Reference record for OID 1.3.6.1.4.1.9.9.693
- Parent
- 1.3.6.1.4.1.9.9 (ciscoMgmt)
- Node code
- 693
- Node name
- ciscoServiceControlAttackMIB
- Numeric OID
- 1.3.6.1.4.1.9.9.693
- Type
- OBJECT IDENTIFIER
- ASN.1 notation
-
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoServiceControlAttackMIB(693)}
- IRI notation
- /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoServiceControlAttackMIB
- IRI from OID Repository
- /ISO/Identified-Organization/6/1/4/1/9/9/693
Descriptions may differ between sources. The primary description is shown first.
Primary description: Circitor
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.mib
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.mib
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
Alternative description: Cisco
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Alternative description: MIBdepot
This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.my.txt
Company: None
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network.
Parsed from file CISCO-SERVICE-CONTROL-ATTACK-MIB.my.txt
Company: None
Module: CISCO-SERVICE-CONTROL-ATTACK-MIB
Information from Circitor
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "200905050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
Information from Cisco SMIv1
ciscoServiceControlAttackMIB OBJECT IDENTIFIER ::= { ciscoMgmt 693 }
Information from OID Repository
Information from MIBdepot
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "200905050000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
Information from Cisco
ciscoServiceControlAttackMIB MODULE-IDENTITY
LAST-UPDATED "201308160000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"
DESCRIPTION
"This MIB provides data related to different types of
attacks detected by a service control entity.
A service control entity is a network device which monitors and
controls traffic. The service control entity is used as a
platform for different service control applications which may
perform monitoring operations beyond packet counting and delve
deeper into the contents of network traffic. It provides
programmable stateful inspection of bidirectional
traffic flows and maps these flows with user/subscriber
ownership.
An attack is a malicious network activity with certain traffic
characteristics and which is targeted on a certain network
entity. An attack can be identified by its type, direction,
source address, destination address and ports.
Once an attack is detected, an attack filter is activated based
on the type of the attack and corresponding actions are taken
in
the monitored network - this is referred to as attack start.
For example the attack filter can drop the attacking traffic.
When the attack detector identifies that the attack
characteristics are no longer exist, it ends the mitigation
action - what is referred to as attack end. The attack
mitigation action is also referred to as attack filtering in
this MIB.
The time duration of attack filtering between attack start to
attack end along with the direction (upstream, downstream) is
also maintained by the service control entity. Attack
filtering
can be applied from the subscriber side to the network side, in
the upstream direction. The downstream attack filtering is
done
from the network side to the subscriber side.
This MIB also defines notifications generated by the service
control entity when an attack is detected on a monitored
network."
REVISION "201308160000Z"
DESCRIPTION
"Updates to support traps for global attacks. For this
1. A new trap is introduced: cscaGlobalAttackFilterChange.
2. A new object is introduced: cscaGlobalAtackType to describe
the type of global attack.
3. A 3 groups are introduced:
a. cscaMIBNotificationGroupRev1, deprecating
cscaMIBNotificationGroup.
b. cscaFilterObjectGroupRev1, deprecating
cscaFilterObjectGroup.
c. cscaMIBNotifControlGroupRev1, deprecating
cscaMIBNotifControlGroup
4. A new compliance is introduced:
cscaMIBComplianceRev1, deprecating cscaMIBCompliance."
REVISION "200905050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 693 }
First Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)
Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.9)
Direct children (3)
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.693.0 | ciscoServiceControlAttackMIBNotifs | 2 | 2 | |
| 1.3.6.1.4.1.9.9.693.1 | ciscoServiceControlAttackMIBObjects | 3 | 38 | |
| 1.3.6.1.4.1.9.9.693.2 | ciscoServiceControlAttackMIBConform | 2 | 12 |
Siblings (645)
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.443 | ciscoCommonMgmtMIB | 3 | 37 | MIB module for integrating different elements of managing a device. For example, different device access methods like SNMP, CLI, … |
| 1.3.6.1.4.1.9.9.445 | ciscoQinqVlanMIB | 3 | 25 | This MIB defines configuration and monitoring capabilities relating to 802.1QinQ interfaces. QinQ interfaces are capable of term… |
| 1.3.6.1.4.1.9.9.447 | ciscoScsiFlowMIB | 3 | 99 | A SCSI Flow is described as a SCSI Initiator SCSI Target combination. This MIB is used to configure and monitor SCSI Flows. Gloss… |
| 1.3.6.1.4.1.9.9.448 | ciscoSsmProvMIB | 2 | 26 | This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a c… |
| 1.3.6.1.4.1.9.9.449 | ciscoEigrpMIB | 3 | 103 | Enhanced Interior Gateway Protocol (EIGRP) is a Cisco proprietary distance vector routing protocol. It is based on the Diffusin… |
| 1.3.6.1.4.1.9.9.450 | ciscoCableAdmCtrlMIB | 3 | 123 | This MIB module defines the managed objects enabling the management of Cable Modem Termination System (CMTS) admission control. CM… |
| 1.3.6.1.4.1.9.9.451 | ciscoIpUrpfMIB | 3 | 47 | Unicast Reverse Path Forwarding (URPF) is a function that checks the validity of the source address of IP packets received on an … |
| 1.3.6.1.4.1.9.9.454 | ciscoDot11LbsMIB | 3 | 23 | This MIB module supports network management for Location Based Services on IEEE 802.11 wireless LAN devices. Location Based Serv… |
| 1.3.6.1.4.1.9.9.455 | ciscoImageTc | 0 | 0 | ciscoImageTc MODULE-IDENTITY LAST-UPDATED "200501120000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Custom… |
| 1.3.6.1.4.1.9.9.456 | ciscoDot11WidsMIB | 3 | 50 | This MIB is intended to be implemented on the following IOS based network entities for the purpose of providing network managemen… |
| 1.3.6.1.4.1.9.9.457 | ciscoWdsIdsMIB | 2 | 18 | This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose o… |
| 1.3.6.1.4.1.9.9.458 | ciscoApplianceRedundancyMIB | 3 | 47 | This mib defines the SNMP objects to report the status of High Availability (HA) functionality in Cisco network management applia… |
| 1.3.6.1.4.1.9.9.459 | ciscoBitsClockMIB | 3 | 21 | This MIB provides information on Building Integrated Timing Supply(BITS) clocking sources and modes of operations. It is used to… |
| 1.3.6.1.4.1.9.9.460 | ciscoTpcMIB | 3 | 24 | The MIB module for Third Party Copy(TPC): Third Party Copy derives its name from the fact that there are three entities involved … |
| 1.3.6.1.4.1.9.9.461 | ciscoEtherCfmMIB | 3 | 39 | This MIB module defines the managed objects and notifications for Ethernet Connectivity Fault Management (CFM). CFM is an end-to-e… |
| 1.3.6.1.4.1.9.9.463 | ciscoSanTapMIB | 3 | 30 | MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that p… |
| 1.3.6.1.4.1.9.9.466 | ciscoEthernetAccessMIB | 2 | 20 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge dev… |
| 1.3.6.1.4.1.9.9.467 | ciscoCryptoAcceleratorMIB | 3 | 107 | The MIB module for monitoring the identity, status, activity and faults of crypto accelerator (CA) modules used in devices implem… |
| 1.3.6.1.4.1.9.9.468 | ciscoContextMappingMIB | 2 | 35 | A single SNMP agent sometimes needs to support multiple instances of the same MIB module, and does so through the use of multiple… |
| 1.3.6.1.4.1.9.9.470 | ciscoEnhancedSlbMIB | 3 | 106 | The MIB for managing Server Load Balancing Manager(s), and products supporting Server Load Balancing(SLB) features. This MIB exten… |
| 1.3.6.1.4.1.9.9.471 | ciscoFlexLinksMIB | 3 | 36 | This MIB module is for configuration and status query of Flex Links feature on the Cisco device. Flex Links are a pair of Layer 2… |
| 1.3.6.1.4.1.9.9.472 | ciscoModuleVirtualizationMIB | 3 | 35 | This MIB provides a way to create virtual contexts, and managing them. A virtual context is logical partition of a physical devi… |
| 1.3.6.1.4.1.9.9.473 | ciscoCcaMIB | 3 | 200 | The Cisco Contact Center Applications (CCCA) Management Information Base (MIB) module defines management instrumentation for appl… |
| 1.3.6.1.4.1.9.9.474 | ciscoFilterGroupMIB | 3 | 55 | The MIB module is for creating and configuring object groups to support packet filtering and access control on IP and other proto… |
| 1.3.6.1.4.1.9.9.479 | ciscoCableWidebandMIB | 3 | 77 | This is the MIB module for the support of Channel Bonding Protocol for the Cable Modem Termination System (CMTS). Wideband DOCSIS… |
| 1.3.6.1.4.1.9.9.480 | ciscoL4L7moduleResourceLimitMIB | 4 | 100 | The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in … |
| 1.3.6.1.4.1.9.9.482 | ciscoInterfaceTopNExtMIB | 3 | 16 | This MIB module is an extension to INTERFACETOPN-MIB. It provides additional management information for sorting device interfaces. |
| 1.3.6.1.4.1.9.9.483 | ciscoIpRanBackHaulMIB | 3 | 248 | This MIB provides information on the IP-RAN traffic from cell site to aggregation site in the following situations. In an GSM en… |
| 1.3.6.1.4.1.9.9.484 | ciscoNacNadMIB | 3 | 157 | This MIB module is for the configuration of a Network Access Device (NAD) on the Cisco Network Admission Control (NAC) system. End… |
| 1.3.6.1.4.1.9.9.485 | ciscoRttMonTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not … |
| 1.3.6.1.4.1.9.9.486 | ciscoRttMonIcmpMIB | 3 | 7 | An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such a… |
| 1.3.6.1.4.1.9.9.487 | ciscoRttMonRtpMIB | 3 | 8 | An extension to the CISCO-RTTMON-MIB for Cisco IP SLA RTP operation, Real-Time Transport Protocol(RFC 1889). This operation provi… |
| 1.3.6.1.4.1.9.9.488 | ciscoFirewallTc | 0 | 0 | This MIB module defines textual conventions that are commonly used in modeling management information pertaining to configuration… |
| 1.3.6.1.4.1.9.9.490 | ciscoNetintMIB | 3 | 11 | This MIB module is for Network Interrupt information on Cisco device. |
| 1.3.6.1.4.1.9.9.491 | ciscoUnifiedFirewallMIB | 3 | 235 | Overview of Cisco Firewall MIB ============================== This MIB Module models status and performance statistics pertaining … |
| 1.3.6.1.4.1.9.9.492 | ciscoCefMIB | 3 | 192 | Cisco Express Forwarding (CEF) describes a high speed switching mechanism that a router uses to forward packets from the inbound … |
| 1.3.6.1.4.1.9.9.493 | ciscoCefTextualConventions | 0 | 0 | ciscoCeftextualConventions |
| 1.3.6.1.4.1.9.9.494 | ciscoEntityRedunTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Entity Redundancy MIBs. |
| 1.3.6.1.4.1.9.9.495 | ciscoPsdClientMIB | 3 | 44 | This MIB module manages the client side functionality of the Persistent Storage Device(PSD). This MIB instrumentation is for conf… |
| 1.3.6.1.4.1.9.9.497 | cGgsnSAMIB | 3 | 247 | This MIB module manages the service-aware feature of Gateway GPRS Support Node (GGSN). This MIB is an enhancement of the CISCO-GG… |
| 1.3.6.1.4.1.9.9.498 | ciscoEntityRedunMIB | 3 | 93 | This management information module supports configuration, control and monitoring of redundancy protection for various kinds of c… |
| 1.3.6.1.4.1.9.9.500 | ciscoStackWiseMIB | 3 | 111 | This MIB module contain a collection of managed objects that apply to network devices supporting the Cisco StackWise(TM) technolo… |
| 1.3.6.1.4.1.9.9.504 | ciscoSwitchMulticastMIB | 3 | 108 | This MIB module defines management objects for the Multicast Switching features on Cisco Layer 2/3 devices. Definition of some of … |
| 1.3.6.1.4.1.9.9.505 | cpkiMIB | 3 | 44 | A networking device may provide several security services and protocols like SSL, SSH, IPSec/IKE etc. which need identities … |
| 1.3.6.1.4.1.9.9.507 | ciscoPolicyGroupMIB | 3 | 35 | The MIB module is for configuration of policy and policy group. A policy group can be described as a set of entities identified b… |
| 1.3.6.1.4.1.9.9.508 | ciscoSlbHealthMonMIB | 3 | 62 | An extension to the CISCO-SLB-EXT-MIB for SLB health monitoring probes. SLB: Server Load Balancing. Server load balancing provides… |
| 1.3.6.1.4.1.9.9.509 | ciscoWdsInfoMIB | 3 | 141 | This MIB is intended to be implemented on all Cisco network entities that provide Wireless Domain Services (WDS). The WDS provide… |
| 1.3.6.1.4.1.9.9.510 | ciscoErmMIB, ciscoVoiceLmrMIB | 3 | 176 | This MIB module provides management of voice tone signal as static injected tone for Land Mobile Radio The tone signal includes … |
| 1.3.6.1.4.1.9.9.511 | ciscoCbpTargetTCMIB | 0 | 0 | This MIB module defines Textual Conventions for representing targets which have class based policy mappings. A target can be any … |
| 1.3.6.1.4.1.9.9.512 | ciscoLwappWlanMIB | 3 | 249 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weigh… |