Generated when the CPM fails to load the software from a specified
location.
tmnxChassisNotifyHwIndex identifies the card for which the software
load failed and tmnxChassisNotifySoftwareLocation contains the
location from where the software load was attempted.
Parsed from file TIMETRA-CHASSIS-MIB.mib
Module: TIMETRA-CHASSIS-MIB
tmnxPeSoftwareLoadFailed NOTIFICATION-TYPE OBJECTS { tmnxChassisNotifyHwIndex, tmnxHwID, tmnxHwClass, tmnxChassisNotifySoftwareLocation } STATUS current DESCRIPTION "Generated when the CPM fails to load the software from a specified location. tmnxChassisNotifyHwIndex identifies the card for which the software load failed and tmnxChassisNotifySoftwareLocation contains the location from where the software load was attempted." ::= { tmnxChassisNotification 34 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.3.2.1.0.1 | tmnxHwConfigChange | 0 | 0 | A tmnxHwConfigChange notification is generated when the value of tmnxHwLastChange is updated. It can be used by the NMS to trig… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.2 | tmnxEnvTempTooHigh | 0 | 0 | Generated when the temperature sensor reading on an equipment object is greater than its configured threshold. |
1.3.6.1.4.1.6527.3.1.3.2.1.0.3 | tmnxEqPowerSupplyFailure | 0 | 0 | Generated when one of the chassis's power supplies fails. |
1.3.6.1.4.1.6527.3.1.3.2.1.0.4 | tmnxEqPowerSupplyInserted | 0 | 0 | Generated when one of the chassis's power supplies is inserted. |
1.3.6.1.4.1.6527.3.1.3.2.1.0.5 | tmnxEqPowerSupplyRemoved | 0 | 0 | Generated when one of the chassis's power supplies is removed. |
1.3.6.1.4.1.6527.3.1.3.2.1.0.6 | tmnxEqFanFailure | 0 | 0 | Generated when one of the fans in a fan tray has failed. |
1.3.6.1.4.1.6527.3.1.3.2.1.0.7 | tmnxEqCardFailure | 0 | 0 | Generated when one of the cards in a chassis has failed. The card type may be IOM, Fabric, MDA, MCM, CCM, CPM module, compact f… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.8 | tmnxEqCardInserted | 0 | 0 | Generated when a card is inserted into the chassis. The card type may be IOM, Fabric, MDA, MCM, CCM CPM module, compact flash m… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.9 | tmnxEqCardRemoved | 0 | 0 | Generated when a card is removed from the chassis. The card type may be IOM, Fabric, MDA, MCM, CCM, CPM module, compact flash m… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.10 | tmnxEqWrongCard | 0 | 0 | Generated when the wrong type of card is inserted into a slot of the chassis. Even though a card may be physically supported by… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.11 | tmnxEqCpuFailure | 0 | 0 | Generated when a failure is detected for a CPU on an IOM card or CPM module. This notification was made obsolete in the 2.1 relea… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.12 | tmnxEqMemoryFailure | 0 | 0 | Generated when a memory module failure is detected for an IOM card or CPM module. This notification was made obsolete in the 2.1 … |
1.3.6.1.4.1.6527.3.1.3.2.1.0.13 | tmnxEqBackdoorBusFailure | 0 | 0 | Generated when the backdoor bus has failed. This notification was made obsolete in the 2.1 release. |
1.3.6.1.4.1.6527.3.1.3.2.1.0.14 | tmnxPeSoftwareError | 0 | 0 | Generated when a software error has been detected. This notification was made obsolete in the 2.1 release. Many of the other not… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.15 | tmnxPeSoftwareAbnormalHalt | 0 | 0 | Generated when the software has abnormally terminated. This notification was made obsolete in the 2.1 release. Many of the other… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.16 | tmnxPeSoftwareVersionMismatch | 0 | 0 | Generated when there is a mismatch between software versions of the active CPM and standby CPM or the CPM and IOM. tmnxChassisNot… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.17 | tmnxPeOutOfMemory | 0 | 0 | Generated when there is an out of memory error detected. This notification was made obsolete in the 2.1 release. The tmnxPeOutOf… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.18 | tmnxPeConfigurationError | 0 | 0 | Generated when a configuration error has been detected. This notification was made obsolete in the 2.1 release. Many other notif… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.19 | tmnxPeStorageProblem | 0 | 0 | Generated when there is a storage capacity problem. This notification was made obsolete in the 2.1 release. The only 'storage' d… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.20 | tmnxPeCpuCyclesExceeded | 0 | 0 | Generated when the CPU cycle usage limit has been exceeded. This notification was made obsolete in the 2.1 release. It does not … |
1.3.6.1.4.1.6527.3.1.3.2.1.0.21 | tmnxRedPrimaryCPMFail | 0 | 0 | Generated when the primary CPM fails. |
1.3.6.1.4.1.6527.3.1.3.2.1.0.22 | tmnxRedSecondaryCPMStatusChange | 0 | 0 | Generated when there is a change in the secondary CPM status. This notification was made obsolete in the 2.1 release. There is n… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.23 | tmnxRedRestoreSuccess | 0 | 0 | Generated when the secondary CPM successfully restores the config and state. This notification was made obsolete in the 2.1 relea… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.24 | tmnxRedRestoreFail | 0 | 0 | Generated when the secondary CPM fails to restore the config and state. This notification was made obsolete in the 2.1 release. I… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.25 | tmnxChassisNotificationClear | 0 | 0 | A trap indicating the clear of a chassis notification identified by tmnxChassisNotifyOID. |
1.3.6.1.4.1.6527.3.1.3.2.1.0.26 | tmnxEqSyncIfTimingHoldover | 0 | 0 | Generated when the synchronous equipment timing subsystem transitions into a holdover state. This notification will have the same… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.27 | tmnxEqSyncIfTimingHoldoverClear | 0 | 0 | Generated when the synchronous equipment timing subsystem transitions out of the holdover state. This notification will have the … |
1.3.6.1.4.1.6527.3.1.3.2.1.0.28 | tmnxEqSyncIfTimingRef1Alarm | 0 | 0 | Generated when an alarm condition on the first timing reference is detected. This notification will have the same indices as thos… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.29 | tmnxEqSyncIfTimingRef1AlarmClear | 0 | 0 | Generated when an alarm condition on the first timing reference is cleared. This notification will have the same indices as those… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.30 | tmnxEqSyncIfTimingRef2Alarm | 0 | 0 | Generated when an alarm condition on the second timing reference is detected. This notification will have the same indices as tho… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.31 | tmnxEqSyncIfTimingRef2AlarmClear | 0 | 0 | Generated when an alarm condition on the second timing reference is cleared. This notification will have the same indices as thos… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.32 | tmnxEqFlashDataLoss | 0 | 0 | tmnxEqFlashDataLoss is generated when there was an error while data was getting written on to the compact flash. This notificatio… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.33 | tmnxEqFlashDiskFull | 0 | 0 | tmnxEqFlashDiskFull is generated when there is no space left on the compact flash. No more data can be written to it. |
1.3.6.1.4.1.6527.3.1.3.2.1.0.35 | tmnxPeBootloaderVersionMismatch | 0 | 0 | Generated when there is a mismatch between the CPM and boot loader versions. tmnxChassisNotifyHwIndex identifies the CPM card. tm… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.36 | tmnxPeBootromVersionMismatch | 0 | 0 | Generated when there is a mismatch between the boot rom versions. tmnxChassisNotifyHwIndex identifies the IOM card. tmnxChassisNo… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.37 | tmnxPeFPGAVersionMismatch | 0 | 0 | Generated when there is a mismatch between the FPGA versions. tmnxChassisNotifyHwIndex identifies the IOM card. tmnxChassisNotify… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.38 | tmnxEqSyncIfTimingBITSAlarm | 0 | 0 | Generated when an alarm condition on the BITS timing reference is detected. This notification will have the same indices as those… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.39 | tmnxEqSyncIfTimingBITSAlarmClear | 0 | 0 | Generated when an alarm condition on the BITS timing reference is cleared. This notification will have the same indices as those … |
1.3.6.1.4.1.6527.3.1.3.2.1.0.40 | tmnxEqCardFirmwareUpgraded | 0 | 0 | Generated when a card is hot-inserted into the chassis and its firmware is automatically upgraded. The card type may be IOM or C… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.41 | tmnxChassisUpgradeInProgress | 0 | 0 | The tmnxChassisUpgradeInProgress notification is generated only after a CPM switchover occurs and the new active CPM is running … |
1.3.6.1.4.1.6527.3.1.3.2.1.0.42 | tmnxChassisUpgradeComplete | 0 | 0 | The tmnxChassisUpgradeComplete notification is generated to indicate that all the IOMs are running matching software version in r… |
1.3.6.1.4.1.6527.3.1.3.2.1.0.43 | tmnxChassisHiBwMcastAlarm | 0 | 0 | The tmnxChassisHiBwMcastAlarm notification is generated when a plane is shared by more than one high bandwidth multicast tap. |
1.3.6.1.4.1.6527.3.1.3.2.1.0.44 | tmnxEqMdaCfgNotCompatible | 0 | 0 | Generated when a supported MDA is inserted into a slot of an IOM, the MDA is compatible with the currently provisioned MDA, but t… |