The value of vRtrLdpIfMaxBackoffTime specifies the maximum
value for the backoff interval.
For each successive failure of the LDP session startup, the
backoff interval (the time for which the router waits before
retrying) increases exponentially. If the backoff interval
exceeds vRtrLdpIfMaxBackoffTime, the router will give
up trying to establish the LDP session.
If vRtrLdpIfMaxBackoffTime is set to zero (0), then the
backoff interval does not increase exponentially after the
first session startup attempt fails. Instead it remains
constant and LDP will keep retrying to establish a session
until it succeeds.
Parsed from file TIMETRA-LDP-MIB.mib
Module: TIMETRA-LDP-MIB
vRtrLdpIfMaxBackoffTime OBJECT-TYPE SYNTAX TmnxLdpBackoffTime UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrLdpIfMaxBackoffTime specifies the maximum value for the backoff interval. For each successive failure of the LDP session startup, the backoff interval (the time for which the router waits before retrying) increases exponentially. If the backoff interval exceeds vRtrLdpIfMaxBackoffTime, the router will give up trying to establish the LDP session. If vRtrLdpIfMaxBackoffTime is set to zero (0), then the backoff interval does not increase exponentially after the first session startup attempt fails. Instead it remains constant and LDP will keep retrying to establish a session until it succeeds." DEFVAL { 120 } ::= { vRtrLdpIfEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.1 | vRtrLdpIfIndex | 0 | 0 | vRtrLdpIfIndex is an index for the row entry and is used mutually exclusively with the vRtrLdpPeerAddress field. If the vRtrLdpPe… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.2 | vRtrLdpPeerAddress | 0 | 0 | vRtrLdpPeerAddress is an index for the row entry and is used mutually exclusively with the vRtrLdpIfIndex field. If the vRtrLdpIf… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.3 | vRtrLdpIfRowStatus | 0 | 0 | vRtrLdpIfRowStatus is used to control the creation and deletion of rows in the vRtrLdpIfTable. A row can be created by setting vR… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.4 | vRtrLdpIfLastChange | 0 | 0 | The value of vRtrLdpIfLastChange specifies the sysUpTime when this row was last modified. |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.5 | vRtrLdpIfAdminState | 0 | 0 | The value of vRtrLdpIfAdminState indicates the desired administrative state for LDP on this interface or targeted peer. |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.6 | vRtrLdpIfOperState | 0 | 0 | The value of vRtrLdpIfOperState specifies the current operational state of LDP on this interface or targeted peer. |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.7 | vRtrLdpIfInheritance | 0 | 0 | Some writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrLdpGeneralT… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.8 | vRtrLdpIfKeepAliveFactor | 0 | 0 | The value of vRtrLdpIfKeepAliveFactor specifies the value by which the keepalive timeout (vRtrLdpIfKeepAliveTimeout) should be d… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.9 | vRtrLdpIfKeepAliveTimeout | 0 | 0 | The value of vRtrLdpIfKeepAliveTimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.10 | vRtrLdpIfHelloFactor | 0 | 0 | The value of vRtrLdpIfHelloFactor specifies the value by which the hello timeout (vRtrLdpIfHelloTimeout) should be divided to giv… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.11 | vRtrLdpIfHelloTimeout | 0 | 0 | The value of vRtrLdpIfHelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LD… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.12 | vRtrLdpIfBackoffTime | 0 | 0 | The value of vRtrLdpIfBackoffTime specifies the initial value for the backoff interval. The backoff interval is the time, in sec… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.14 | vRtrLdpIfTransportAddrType | 0 | 0 | The value of vRtrLdpIfTransportAddrType specifies the source of the transport address to be used when setting up the LDP TCP sess… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.15 | vRtrLdpIfPassiveMode | 0 | 0 | The value of vRtrLdpIfPassiveMode specifies the mode used for setting up LDP sessions. This object is meaningful only in case of … |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.16 | vRtrLdpIfAutoCreate | 0 | 0 | The value of vRtrLdpIfAutoCreate specifies whether or not the row entry represents a targeted peer that was automatically created… |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.17 | vRtrLdpIfOperDownReason | 0 | 0 | The value of vRtrLdpIfOperDownReason specifies the reason that the LDP interface or targeted peer is operationally down. |
| 1.3.6.1.4.1.6527.3.1.2.8.5.1.18 | vRtrLdpIfTunneling | 0 | 0 | The value of vRtrLdpIfTunneling specifies whether tunneling of LDP over tunnels is enabled. When this object has a value of 'tru… |