| 1.3.6.1.4.1.6527.3.1.2.6.4.1.1 |
vRtrMplsLspPathRowStatus | 0 | 0 |
The row status used for creation, deletion, or control of vRtrMplsLspPathTable entries. Before the row can be placed into the 'a… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.2 |
vRtrMplsLspPathLastChange | 0 | 0 |
The sysUpTime when this row was last modified. |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.3 |
vRtrMplsLspPathType | 0 | 0 |
This variable is an enum that represents the role this path is taking within this LSP. |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.4 |
vRtrMplsLspPathCos | 0 | 0 |
The configured Class Of Service (COS) for this path. If the value is between 0 and 7 inclusive, this value will be inserted in t… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.5 |
vRtrMplsLspPathProperties | 0 | 0 |
The set of configured properties for this path expressed as a bit map. For example, if the path is an adaptive path, the bit cor… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.6 |
vRtrMplsLspPathBandwidth | 0 | 0 |
The value of vRtrMplsLspPathBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) to be reserved for this L… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.7 |
vRtrMplsLspPathBwProtect | 0 | 0 |
When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth protection is enabled on a LSP. LSPs that reserve bandwidth will … |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.8 |
vRtrMplsLspPathState | 0 | 0 |
The current working state of this path within this LSP. |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.9 |
vRtrMplsLspPathPreference | 0 | 0 |
When there is no path in the LSP with vRtrMplsLspPathType value of 'primary', 'secondary' type paths of this LSP with the same va… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.10 |
vRtrMplsLspPathCosSource | 0 | 0 |
When vRtrMplsLspPathCosSource is set to 'true', the value of vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService. W… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.11 |
vRtrMplsLspPathClassOfService | 0 | 0 |
The name of the class of service value to be assigned to all packets on the LSP is specified with vRtrMplsLspPathClassOfService. … |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.12 |
vRtrMplsLspPathSetupPriority | 0 | 0 |
The value of vRtrMplsLspPathSetupPriority specifies the setup priority to use when insufficient bandwidth is available to setup a… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.13 |
vRtrMplsLspPathHoldPriority | 0 | 0 |
The value of vRtrMplsLspPathHoldPriority specifies the hold priority to use when insufficient bandwidth is available to setup a L… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.14 |
vRtrMplsLspPathRecord | 0 | 0 |
When the value of vRtrMplsLspPathRecord is 'record', recording of all the hops that a LSP traverses is enabled. When the value o… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.15 |
vRtrMplsLspPathHopLimit | 0 | 0 |
The value of vRtrMplsLspPathHopLimit specifies the maximum number of hops that a LSP will traverse including the ingress and egre… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.16 |
vRtrMplsLspPathSharing | 0 | 0 |
When vRtrMplsLspPathSharing has a value of 'true', path-sharing is enabled for the secondary path. Path-sharing is used to contr… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.17 |
vRtrMplsLspPathAdminState | 0 | 0 |
The desired administrative state for this LSP path. |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.18 |
vRtrMplsLspPathOperState | 0 | 0 |
The current operational state of this LSP path. |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.19 |
vRtrMplsLspPathInheritance | 0 | 0 |
For each writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrMplsLsp… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.20 |
vRtrMplsLspPathLspId | 0 | 0 |
This value identifies the label switched path that is signaled for this entry. |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.21 |
vRtrMplsLspPathRetryTimeRemaining | 0 | 0 |
The time in 10-millisecond units to signal this path. |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.22 |
vRtrMplsLspPathTunnelARHopListIndex | 0 | 0 |
Primary index into the mplsTunnelARHopTable identifying a particular recorded hop list. A value of 0 implies that there is no rec… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.23 |
vRtrMplsLspPathNegotiatedMTU | 0 | 0 |
The value of vRtrMplsLspPathNegotiatedMTU specifies the size for the Maximum transmission unit (MTU) that is negotiated during es… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.24 |
vRtrMplsLspPathFailCode | 0 | 0 |
The value of vRtrMplsLspPathFailCode specifies the reason code for LSP Path failure. A value of 0 indicates that no failure has o… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.25 |
vRtrMplsLspPathFailNodeAddr | 0 | 0 |
The value of vRtrMplsLspPathFailNodeAddr specifies the IP address of the node in the LSP path at which the LSP path failed. When … |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.26 |
vRtrMplsLspPathAdminGroupInclude | 0 | 0 |
The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that specifies a list of admin groups that should be included when thi… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.27 |
vRtrMplsLspPathAdminGroupExclude | 0 | 0 |
The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that specifies a list of admin groups that should be excluded when thi… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.28 |
vRtrMplsLspPathAdaptive | 0 | 0 |
Setting the value of vRtrMplsLspPathAdaptive to 'true', enables make-before-break functionality for the LSP path. Setting the va… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.29 |
vRtrMplsLspPathOptimizeTimer | 0 | 0 |
The value of vRtrMplsLspPathOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimiz… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.30 |
vRtrMplsLspPathNextOptimize | 0 | 0 |
The value of vRtrMplsLspPathNextOptimize specifies the current value of the optimize timer. This is the time, in seconds, remain… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.31 |
vRtrMplsLspPathOperBandwidth | 0 | 0 |
The value of vRtrMplsLspPathOperBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) that has been reserv… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.32 |
vRtrMplsLspPathMBBState | 0 | 0 |
The value of vRtrMplsLspPathMBBState specifies the state of the most recent invocation of the make-before-break functionality.
Po… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.33 |
vRtrMplsLspPathResignal | 0 | 0 |
Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers the re-signaling of the LSP path.
If the LSP path is operatio… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.34 |
vRtrMplsLspPathTunnelCRHopListIndex | 0 | 0 |
Primary index into the vRtrMplsTunnelCHopTable identifying a particular computed hop list. A value of 0 implies that there is no … |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.35 |
vRtrMplsLspPathOperMTU | 0 | 0 |
The value of vRtrMplsLspPathOperMTU specifies the size for the Maximum transmission unit (MTU) that is currently operation for th… |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.36 |
vRtrMplsLspPathRecordLabel | 0 | 0 |
When the value of vRtrMplsLspPathRecordLabel is 'record', recording of labels at each node that a LSP traverses is enabled. When … |
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.37 |
vRtrMplsLspPathSrlg | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.38 |
vRtrMplsLspPathSrlgDisjoint | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.39 |
vRtrMplsLspPathLastResigAttempt | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.40 |
vRtrMplsLspPathMetric | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.41 |
vRtrMplsLspPathLastMBBType | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.42 |
vRtrMplsLspPathLastMBBEnd | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.43 |
vRtrMplsLspPathLastMBBMetric | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.44 |
vRtrMplsLspPathLastMBBState | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.45 |
vRtrMplsLspPathMBBTypeInProg | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.46 |
vRtrMplsLspPathMBBStarted | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.47 |
vRtrMplsLspPathMBBNextRetry | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.48 |
vRtrMplsLspPathMBBRetryAttempts | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.49 |
vRtrMplsLspPathMBBFailCode | 0 | 0 |
|
| 1.3.6.1.4.1.6527.3.1.2.6.4.1.51 |
vRtrMplsLspPathMBBFailNodeAddr | 0 | 0 |
|