The unique identifier assigned by the sub-group originator
for this sub-group of this P2MP tunnel as received on a Path
message by a transit or egress LSR.
The value of the sub-group identifier used on outgoing Path
messages is found in cmplsTeP2mpTunnelDestSubGroupID and is
copied from this object unless this LSR is responsible for
changing the sub-group ID.
At an ingress LSR there is no received Path message, and
this object should return zero.
Parsed from file CISCO-IETF-MPLS-TE-P2MP-STD-MIB.mib
Module: CISCO-IETF-MPLS-TE-P2MP-STD-MIB
The unique identifier assigned by the sub-group originator
for this sub-group of this P2MP tunnel as received on a Path
message by a transit or egress LSR.
The value of the sub-group identifier used on outgoing Path
messages is found in cmplsTeP2mpTunnelDestSubGroupID and is
copied from this object unless this LSR is responsible for
changing the sub-group ID.
At an ingress LSR there is no received Path message, and
this object should return zero.
The unique identifier assigned by the sub-group originator
for this sub-group of this P2MP tunnel as received on a Path
message by a transit or egress LSR.
The value of the sub-group identifier used on outgoing Path
messages is found in cmplsTeP2mpTunnelDestSubGroupID and is
copied from this object unless this LSR is responsible for
changing the sub-group ID.
At an ingress LSR there is no received Path message, and
this object should return zero.
Parsed from file CISCO-IETF-MPLS-TE-P2MP-STD-MIB.my.txt
Company: None
Module: CISCO-IETF-MPLS-TE-P2MP-STD-MIB
The unique identifier assigned by the sub-group originator
for this sub-group of this P2MP tunnel as received on a Path
message by a transit or egress LSR.
The value of the sub-group identifier used on outgoing Path
messages is found in cmplsTeP2mpTunnelDestSubGroupID and is
copied from this object unless this LSR is responsible for
changing the sub-group ID.
At an ingress LSR there is no received Path message, and
this object should return zero.
cmplsTeP2mpTunnelDestSrcSubGroupID OBJECT-TYPE SYNTAX IndexInteger (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel as received on a Path message by a transit or egress LSR. The value of the sub-group identifier used on outgoing Path messages is found in cmplsTeP2mpTunnelDestSubGroupID and is copied from this object unless this LSR is responsible for changing the sub-group ID. At an ingress LSR there is no received Path message, and this object should return zero." REFERENCE "RFC 4875 - Extensions to Resource Reservation Protocol - Traffic Engineering (RSVP-TE) for Point-to-Multipoint TE Label Switched Paths (LSPs), R. Aggarwal, D. Papadimitriou, and S. Yasukawa, May 2007." ::= { cmplsTeP2mpTunnelDestEntry 3 }
cmplsTeP2mpTunnelDestSrcSubGroupID OBJECT-TYPE SYNTAX IndexInteger(1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel as received on a Path message by a transit or egress LSR. The value of the sub-group identifier used on outgoing Path messages is found in cmplsTeP2mpTunnelDestSubGroupID and is copied from this object unless this LSR is responsible for changing the sub-group ID. At an ingress LSR there is no received Path message, and this object should return zero." REFERENCE "RFC 4875 - Extensions to Resource Reservation Protocol - Traffic Engineering (RSVP-TE) for Point-to-Multipoint TE Label Switched Paths (LSPs), R. Aggarwal, D. Papadimitriou, and S. Yasukawa, May 2007." ::= { cmplsTeP2mpTunnelDestEntry 3 }
Vendor: Cisco
Module: CISCO-IETF-MPLS-TE-P2MP-STD-MIB
[Automatically extracted from oidview.com]
cmplsTeP2mpTunnelDestSrcSubGroupID OBJECT-TYPE SYNTAX IndexInteger (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel as received on a Path message by a transit or egress LSR. The value of the sub-group identifier used on outgoing Path messages is found in cmplsTeP2mpTunnelDestSubGroupID and is copied from this object unless this LSR is responsible for changing the sub-group ID. At an ingress LSR there is no received Path message, and this object should return zero." REFERENCE "RFC 4875 - Extensions to Resource Reservation Protocol - Traffic Engineering (RSVP-TE) for Point-to-Multipoint TE Label Switched Paths (LSPs), R. Aggarwal, D. Papadimitriou, and S. Yasukawa, May 2007." ::= { cmplsTeP2mpTunnelDestEntry 3 }
cmplsTeP2mpTunnelDestSrcSubGroupID OBJECT-TYPE SYNTAX IndexInteger (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel as received on a Path message by a transit or egress LSR. The value of the sub-group identifier used on outgoing Path messages is found in cmplsTeP2mpTunnelDestSubGroupID and is copied from this object unless this LSR is responsible for changing the sub-group ID. At an ingress LSR there is no received Path message, and this object should return zero." REFERENCE "RFC 4875 - Extensions to Resource Reservation Protocol - Traffic Engineering (RSVP-TE) for Point-to-Multipoint TE Label Switched Paths (LSPs), R. Aggarwal, D. Papadimitriou, and S. Yasukawa, May 2007." ::= { cmplsTeP2mpTunnelDestEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.142.2.3.1.1 | cmplsTeP2mpTunnelDestSrcSubGroupOriginType | 0 | 0 | This object identifies the type of address carried in cmplsTeP2mpTunnelDestSrcSubGroupOrigin. Since the object cmplsTeP2mpTunnelD… |
1.3.6.1.4.1.9.10.142.2.3.1.2 | cmplsTeP2mpTunnelDestSrcSubGroupOrigin | 0 | 0 | The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group as received on a Path message by a tra… |
1.3.6.1.4.1.9.10.142.2.3.1.4 | cmplsTeP2mpTunnelDestSubGroupOriginType | 0 | 0 | This object identifies the type of address carried in cmplsTeP2mpTunnelDestSubGroupOrigin. This object must return either ipv4(1)… |
1.3.6.1.4.1.9.10.142.2.3.1.5 | cmplsTeP2mpTunnelDestSubGroupOrigin | 0 | 0 | The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group. In many cases, this will be the ingre… |
1.3.6.1.4.1.9.10.142.2.3.1.6 | cmplsTeP2mpTunnelDestSubGroupID | 0 | 0 | The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel. An appropriate value for this … |
1.3.6.1.4.1.9.10.142.2.3.1.7 | cmplsTeP2mpTunnelDestDestinationType | 0 | 0 | This object identifies the type of address carried in cmplsTeP2mpTunnelDestDestination. This object forms part of the index of th… |
1.3.6.1.4.1.9.10.142.2.3.1.8 | cmplsTeP2mpTunnelDestDestination | 0 | 0 | A single destination of this P2MP tunnel. That is, a routable TE address of a leaf. This will often be the TE Router ID of the le… |
1.3.6.1.4.1.9.10.142.2.3.1.9 | cmplsTeP2mpTunnelDestBranchOutSegment | 0 | 0 | This object identifies the outgoing branch from this LSR towards the destination represented by this table entry. It must be a un… |
1.3.6.1.4.1.9.10.142.2.3.1.10 | cmplsTeP2mpTunnelDestHopTableIndex | 0 | 0 | Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this destination of the P2MP tunnel. This obje… |
1.3.6.1.4.1.9.10.142.2.3.1.11 | cmplsTeP2mpTunnelDestPathInUse | 0 | 0 | This value denotes the configured path that was chosen as the explicit path to this destination of this P2MP tunnel. This value r… |
1.3.6.1.4.1.9.10.142.2.3.1.12 | cmplsTeP2mpTunnelDestCHopTableIndex | 0 | 0 | Index into the mplsTunnelCHopTable that identifies the explicit path for this destination of the P2MP tunnel. This path is based … |
1.3.6.1.4.1.9.10.142.2.3.1.13 | cmplsTeP2mpTunnelDestARHopTableIndex | 0 | 0 | Index into the mplsTunnelARHopTable that identifies the actual hops traversed to this destination of the P2MP tunnel. This is aut… |
1.3.6.1.4.1.9.10.142.2.3.1.14 | cmplsTeP2mpTunnelDestTotalUpTime | 0 | 0 | This value represents the aggregate up time for all instances of this tunnel to this destination, if this information is availabl… |
1.3.6.1.4.1.9.10.142.2.3.1.15 | cmplsTeP2mpTunnelDestInstanceUpTime | 0 | 0 | This value identifies the total time that the currently active tunnel instance to this destination has had its operational status… |
1.3.6.1.4.1.9.10.142.2.3.1.16 | cmplsTeP2mpTunnelDestPathChanges | 0 | 0 | This object counts the number of times the actual path for this destination of this P2MP tunnel instance has changed. This object… |
1.3.6.1.4.1.9.10.142.2.3.1.17 | cmplsTeP2mpTunnelDestLastPathChange | 0 | 0 | Specifies the time since the last change to the actual path for this destination of this P2MP tunnel instance. |
1.3.6.1.4.1.9.10.142.2.3.1.18 | cmplsTeP2mpTunnelDestCreationTime | 0 | 0 | Specifies the value of sysUpTime when the first instance of this tunnel came into existence for this destination. That is, when t… |
1.3.6.1.4.1.9.10.142.2.3.1.19 | cmplsTeP2mpTunnelDestStateTransitions | 0 | 0 | This object counts the number of times the status (mplsTeP2mpTunnelDestOperStatus) of this tunnel instance to this destination ha… |
1.3.6.1.4.1.9.10.142.2.3.1.20 | cmplsTeP2mpTunnelDestDiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which any one or more of this row's Counter32 objects experienced a discont… |
1.3.6.1.4.1.9.10.142.2.3.1.21 | cmplsTeP2mpTunnelDestAdminStatus | 0 | 0 | Indicates the desired operational status of this destination of this P2MP tunnel. |
1.3.6.1.4.1.9.10.142.2.3.1.22 | cmplsTeP2mpTunnelDestOperStatus | 0 | 0 | Indicates the actual operational status of this destination of this P2MP tunnel. This object may be compared to mplsTunnelOperSta… |
1.3.6.1.4.1.9.10.142.2.3.1.23 | cmplsTeP2mpTunnelDestRowStatus | 0 | 0 | This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no obje… |
1.3.6.1.4.1.9.10.142.2.3.1.24 | cmplsTeP2mpTunnelDestStorageType | 0 | 0 | The storage type for this table entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar o… |