Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mesErpProtState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"undefined",
"(",
"0",
")",
",",
"starting",
"(",
"1",
")",
",",
"idle",
"(",
"2",
")",
",",
"protection",
"(",
"3",
")",
",",
"manualSwitch",
"(",
"4",
")",
",",
"forcedSwitch",
"(",
"5",
")",
",",
"pending",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicates the protection state of the ring. Starting - The ring is in start-up phase. Idle - No failure has been detected and the Ring Protection Link (RPL) is carrying no traffic. Protection - A failure has been detected and the ring has entered protection state and blocked off failed ring links. Manual switch - A 'Manual switch' command induces a block on a ring port. The manual switch will be disregarded if the ring detects a failure or if the ring is in protection state. Forced switch - A 'Forced switch' command forces a block on a ring port disregarding the ring state. Pending - Wait state when returning from a protection switch or clear an operator command. Ring will stay in the state until a clear command is issued if in non-revertive mode. If ring is in revertive mode the state will change to idle when timers have elapsed. \"",
"::=",
"{",
"mesErpEntry",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"undefined",
0
],
[
"starting",
1
],
[
"idle",
2
],
[
"protection",
3
],
[
"manualSwitch",
4
],
[
"forcedSwitch",
5
],
[
"pending",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicates the protection state of the ring. Starting - The ring is in start-up phase. Idle - No failure has been detected and the Ring Protection Link (RPL) is carrying no traffic. Protection - A failure has been detected and the ring has entered protection state and blocked off failed ring links. Manual switch - A 'Manual switch' command induces a block on a ring port. The manual switch will be disregarded if the ring detects a failure or if the ring is in protection state. Forced switch - A 'Forced switch' command forces a block on a ring port disregarding the ring state. Pending - Wait state when returning from a protection switch or clear an operator command. Ring will stay in the state until a clear command is issued if in non-revertive mode. If ring is in revertive mode the state will change to idle when timers have elapsed."
],
null,
null,
null,
null
]
}