The value of vRtrLdpIfTransportAddrType specifies the source
of the transport address to be used when setting up the LDP TCP
sessions. This value is meaningful only in case of LDP
interfaces and not for targeted peers.
When the value of this object is 'interface', the interface's
IP address is used to setup the LDP session between neighbors.
If multiple interfaces exist between two neighbors, the
'interface' mode cannot be used since only one LDP session is
actually set up between the two neighbors.
When the value of this object is 'system', the system's IP address
is used to set up the LDP session between neighbors.
Parsed from file TIMETRA-LDP-MIB.mib
Module: TIMETRA-LDP-MIB
vRtrLdpIfTransportAddrType OBJECT-TYPE SYNTAX INTEGER { interface (1), system (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrLdpIfTransportAddrType specifies the source of the transport address to be used when setting up the LDP TCP sessions. This value is meaningful only in case of LDP interfaces and not for targeted peers. When the value of this object is 'interface', the interface's IP address is used to setup the LDP session between neighbors. If multiple interfaces exist between two neighbors, the 'interface' mode cannot be used since only one LDP session is actually set up between the two neighbors. When the value of this object is 'system', the system's IP address is used to set up the LDP session between neighbors." DEFVAL { system } ::= { vRtrLdpIfEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.8.5.1.1 | vRtrLdpIfIndex | 0 | 0 | vRtrLdpIfIndex is an index for the row entry and is used mutually exclusively with the vRtrLdpPeerAddress field. If the vRtrLdpPe… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.2 | vRtrLdpPeerAddress | 0 | 0 | vRtrLdpPeerAddress is an index for the row entry and is used mutually exclusively with the vRtrLdpIfIndex field. If the vRtrLdpIf… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.3 | vRtrLdpIfRowStatus | 0 | 0 | vRtrLdpIfRowStatus is used to control the creation and deletion of rows in the vRtrLdpIfTable. A row can be created by setting vR… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.4 | vRtrLdpIfLastChange | 0 | 0 | The value of vRtrLdpIfLastChange specifies the sysUpTime when this row was last modified. |
1.3.6.1.4.1.6527.3.1.2.8.5.1.5 | vRtrLdpIfAdminState | 0 | 0 | The value of vRtrLdpIfAdminState indicates the desired administrative state for LDP on this interface or targeted peer. |
1.3.6.1.4.1.6527.3.1.2.8.5.1.6 | vRtrLdpIfOperState | 0 | 0 | The value of vRtrLdpIfOperState specifies the current operational state of LDP on this interface or targeted peer. |
1.3.6.1.4.1.6527.3.1.2.8.5.1.7 | vRtrLdpIfInheritance | 0 | 0 | Some writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrLdpGeneralT… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.8 | vRtrLdpIfKeepAliveFactor | 0 | 0 | The value of vRtrLdpIfKeepAliveFactor specifies the value by which the keepalive timeout (vRtrLdpIfKeepAliveTimeout) should be d… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.9 | vRtrLdpIfKeepAliveTimeout | 0 | 0 | The value of vRtrLdpIfKeepAliveTimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.10 | vRtrLdpIfHelloFactor | 0 | 0 | The value of vRtrLdpIfHelloFactor specifies the value by which the hello timeout (vRtrLdpIfHelloTimeout) should be divided to giv… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.11 | vRtrLdpIfHelloTimeout | 0 | 0 | The value of vRtrLdpIfHelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LD… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.12 | vRtrLdpIfBackoffTime | 0 | 0 | The value of vRtrLdpIfBackoffTime specifies the initial value for the backoff interval. The backoff interval is the time, in sec… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.13 | vRtrLdpIfMaxBackoffTime | 0 | 0 | The value of vRtrLdpIfMaxBackoffTime specifies the maximum value for the backoff interval. For each successive failure of the LDP… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.15 | vRtrLdpIfPassiveMode | 0 | 0 | The value of vRtrLdpIfPassiveMode specifies the mode used for setting up LDP sessions. This object is meaningful only in case of … |
1.3.6.1.4.1.6527.3.1.2.8.5.1.16 | vRtrLdpIfAutoCreate | 0 | 0 | The value of vRtrLdpIfAutoCreate specifies whether or not the row entry represents a targeted peer that was automatically created… |
1.3.6.1.4.1.6527.3.1.2.8.5.1.17 | vRtrLdpIfOperDownReason | 0 | 0 | The value of vRtrLdpIfOperDownReason specifies the reason that the LDP interface or targeted peer is operationally down. |
1.3.6.1.4.1.6527.3.1.2.8.5.1.18 | vRtrLdpIfTunneling | 0 | 0 | The value of vRtrLdpIfTunneling specifies whether tunneling of LDP over tunnels is enabled. When this object has a value of 'tru… |