Index into the mplsTunnelARHopTable that identifies the
actual hops traversed to this destination of the P2MP
tunnel. This is automatically updated by the agent when the
actual hops becomes available.
If this destination is the destination of the 'first S2L
sub-LSP' then this path will be signaled in the Recorded
Route Object. If this destination is the destination of a
'subsequent S2L sub-LSP' then this path will be signaled in
a Secondary Recorded Route Object.
Parsed from file CISCO-IETF-MPLS-TE-P2MP-STD-MIB.mib
Module: CISCO-IETF-MPLS-TE-P2MP-STD-MIB
Index into the mplsTunnelARHopTable that identifies the
actual hops traversed to this destination of the P2MP
tunnel. This is automatically updated by the agent when the
actual hops becomes available.
If this destination is the destination of the 'first S2L
sub-LSP' then this path will be signaled in the Recorded
Route Object. If this destination is the destination of a
'subsequent S2L sub-LSP' then this path will be signaled in
a Secondary Recorded Route Object.
Index into the mplsTunnelARHopTable that identifies the
actual hops traversed to this destination of the P2MP
tunnel. This is automatically updated by the agent when the
actual hops becomes available.
If this destination is the destination of the 'first S2L
sub-LSP' then this path will be signaled in the Recorded
Route Object. If this destination is the destination of a
'subsequent S2L sub-LSP' then this path will be signaled in
a Secondary Recorded Route Object.
Parsed from file CISCO-IETF-MPLS-TE-P2MP-STD-MIB.my.txt
Company: None
Module: CISCO-IETF-MPLS-TE-P2MP-STD-MIB
Index into the mplsTunnelARHopTable that identifies the
actual hops traversed to this destination of the P2MP
tunnel. This is automatically updated by the agent when the
actual hops becomes available.
If this destination is the destination of the 'first S2L
sub-LSP' then this path will be signaled in the Recorded
Route Object. If this destination is the destination of a
'subsequent S2L sub-LSP' then this path will be signaled in
a Secondary Recorded Route Object.
cmplsTeP2mpTunnelDestARHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the mplsTunnelARHopTable that identifies the actual hops traversed to this destination of the P2MP tunnel. This is automatically updated by the agent when the actual hops becomes available. If this destination is the destination of the 'first S2L sub-LSP' then this path will be signaled in the Recorded Route Object. If this destination is the destination of a 'subsequent S2L sub-LSP' then this path will be signaled in a Secondary Recorded Route Object." REFERENCE "RFC 4875 - Extensions to Resource Reservation Protocol - Traffic Engineering (RSVP-TE) for Point-to-Multipoint TE Label Switched Paths (LSPs), R. Aggarwal, D. Papadimitriou, and S. Yasukawa, May 2007." ::= { cmplsTeP2mpTunnelDestEntry 13 }
cmplsTeP2mpTunnelDestARHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero ACCESS read-only STATUS mandatory DESCRIPTION "Index into the mplsTunnelARHopTable that identifies the actual hops traversed to this destination of the P2MP tunnel. This is automatically updated by the agent when the actual hops becomes available. If this destination is the destination of the 'first S2L sub-LSP' then this path will be signaled in the Recorded Route Object. If this destination is the destination of a 'subsequent S2L sub-LSP' then this path will be signaled in a Secondary Recorded Route Object." REFERENCE "RFC 4875 - Extensions to Resource Reservation Protocol - Traffic Engineering (RSVP-TE) for Point-to-Multipoint TE Label Switched Paths (LSPs), R. Aggarwal, D. Papadimitriou, and S. Yasukawa, May 2007." ::= { cmplsTeP2mpTunnelDestEntry 13 }
Vendor: Cisco
Module: CISCO-IETF-MPLS-TE-P2MP-STD-MIB
[Automatically extracted from oidview.com]
cmplsTeP2mpTunnelDestARHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the mplsTunnelARHopTable that identifies the actual hops traversed to this destination of the P2MP tunnel. This is automatically updated by the agent when the actual hops becomes available. If this destination is the destination of the 'first S2L sub-LSP' then this path will be signaled in the Recorded Route Object. If this destination is the destination of a 'subsequent S2L sub-LSP' then this path will be signaled in a Secondary Recorded Route Object." REFERENCE "RFC 4875 - Extensions to Resource Reservation Protocol - Traffic Engineering (RSVP-TE) for Point-to-Multipoint TE Label Switched Paths (LSPs), R. Aggarwal, D. Papadimitriou, and S. Yasukawa, May 2007." ::= { cmplsTeP2mpTunnelDestEntry 13 }
cmplsTeP2mpTunnelDestARHopTableIndex OBJECT-TYPE SYNTAX MplsPathIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the mplsTunnelARHopTable that identifies the actual hops traversed to this destination of the P2MP tunnel. This is automatically updated by the agent when the actual hops becomes available. If this destination is the destination of the 'first S2L sub-LSP' then this path will be signaled in the Recorded Route Object. If this destination is the destination of a 'subsequent S2L sub-LSP' then this path will be signaled in a Secondary Recorded Route Object." REFERENCE "RFC 4875 - Extensions to Resource Reservation Protocol - Traffic Engineering (RSVP-TE) for Point-to-Multipoint TE Label Switched Paths (LSPs), R. Aggarwal, D. Papadimitriou, and S. Yasukawa, May 2007." ::= { cmplsTeP2mpTunnelDestEntry 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.142.2.3.1.1 | cmplsTeP2mpTunnelDestSrcSubGroupOriginType | 0 | 0 | This object identifies the type of address carried in cmplsTeP2mpTunnelDestSrcSubGroupOrigin. Since the object cmplsTeP2mpTunnelD… |
1.3.6.1.4.1.9.10.142.2.3.1.2 | cmplsTeP2mpTunnelDestSrcSubGroupOrigin | 0 | 0 | The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group as received on a Path message by a tra… |
1.3.6.1.4.1.9.10.142.2.3.1.3 | cmplsTeP2mpTunnelDestSrcSubGroupID | 0 | 0 | The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel as received on a Path message b… |
1.3.6.1.4.1.9.10.142.2.3.1.4 | cmplsTeP2mpTunnelDestSubGroupOriginType | 0 | 0 | This object identifies the type of address carried in cmplsTeP2mpTunnelDestSubGroupOrigin. This object must return either ipv4(1)… |
1.3.6.1.4.1.9.10.142.2.3.1.5 | cmplsTeP2mpTunnelDestSubGroupOrigin | 0 | 0 | The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group. In many cases, this will be the ingre… |
1.3.6.1.4.1.9.10.142.2.3.1.6 | cmplsTeP2mpTunnelDestSubGroupID | 0 | 0 | The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel. An appropriate value for this … |
1.3.6.1.4.1.9.10.142.2.3.1.7 | cmplsTeP2mpTunnelDestDestinationType | 0 | 0 | This object identifies the type of address carried in cmplsTeP2mpTunnelDestDestination. This object forms part of the index of th… |
1.3.6.1.4.1.9.10.142.2.3.1.8 | cmplsTeP2mpTunnelDestDestination | 0 | 0 | A single destination of this P2MP tunnel. That is, a routable TE address of a leaf. This will often be the TE Router ID of the le… |
1.3.6.1.4.1.9.10.142.2.3.1.9 | cmplsTeP2mpTunnelDestBranchOutSegment | 0 | 0 | This object identifies the outgoing branch from this LSR towards the destination represented by this table entry. It must be a un… |
1.3.6.1.4.1.9.10.142.2.3.1.10 | cmplsTeP2mpTunnelDestHopTableIndex | 0 | 0 | Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this destination of the P2MP tunnel. This obje… |
1.3.6.1.4.1.9.10.142.2.3.1.11 | cmplsTeP2mpTunnelDestPathInUse | 0 | 0 | This value denotes the configured path that was chosen as the explicit path to this destination of this P2MP tunnel. This value r… |
1.3.6.1.4.1.9.10.142.2.3.1.12 | cmplsTeP2mpTunnelDestCHopTableIndex | 0 | 0 | Index into the mplsTunnelCHopTable that identifies the explicit path for this destination of the P2MP tunnel. This path is based … |
1.3.6.1.4.1.9.10.142.2.3.1.14 | cmplsTeP2mpTunnelDestTotalUpTime | 0 | 0 | This value represents the aggregate up time for all instances of this tunnel to this destination, if this information is availabl… |
1.3.6.1.4.1.9.10.142.2.3.1.15 | cmplsTeP2mpTunnelDestInstanceUpTime | 0 | 0 | This value identifies the total time that the currently active tunnel instance to this destination has had its operational status… |
1.3.6.1.4.1.9.10.142.2.3.1.16 | cmplsTeP2mpTunnelDestPathChanges | 0 | 0 | This object counts the number of times the actual path for this destination of this P2MP tunnel instance has changed. This object… |
1.3.6.1.4.1.9.10.142.2.3.1.17 | cmplsTeP2mpTunnelDestLastPathChange | 0 | 0 | Specifies the time since the last change to the actual path for this destination of this P2MP tunnel instance. |
1.3.6.1.4.1.9.10.142.2.3.1.18 | cmplsTeP2mpTunnelDestCreationTime | 0 | 0 | Specifies the value of sysUpTime when the first instance of this tunnel came into existence for this destination. That is, when t… |
1.3.6.1.4.1.9.10.142.2.3.1.19 | cmplsTeP2mpTunnelDestStateTransitions | 0 | 0 | This object counts the number of times the status (mplsTeP2mpTunnelDestOperStatus) of this tunnel instance to this destination ha… |
1.3.6.1.4.1.9.10.142.2.3.1.20 | cmplsTeP2mpTunnelDestDiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which any one or more of this row's Counter32 objects experienced a discont… |
1.3.6.1.4.1.9.10.142.2.3.1.21 | cmplsTeP2mpTunnelDestAdminStatus | 0 | 0 | Indicates the desired operational status of this destination of this P2MP tunnel. |
1.3.6.1.4.1.9.10.142.2.3.1.22 | cmplsTeP2mpTunnelDestOperStatus | 0 | 0 | Indicates the actual operational status of this destination of this P2MP tunnel. This object may be compared to mplsTunnelOperSta… |
1.3.6.1.4.1.9.10.142.2.3.1.23 | cmplsTeP2mpTunnelDestRowStatus | 0 | 0 | This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no obje… |
1.3.6.1.4.1.9.10.142.2.3.1.24 | cmplsTeP2mpTunnelDestStorageType | 0 | 0 | The storage type for this table entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar o… |