A tmnxHwConfigChange notification is generated when the value of
tmnxHwLastChange is updated. It can be used by the NMS to trigger
maintenance polls of the hardware configuration information.
Only one tmnxHwConfigChange notification event will be generated
in a 5 second throttling time period. A notification event is
the transmission of a single trap to a list of notification
destinations configured in the SNMP-TARGET-MIB.
If additional hardware configuration change occurs within the
throttling period, the notification events for these changes are
suppressed until the throttling period expires. At the end of
the throttling period, one notification event is generated if
any addition configuration changes occurred within the just
completed throttling period and another throttling period is
started.
The NMS should periodically check the value of tmnxHwConfigChange
to detect any missed tmnxHwConfigChange traps.
This notification was made obsolete in the 2.1 release.
The tmnxHwConfigChange notification has been replaced
with the generic change notifications from the
TIMETRA-SYSTEM-MIB: tmnxConfigModify, tmnxConfigCreate,
tmnxConfigDelete, tmnxStateChange.
Parsed from file TIMETRA-CHASSIS-MIB.mib
Module: TIMETRA-CHASSIS-MIB
tmnxHwConfigChange NOTIFICATION-TYPE OBJECTS { tmnxChassisNotifyHwIndex, tmnxHwID, tmnxHwClass } STATUS obsolete DESCRIPTION "A tmnxHwConfigChange notification is generated when the value of tmnxHwLastChange is updated. It can be used by the NMS to trigger maintenance polls of the hardware configuration information. Only one tmnxHwConfigChange notification event will be generated in a 5 second throttling time period. A notification event is the transmission of a single trap to a list of notification destinations configured in the SNMP-TARGET-MIB. If additional hardware configuration change occurs within the throttling period, the notification events for these changes are suppressed until the throttling period expires. At the end of the throttling period, one notification event is generated if any addition configuration changes occurred within the just completed throttling period and another throttling period is started. The NMS should periodically check the value of tmnxHwConfigChange to detect any missed tmnxHwConfigChange traps. This notification was made obsolete in the 2.1 release. The tmnxHwConfigChange notification has been replaced with the generic change notifications from the TIMETRA-SYSTEM-MIB: tmnxConfigModify, tmnxConfigCreate, tmnxConfigDelete, tmnxStateChange." ::= { tmnxChassisNotification 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.2 | tmnxEnvTempTooHigh | 0 | 0 | Generated when the temperature sensor reading on an equipment object is greater than its configured threshold. |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.3 | tmnxEqPowerSupplyFailure | 0 | 0 | Generated when one of the chassis's power supplies fails. |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.4 | tmnxEqPowerSupplyInserted | 0 | 0 | Generated when one of the chassis's power supplies is inserted. |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.5 | tmnxEqPowerSupplyRemoved | 0 | 0 | Generated when one of the chassis's power supplies is removed. |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.6 | tmnxEqFanFailure | 0 | 0 | Generated when one of the fans in a fan tray has failed. |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.7 | tmnxEqCardFailure | 0 | 0 | Generated when one of the cards in a chassis has failed. The card type may be IOM, Fabric, MDA, MCM, CCM, CPM module, compact f… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.8 | tmnxEqCardInserted | 0 | 0 | Generated when a card is inserted into the chassis. The card type may be IOM, Fabric, MDA, MCM, CCM CPM module, compact flash m… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.9 | tmnxEqCardRemoved | 0 | 0 | Generated when a card is removed from the chassis. The card type may be IOM, Fabric, MDA, MCM, CCM, CPM module, compact flash m… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.10 | tmnxEqWrongCard | 0 | 0 | Generated when the wrong type of card is inserted into a slot of the chassis. Even though a card may be physically supported by… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.11 | tmnxEqCpuFailure | 0 | 0 | Generated when a failure is detected for a CPU on an IOM card or CPM module. This notification was made obsolete in the 2.1 relea… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.12 | tmnxEqMemoryFailure | 0 | 0 | Generated when a memory module failure is detected for an IOM card or CPM module. This notification was made obsolete in the 2.1 … |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.13 | tmnxEqBackdoorBusFailure | 0 | 0 | Generated when the backdoor bus has failed. This notification was made obsolete in the 2.1 release. |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.14 | tmnxPeSoftwareError | 0 | 0 | Generated when a software error has been detected. This notification was made obsolete in the 2.1 release. Many of the other not… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.15 | tmnxPeSoftwareAbnormalHalt | 0 | 0 | Generated when the software has abnormally terminated. This notification was made obsolete in the 2.1 release. Many of the other… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.16 | tmnxPeSoftwareVersionMismatch | 0 | 0 | Generated when there is a mismatch between software versions of the active CPM and standby CPM or the CPM and IOM. tmnxChassisNot… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.17 | tmnxPeOutOfMemory | 0 | 0 | Generated when there is an out of memory error detected. This notification was made obsolete in the 2.1 release. The tmnxPeOutOf… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.18 | tmnxPeConfigurationError | 0 | 0 | Generated when a configuration error has been detected. This notification was made obsolete in the 2.1 release. Many other notif… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.19 | tmnxPeStorageProblem | 0 | 0 | Generated when there is a storage capacity problem. This notification was made obsolete in the 2.1 release. The only 'storage' d… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.20 | tmnxPeCpuCyclesExceeded | 0 | 0 | Generated when the CPU cycle usage limit has been exceeded. This notification was made obsolete in the 2.1 release. It does not … |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.21 | tmnxRedPrimaryCPMFail | 0 | 0 | Generated when the primary CPM fails. |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.22 | tmnxRedSecondaryCPMStatusChange | 0 | 0 | Generated when there is a change in the secondary CPM status. This notification was made obsolete in the 2.1 release. There is n… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.23 | tmnxRedRestoreSuccess | 0 | 0 | Generated when the secondary CPM successfully restores the config and state. This notification was made obsolete in the 2.1 relea… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.24 | tmnxRedRestoreFail | 0 | 0 | Generated when the secondary CPM fails to restore the config and state. This notification was made obsolete in the 2.1 release. I… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.25 | tmnxChassisNotificationClear | 0 | 0 | A trap indicating the clear of a chassis notification identified by tmnxChassisNotifyOID. |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.26 | tmnxEqSyncIfTimingHoldover | 0 | 0 | Generated when the synchronous equipment timing subsystem transitions into a holdover state. This notification will have the same… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.27 | tmnxEqSyncIfTimingHoldoverClear | 0 | 0 | Generated when the synchronous equipment timing subsystem transitions out of the holdover state. This notification will have the … |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.28 | tmnxEqSyncIfTimingRef1Alarm | 0 | 0 | Generated when an alarm condition on the first timing reference is detected. This notification will have the same indices as thos… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.29 | tmnxEqSyncIfTimingRef1AlarmClear | 0 | 0 | Generated when an alarm condition on the first timing reference is cleared. This notification will have the same indices as those… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.30 | tmnxEqSyncIfTimingRef2Alarm | 0 | 0 | Generated when an alarm condition on the second timing reference is detected. This notification will have the same indices as tho… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.31 | tmnxEqSyncIfTimingRef2AlarmClear | 0 | 0 | Generated when an alarm condition on the second timing reference is cleared. This notification will have the same indices as thos… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.32 | tmnxEqFlashDataLoss | 0 | 0 | tmnxEqFlashDataLoss is generated when there was an error while data was getting written on to the compact flash. This notificatio… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.33 | tmnxEqFlashDiskFull | 0 | 0 | tmnxEqFlashDiskFull is generated when there is no space left on the compact flash. No more data can be written to it. |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.34 | tmnxPeSoftwareLoadFailed | 0 | 0 | Generated when the CPM fails to load the software from a specified location. tmnxChassisNotifyHwIndex identifies the card for whi… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.35 | tmnxPeBootloaderVersionMismatch | 0 | 0 | Generated when there is a mismatch between the CPM and boot loader versions. tmnxChassisNotifyHwIndex identifies the CPM card. tm… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.36 | tmnxPeBootromVersionMismatch | 0 | 0 | Generated when there is a mismatch between the boot rom versions. tmnxChassisNotifyHwIndex identifies the IOM card. tmnxChassisNo… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.37 | tmnxPeFPGAVersionMismatch | 0 | 0 | Generated when there is a mismatch between the FPGA versions. tmnxChassisNotifyHwIndex identifies the IOM card. tmnxChassisNotify… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.38 | tmnxEqSyncIfTimingBITSAlarm | 0 | 0 | Generated when an alarm condition on the BITS timing reference is detected. This notification will have the same indices as those… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.39 | tmnxEqSyncIfTimingBITSAlarmClear | 0 | 0 | Generated when an alarm condition on the BITS timing reference is cleared. This notification will have the same indices as those … |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.40 | tmnxEqCardFirmwareUpgraded | 0 | 0 | Generated when a card is hot-inserted into the chassis and its firmware is automatically upgraded. The card type may be IOM or C… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.41 | tmnxChassisUpgradeInProgress | 0 | 0 | The tmnxChassisUpgradeInProgress notification is generated only after a CPM switchover occurs and the new active CPM is running … |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.42 | tmnxChassisUpgradeComplete | 0 | 0 | The tmnxChassisUpgradeComplete notification is generated to indicate that all the IOMs are running matching software version in r… |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.43 | tmnxChassisHiBwMcastAlarm | 0 | 0 | The tmnxChassisHiBwMcastAlarm notification is generated when a plane is shared by more than one high bandwidth multicast tap. |
| 1.3.6.1.4.1.6527.3.1.3.2.1.0.44 | tmnxEqMdaCfgNotCompatible | 0 | 0 | Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but t… |