetupPriority | 0 | 0 | The value of vRtrMplsLspPathSetupPriority specifies the setup priority to use when insufficient bandwidth is available to setup a… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.13 | vRtrMplsLspPathHoldPriority | 0 | 0 | The value of vRtrMplsLspPathHoldPriority specifies the hold priority to use when insufficient bandwidth is available to setup a L… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.14 | vRtrMplsLspPathRecord | 0 | 0 | When the value of vRtrMplsLspPathRecord is 'record', recording of all the hops that a LSP traverses is enabled. When the value o… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.15 | vRtrMplsLspPathHopLimit | 0 | 0 | The value of vRtrMplsLspPathHopLimit specifies the maximum number of hops that a LSP will traverse including the ingress and egre… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.16 | vRtrMplsLspPathSharing | 0 | 0 | When vRtrMplsLspPathSharing has a value of 'true', path-sharing is enabled for the secondary path. Path-sharing is used to contr… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.17 | vRtrMplsLspPathAdminState | 0 | 0 | The desired administrative state for this LSP path. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.18 | vRtrMplsLspPathOperState | 0 | 0 | The current operational state of this LSP path. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.19 | vRtrMplsLspPathInheritance | 0 | 0 | For each writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrMplsLsp… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.20 | vRtrMplsLspPathLspId | 0 | 0 | This value identifies the label switched path that is signaled for this entry. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.21 | vRtrMplsLspPathRetryTimeRemaining | 0 | 0 | The time in 10-millisecond units to signal this path. |
1.3.6.1.4.1.6527.3.1.2.6.4.1.22 | vRtrMplsLspPathTunnelARHopListIndex | 0 | 0 | Primary index into the mplsTunnelARHopTable identifying a particular recorded hop list. A value of 0 implies that there is no rec… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.23 | vRtrMplsLspPathNegotiatedMTU | 0 | 0 | The value of vRtrMplsLspPathNegotiatedMTU specifies the size for the Maximum transmission unit (MTU) that is negotiated during es… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.24 | vRtrMplsLspPathFailCode | 0 | 0 | The value of vRtrMplsLspPathFailCode specifies the reason code for LSP Path failure. A value of 0 indicates that no failure has o… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.25 | vRtrMplsLspPathFailNodeAddr | 0 | 0 | The value of vRtrMplsLspPathFailNodeAddr specifies the IP address of the node in the LSP path at which the LSP path failed. When… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.26 | vRtrMplsLspPathAdminGroupInclude | 0 | 0 | The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that specifies a list of admin groups that should be included when thi… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.27 | vRtrMplsLspPathAdminGroupExclude | 0 | 0 | The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that specifies a list of admin groups that should be excluded when thi… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.28 | vRtrMplsLspPathAdaptive | 0 | 0 | Setting the value of vRtrMplsLspPathAdaptive to 'true', enables make-before-break functionality for the LSP path. Setting the va… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.29 | vRtrMplsLspPathOptimizeTimer | 0 | 0 | The value of vRtrMplsLspPathOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimiz… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.30 | vRtrMplsLspPathNextOptimize | 0 | 0 | The value of vRtrMplsLspPathNextOptimize specifies the current value of the optimize timer. This is the time, in seconds, remain… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.31 | vRtrMplsLspPathOperBandwidth | 0 | 0 | The value of vRtrMplsLspPathOperBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) that has been reserv… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.33 | vRtrMplsLspPathResignal | 0 | 0 | Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers the re-signaling of the LSP path. If the LSP path is operatio… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.34 | vRtrMplsLspPathTunnelCRHopListIndex | 0 | 0 | Primary index into the vRtrMplsTunnelCHopTable identifying a particular computed hop list. A value of 0 implies that there is no … |
1.3.6.1.4.1.6527.3.1.2.6.4.1.35 | vRtrMplsLspPathOperMTU | 0 | 0 | The value of vRtrMplsLspPathOperMTU specifies the size for the Maximum transmission unit (MTU) that is currently operation for th… |
1.3.6.1.4.1.6527.3.1.2.6.4.1.36 | vRtrMplsLspPathRecordLabel | 0 | 0 | When the value of vRtrMplsLspPathRecordLabel is 'record', recording of labels at each node that a LSP traverses is enabled. When … |